Instruction/ maintenance manual of the product iP4820 Canon
Go to page of 21
Make sure to read this manual before using the printer . Please keep it in hand for future reference. Getting Started Read Me First Canon Inkjet Premium Photo Printer series Symbols Used in This Document Instructions including important information. Prohibited actions.
Describes how to set up and use your printer . Introduces the printer and its functions, the included manuals and application software. Getting Started (this manual) Describes basic operations and media, and gives an introduction to other functions available.
1 2 1 7 6 5 4 3 2 1 1 Preparation Do not install the printer where an object may fall on it. In addition, do not place any object on the top of the printer . It may fall into the printer when opening covers, resulting in malfunction. • A USB cable is necessary to connect the printer with your computer .
1 2 3 A 5 4 B 2 1 Preparation When removing the power plug, make sure that the POWER lamp is not lit before removing the plug. Removing the power plug while the POWER lamp lights up or ashes may cause drying and clogging of the Print Head, resulting in poor printing.
2 123 A B C 3 Install the Print Head Open the Paper Output T ray (A). Open the T op Cover (B). The Print Head Holder (C) moves to the installation position.
4 6 5 D E F 4 2 Install the Print Head Firmly lift the part (D) of the Print Head Lock Lever in the Print Head Holder until it stops. Remove the Print Head from the silver package. Remove the orange protective cap. Do not touch the inside (E) or metal parts (F) of the Print Head.
7 8 5 2 Install the Print Head T ilt the Print Head forward and set it in place as shown. Hold the Print Head Lock Lever rmly and lower it completely . Do not knock the Print Head against the sides of the holder . • Once you have installed the Print Head, do not remove it unnecessarily .
3 123 A B C D 6 Install the Ink T anks 1. Remove the orange tape completely . 2. Remove the protective lm completely . Handle the ink tanks carefully . Do not drop or apply excessive pressure to them. Be sure to use the supplied ink tanks. If the orange tape remains on the L-shape air hole, ink may splash or the printer may not print properly .
4 5 6 7 F E G H 7 3 Install the Ink T anks T ilt the ink tank, then insert it under the label and against the back end of the slot. Press the PUSH mark on the ink tank rmly until it clicks. When the installation is completed properly , the Ink lamp lights red.
4 8 Quit all applications before installation. Log on as the administrator (or a member of the Administrators group). • • T o use the printer by connecting it to a computer , software including the drivers needs to be copied (installed) to the computer's hard disk.
2 1 A 3 3 9 4 Install the Software T urn on the computer , then insert the Setup CD-ROM into the CD- ROM drive. If the program does not start automatically , double-click the CD-ROM icon in Computer or My Computer , then double- click MSETUP4.EXE . • If you are using Windows, the setup program starts automatically .
5 4 10 4 Install the Software Click Install . Click Easy Install . The drivers, application software, and on-screen manuals are installed. If you want to select particular items to install, click Custom Install .
H E B D F G C 11 4 Install the Software When the serial number is not displayed on the registration screen automatically , input the serial number located inside the printer (as shown in the illustration). Necessary Information for the User Registration □ If the power is on, the Print Head Holder will move when the T op Cover (H) is opened.
6 7 12 4 Install the Software If the Extended Survey Program screen appears □ If you can agree to Extended Survey Program, click Agree . If you click Do not agree , the Extended Survey Program will not be installed. (This has no effect on the printer's functionality .
5 1 3 2 C D E F G A B 13 Load Paper Close the Paper Output T ray (C), pull out the Cassette (D) and remove the Cover (E). Pull the T ab (F) in the direction of the arrow and extend the Cassette. Move the left Paper Guide (G) to the edge. With the printer , the paper source varies depending on the media type.
4 6 5 7 I H 14 5 Load Paper Load plain paper . Load paper with the printing side facing down. Slide the front Paper Guide (H) to align with the actual size of the paper . The front Paper Guide will click and stop when it aligns with the corresponding mark of paper size.
2 8 9 1 0 1 1 J L K M 15 5 Load Paper Open the Paper Support (J), and pull it up. Move the Paper Guides (K) to both edges. Load paper in the center of the Rear T ray (L). Load paper in portrait orientation with the printing side facing up. Slide the left and right Paper Guides against both edges of the paper .
6 16 Solution Menu EX is a gateway to functions and information that allow you to make full use of the printer! For example, Solution Menu EX V arious application software are installed on the computer along with the drivers. Y ou can print creative items by correcting/enhancing photos using the application software.
1 3 2 4 A B C 17 6 T ry Using the Printer Load 4" x 6" (10 x 15 cm) photo paper in the Rear T ray (A) in portrait orientation with the printing side facing up. (For details, refer to page 15.) Make sure that the Paper Output T ray (B) is open.
7 18 Specifications General Specications Printing resolution (dpi) 9600* (horizontal) X 2400 (vertical) * Ink droplets can be placed with a pitch of 1/9600 inch at minimum. Interface USB Port: Hi-Speed USB* Direct Print Port: PictBridge * A computer that complies with Hi-Speed USB standard is required.
QT5-3095-V01 XXXXXXXX ©CANON INC.2010 PRINTED IN THAILAND Email T ech Support — www .canontechsupport.com The following ink tanks are compatible with this printer . Getting Help from Canon This option provides live telephone technical support, free of service charges, Monday-Friday (excluding holidays), during the warranty period .
An important point after buying a device Canon iP4820 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon iP4820 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon iP4820 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon iP4820 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon iP4820 will certainly help you make a decision on the purchase.
If you already are a holder of Canon iP4820, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon iP4820.
However, one of the most important roles played by the user manual is to help in solving problems with Canon iP4820. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon iP4820 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
