Instruction/ maintenance manual of the product IP1000 Canon
Go to page of 24
T able of Content s Preface 1 Shipping Mater ials 1 Introduction 1 Setting Up 2 Preparing t he Printer 2 Connecting the Printer to the Computer 3 Installing the Print Head 4 Loading Paper 7 Installing.
Exif Print This printer supports Exif Print. Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant digital camera, the camera’ s image data at the time of shooting is used and optimized, yielding extremely high quality prints.
1 Preface Shipping Materials Thank you for purchasing a Canon Bubble Jet Printer . Check that all the following items are in the box. If anything is missing or is damaged, contact your local Canon sales representative.
2 Setting Up 1 Pre paring the Printer 1 Place the printer on a flat surface. 2 Remove the tape from the printer as shown. The tape position is subject to change. 3 Open the Front Cover and remove the tape and the shipping material. 4 Close the Front Cover .
3 2 Connecting the Printe r to the Computer Use a USB cable. Recommended: Canon or other computer manufacturer cab le, up to 5 meters in length. Follow the step s belo w to inst all the printer driver correctly . 1 Ensure that the printer and the computer are turned off.
4 3 Installing the Print Head • Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands are wet. • Never damage, modify , stretch, or excessively bend or twist the power cord. Do not place heavy objects on the power cord.
5 5 Remove the protective cap from the Print Head. 6 Place the Print Head in the holder . 7 Lock the Print Head into place by lowering the lever . Do not touch the Lock Lever once the Print Head has been installed. • Do not touch th e Print Head Nozzles or electrical c ontacts.
6 Inst alling the Ink T anks • For safety reasons, store ink tanks out of the reach of small children. • Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands. 1 T ake out the black ink tank. 2 Hold the ink tank as shown in the diagram and remove the protective cap.
7 4 Loading P aper Loading A4 (Letter) Size Plain Paper 1 Open the Paper Support as shown. 2 Load the paper , aligning it with the right side of the Auto Sheet Feeder . Y ou can load a maximum of 100 sheets of plain paper (64 gsm). Do not exceed this limit.
8 5 Installing the Printer Driver Inst alling the Printer Driver – Windows 1 Ensure that the printer and computer are turned off. 2 T urn on the computer and st art Windows. If any applications automatically run, quit them. Disable any virus detection programs.
9 3 Place the Setup Software & User’s Guide CD-ROM in the CD-ROM drive. 4 Follow the instructions displayed on screen. When the screen shown on the left is displayed, click Easy Inst all . 5 When the list of applications to inst all appears, verify the contents, click Inst all , then follow the instructions on the screen.
10 8 Click OK . Some screens appear after clicking OK . Read the content shown on the screens and click Next . 9 When the screen shown on the lef t appears, click Exit . Y ou can restart the system by clicking Restart , which will appears when you check the check box.
11 Inst alling the Printer Driver – Macintosh 1 T urn on the Mac. 2 Place the Setup Software & User’s Guide CD-ROM in the CD-ROM drive. 3 Double-click the Mac OS X folder , and then double-click the Printer Driver folder . 4 Double-click PIXMA iP1000 270.
12 7 Select a destination to where you want to install the printer driver , and click Continue . 8 Click Inst all . 9 Enter an administrator name and a password, then click OK . 10 A message asking for your confirmation to restart your comp uter is displayed on the screen.
13 Basic Operations • If you detect smoke, unusual smells or strange noises around the printer , immediately switch the printer off and always unplug the printer . Contact your local Canon service representative. • T o avoid injury , never put your hand or fingers inside the printer while it is printing.
14 Basic Print Settings For the best print quality , specify the minimum requirement settings in the Main tab. T o get the best results, ensure that you select the type of media loaded in th e printer when printing on paper other than plain paper .
15 Printing with Macintosh Adjusting the print settings according to your need s allows you to produce better quality prints. Printing 1 Open the Page Setup dialog box in your application. On the File menu, click Page Setup . Check the application’ s user ’ s manual for the actual procedures.
16 Page Setup Use the Page Setup dialog box to specify the Paper Size settings. Basic Print Settings For the best print quality , specify the minimum requi rement settings in the Print dialog box. Sele ct Quality & Media from the pop-up menu to cha nge the display of the dialo g box.
17 Print Head Maintenance If Blurring Occurs or If a Specific Color Does Not Print Perform print head cleaning to improve the print quality . Ensure that the printer is turned on and follow the instructions below . Windows Open the printer driver settings screen and click the Maintenance tab.
18 2 Install the new ink t ank. Close the Front Cover when finished. When you enable the low in k warning, reset the ink counter of the ink tank installed. Refer to the User ’ s Guide for more detailed procedures and information about maintenance. iP1000_QSG.
19 Appendix Notes on Handling the USB Interface (for W indows Users) If installation of the printer driver does not proceed as instructed in this Quick S tart Guide , there may be a problem with the USB driver installation. T ry reinstalling the printer driver .
20 Applications Included in the CD-ROM Package Easy-PhotoPrint (Windows/Macintos h) Y ou can make a Borderless Print easily and quic kly , just by selecting a photograph taken with a digital camera and the paper type on which to print. Also it has tools to correct red eye caused by the camera’ s flash or smooth and beautify the facial skin.
Exif Print This printer supports Exif Print. Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant digital camera, the camera’ s image data at the time of shooting is used and optimized, yielding extremely high quality prints.
T able of Content s Preface 1 Shipping Mater ials 1 Introduction 1 Setting Up 2 Preparing t he Printer 2 Connecting the Printer to the Computer 3 Installing the Print Head 4 Loading Paper 7 Installing.
An important point after buying a device Canon IP1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon IP1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon IP1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon IP1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon IP1000 will certainly help you make a decision on the purchase.
If you already are a holder of Canon IP1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon IP1000.
However, one of the most important roles played by the user manual is to help in solving problems with Canon IP1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon IP1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
