Instruction/ maintenance manual of the product IMAGE STABILIZER EF70-200MM F/4L IS USM Canon
Go to page of 16
EF70-200mm f/4L IS USM Instruction ENG C OP Y.
ENG-1 The Canon EF70-200mm f/4L IS USM lens is a lightweight, compact, high-perf ormance telephoto z oom lens with an Image Stabilizer f or EOS cameras. • "IS" stands for Image Stabiliz er . • "USM" stands for Ultr asonic Motor .
ENG-2 a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision.
ENG-3 Nomenc lature Hood mount ( → 6) Filter mounting thread ( → 12) Focusing ring ( → 5) Focusing distance range selection switch ( → 5) Image stabilizer switch ( → 7) Image stabilizer mode.
ENG-4 See your camera’ s instr uctions f or details on mounting and detaching the lens. • After detaching the lens, place the lens with the rear end up to prev ent the lens surface and electrical contacts from getting scratched.
ENG-5 Y ou can set the focusing distance range to 1.2 m/3.9 ft. to infinity or 3 m/9.8 ft. to infinity . By setting the suitable f ocusing distance range , the actual autofocusing time can be shorter .
ENG-6 4. Zooming To z oom, turn the zoom ring. Be sure to finish zooming bef ore focusing. Zooming after focusing can aff ect the f ocus. 5. Hood The ET -74 hood can keep unwanted light out of the lens, and also protects the front of the lens from rain, snow , and dust.
ENG-7 Y ou can use the image stabilizer in AF or MF mode. 6. Image Stabilizer Settings Select the stabilizer mode. • MODE 1: Corrects vibrations in all directions.
ENG-8 7. Tips on Using the Image Stabilizer • In semi-darkened areas such as indoors or outdoors at night. • In locations where flash photograph y is prohibited, such as ar t museums and theater stages. • In situations where your f ooting is uncer tain.
ENG-9 Tips on Using the Image Stabilizer • The Image Stabilizer cannot compensate f or a b lurred shot caused b y a subject that moved. • Set the ST ABILIZER s witch to when you are taking pictures using the Bulb setting (long e xposures). If the ST ABILIZER s witch is set to , the image stabilizer function ma y introduce errors.
ENG-10 8. Infinity Compensation Mark The infrared inde x corrects the focus setting when using monochrome infrared film. Focus on the subject manually , then adjust the distance setting b y moving the f ocusing ring to the corresponding infrared inde x mark.
ENG-11 10. Using the T ripod Mount (Sold separately) Adjusting the Rev olving Mount This lens can be used with the A II (W) tripod mount r ing, sold separately . Y ou can loosen the or ientation lock-knob on the tripod mount to allow it to rotate as needed to fit a par ticular camera model f or switching betw een vertical and hor izontal positions.
ENG-12 Y ou can attach filters to the filter mounting thread on the front of the lens. 11. Filters (Sold separately) Y ou can attach Extension T ube EF12 II or EF25 II for magnified shots . The shooting distance and magnification are shown below . 12.
ENG-13 •A utofocusing is still enab led with Extender EF1.4X II attached. • When an Extender is attached, the AF speed will become slower b y design to retain proper AF control. • First attach the Extender to the lens, then attach the lens to the camera.
ENG-14 14. Specifications Focal Length & Max. Aperture 70 – 200 mm, f/4 Lens Construction 20 elements in 15 groups Min. Aperture f/32 Angle of View Diagonal: 34° – 12° V er tical: 19°30’ – 7° Horizontal: 29° –10° Min. Focusing Distance 1.
© CANON INC. 2006 CT1-7568-005 2009.7 C OP Y.
An important point after buying a device Canon IMAGE STABILIZER EF70-200MM F/4L IS USM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon IMAGE STABILIZER EF70-200MM F/4L IS USM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon IMAGE STABILIZER EF70-200MM F/4L IS USM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon IMAGE STABILIZER EF70-200MM F/4L IS USM you will learn all the available features of the product, as well as information on its operation. The information that you get Canon IMAGE STABILIZER EF70-200MM F/4L IS USM will certainly help you make a decision on the purchase.
If you already are a holder of Canon IMAGE STABILIZER EF70-200MM F/4L IS USM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon IMAGE STABILIZER EF70-200MM F/4L IS USM.
However, one of the most important roles played by the user manual is to help in solving problems with Canon IMAGE STABILIZER EF70-200MM F/4L IS USM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon IMAGE STABILIZER EF70-200MM F/4L IS USM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
