Instruction/ maintenance manual of the product 111 K - W/D/G AEG
Go to page of 20
AUS ERFAHRUNG GUT 1 1 1 K - W/D/G Electric hob Table de cuisson électrique Oper ating Instructions Notice d’utilisation.
2 Important Safety Information Y ou MUST r ead these warning s car efully befor e installing or u s ing the hob. If you need ass i stance, contact our Cu stomer Car e Department on 0 1635 5727 00 In s.
3 ● Do not use this hob if it is in contact with water . Do not oper ate the hob with wet hands. ● Ensur e the control knobs ar e in the ‘OFF’ position when not in use. ● When using other electrical appliances, ensur e the cable does not come into contact with the hot surfaces of the cooking appliance.
4 Content s Important Safety Information .................................................................... 2 In structions for the U ser .............................................................................. 6 Description of the Hob .......
5 This appliance is manufactured accor ding to the following EEC directives: 73/23 EEC - 90/683 EEC - 93/68 EEC - 89/336 EEC - 90/396 EEC, current edition.
6 Description of the Hob INST ALLA TION The hob must be installed according to the instructions supplied. The hob must be installed by qualified personnel to the relevant British Standards. Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown.
7 Oper ation i ELECTRIC HO TPLATES To switch on a hotplate, turn the r elevant contr ol knob anticlockwise to the requir ed heat setting. The control knob is number ed 1 - 3 0 - OFF 1 - Minimum 3 - Maximum. The hob has four rapid hotplates. The r apid hotplates are indicated by a r ed dot, and will heat up more quickly than a normal plate.
8 i Hint s and Tips Saucepans for use on solid plates should have sever al char acteristics: ● They should be fairly heavy duty ● They should fit the heat ar ea exactly , or be slightly larger for efficient use, NEVER smaller . ● They should have a flat base to ensure good contact with the plate.
9 Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob fr om the electricity supply . The hob is best cleaned whilst it is still warm, as spillage can be r emoved more easily than if it is left to cool.
10 Something Not W orking? If the hob is not working corr ectly , please carry out the following checks before contacting your local AEG Service For ce Centr e.
11 Service and Spar e P art s When you contact the Service Centr e, they will need the following information: 1. Y our name, addr ess and post code. 2. Y our telephone number 3. Clear and concise details of the fault 4. The model and the serial number (see rating label on the back of this instruction booklet) 5.
12 Guar antee Condition s AEG offer the following guarantee to the fir st purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handled over to the first r etail purchaser , which must be verified by purchase invoice or similar documentation.
13 OVERALL DIMENSIONS Width: 580 mm. Depth: 500 mm. Height: 88 mm. W eight: 1 1 Kg. CUT OUT DIMENSIONS Width: 550 mm. Depth: 47 0 mm. Thickness: 30 mm. SUPPL Y CONNECTIONS Electric: 230-240V 50Hz supply . HEA TING ELEMENTS RATING Rapid Fr ont Left Hotplate Ø 180 mm.
14 650 mm 420 mm 420 mm 100 mm 50 mm 50 mm 55 mm 600 mm 700 mm 420 mm 100 mm 420 mm 50 mm 55 mm 50 mm CLEARANCES REQUIRED WHEN FITTING THE HOB WITHOUT A COOKER HOOD ABOVE CLEARANCES REQUIRED WHEN FITT.
15 In stallation IMPORT ANT This hob must be installed by qualified personnel to the r elevant British Standards. The manufactur er will not accept liability , should the above instructions or any of the other safety instructions incorpor ated in this book be ignor ed.
16 ON/OFF SWITCH FLEX OUTLET ON/OFF SWITCH FLEX OUTLET FO 0763 FO 0764 1 2 Building over a kitchen unit with door Proper arr angements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated.
17 Fitting the hob to the worktop Before fitting the hob into the cut out, a sealing gasket supplied with the hob must be fitted to the edge of the cut out. It is essential that no gaps are left in this seal in or der to prevent spillage near the hob seeping into the cabinet below .
18 Electrical connection s Any electrical work requir ed to install this hob should be carried out by a qualified electrician or competent per son, in accordance with the current r egulations. THIS HOB MUST BE EARTHED. The manufactur er declines any liability should these safety measures not be observed.
19 Connection Min. size Cable / flex Fuse via Cable/flex type • Cooker 6 mm 2 PVC/PVC 30 A Control twin and Circuit earth For Uk u se only For Eur ope use only Min.
20 Wiring diagr am 432 1 4 3 1 2 5 P 2 P 1 P 3 1 432 1 4 3 1 2 5 P 2 P 1 P 3 2 432 1 4 3 1 2 5 P 2 P 1 P 3 3 432 1 4 3 1 2 5 P 2 P 1 P 3 4 PLA TE Ø 180 Ø 180 R Ø 145 R Ø 145 N L L 4 1 3.
An important point after buying a device AEG 111 K - W/D/G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG 111 K - W/D/G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG 111 K - W/D/G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG 111 K - W/D/G you will learn all the available features of the product, as well as information on its operation. The information that you get AEG 111 K - W/D/G will certainly help you make a decision on the purchase.
If you already are a holder of AEG 111 K - W/D/G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG 111 K - W/D/G.
However, one of the most important roles played by the user manual is to help in solving problems with AEG 111 K - W/D/G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG 111 K - W/D/G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
