Instruction/ maintenance manual of the product H12-4608 Canon
Go to page of 97
PIXMA MP760 SER VICE MANUAL Ca non Copyright 2005, Canon U.S.A. This technical publication is the proprietary and confidential information of Canon U.S.A. which shall be retained for reference purposes by Authorized Service Facilities of Canon U.S.A. Its unauthorized use is prohibited.
PIXMA MP760 SERVICE MANUAL REVISION 0 PIXMA MP760 H12-4602 120V USA PIXMA MP760 H12-4603 230V EMB PIXMA MP760 H12-4604 230V GB PIXMA MP760 H12-4605 230V EUM PIXMA MP760 H12-4606 120V CND PIXMA MP760 H12-4608 230V AUS PIXMA MP760 H12-4609 230V AE HY8-13A4-000 COPYRIGHT2004 CANON INC.
Scope This manual has been issued by Canon Inc., to provi de the service tech nicians of this pro duct with the informat ion necessary for qua lified persons t o learn techni cal theory, in stallation, maintenan c e, an d repair of products. T he manual covers inf ormation applicable in a ll regions where the produ ct is sold.
I. MANUAL OUTLINE This manual consists of the following three parts to provide in formation necessa ry to service the PIXMA MP760: Part 1: Maintenance Informat ion on maintenance and troublesho oting .
II. TABLE OF CONTENTS Part 1: MAINTENANCE 1 - 1 1. MAINTENANCE 1 – 1 1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, an d Replacement Consumables by Service Engineer 1 - 3 1-2. Custom er Maintenance 1 - 3 1-3. Product Life 1 - 4 1-4.
1 - 67 3-8-1 EEPROM inform ation print 1 - 69 4. Cleaning Y our Machine 1 - 69 4-1 Caution 1 - 69 4-2 Cleaning t he Exterior 1 - 69 4-3 Cleaning t he Scan area 1 - 70 4-4 Cleaning t he Interior 1 - 70 4-5 Cleaning t he Paper Feed Rollor 1 - 71 4-6 Cleaning t he Bottom Plate 1 - 72 5.
Part 1 Maintenance.
1 - 1 1. MAINTENANCE 1-1 Adjustment, Periodic Ma intenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer (1) Adjustment Adjustme nt Timing Purpose Tool Approx time ALL C.
1 - 2 Adjustme nt Timing Purpose Tool Approx time Print head alignment - At print head replacement - A t SPCNT BOARD ASS’Y replacement To ensure accurate dot placement.
1 - 3 (3) Periodic replacement par ts Adjustm ent Timing Purpose T ool Approx. time None (4) Replacem ent con su mables Adjustm ent Timing Purpose T ool Approx. time None 1-2 Customer Maintenance Adjustm ent Timing Purpose T ool Approx. time Print head alignment At print head replacement.
1 - 4 1-3 Product Life (1) Main body Specified print volum e (a), (b), or the yea rs of use (c), whicheve r comes first. (a) Scanning Section: 15, 0 0 0 page s (b) Printin g Section: 18,0 00 pages Copy Print 1,500 cha racter pattern + Post card Address printing 3,420 pages 3,96 0 pa ges Bk 1,500 cha racter pattern - - A4, 7.
1 - 5 1-5 Serial Number Label Location On the right side of the backside in the bottom case (close to the rating plate) Figure1-1 Serial Numb er Label Location.
1 - 6 2. LIST OF ERROR DISPLAY / INDICATION User error messages Look for the ap plicable e rror message and e x ecute the ap p ropriate co untermeasure s.
1 - 7 Note: This error messag e means the same as service err or cod es ##338 and ##340 . When this error o ccur s in this model, it is not treated as a service error , but as a user error , and the error message is dis played. “Scanning Unit (Printer Cover) is open.
1 - 8 “Error during scanning memory card. Pull th e card and tur n the machine off and on.” Cause: Data in the memory card cannot be acc essed. Solution: Check the data in the memory card from a digital camera. Check the connection b e tween the multi-card board and the SPCNT board.
1 - 9 2-2 New Error Codes and Recovery Methods Those error codes that have b een added starting with the pro duct and those error cod es for which remedies unique to the product are o ffered are shown together with causes and remedies, where applicable.
1 - 10 ##355 Lit-up motor for CD-R print malfunctioned Cause: In performing a CD-R print, the motor to lift up the carriag e shaft is malfunctioned. Solution:(1) Tu rn off and then on the power. (2) Check the connection from the SHEET F EED unit to the SPCNT board ass’y (JPM1).
1 - 1 1 ##362 Mot or driver malfunct ioned error Cause: The motor driver is malfunctioned due to heating, etc. Solution: (1) T o reboot, press [OK] bu tton or turn off and then on the power .
1 - 12 Symptom Solution Remarks The paper is not feed properly. (The Paper feed motor does not run.) 1) Check the connection from the sheet feed unit to the SPCNT board assy (JPM1). (2) Replace the sheet feed unit. (3) Replace the SPCNT board ass’y.
1 - 13 Symptom Solution Remarks • The printer does not at all. • Printing stops midway. • Certain colors are not printed. (1) Remove the printhead and re-install it. (2) Carry out nozzle cleaning on the printhead five times with the cleaning operation, than visually cheek the test print for non-discharge of ink from nozzle .
1 - 14 Symptom Solution Remarks Nothing is printed. (1) Check the connection between the contact sensor and SPCNT board (JCCD1). (2) Replace the SCANNER unit. (3) Replace the SPCNT board ass’y. The image has vertical stripes. (1) Clean the Document glass.
1 - 15 Missing dots Unstable printing Splashed dots Figure1-2 Defective P attern (Sample).
1 - 16 3. REP AIR 3-1 Notes on Service Part Replacem ent (and Disassembling / Reassembling) Service part Notes on replacement*1 Adjustment / settings Operation check SPCNT BOARD ASS’Y (HY7-322 3) - Before removal o f the SPCNT board ass'y, remove the power cord, and allow for approx.
1 - 17 Service part Notes on replacement*1 Adjustment / settings*2 Operation check LIFT CAM S HAFT (HY7-2902) - Grease application to the sliding portions [See 3-3. Adjustment / Settings, 3-3-7 Grease application.] After replaceme nt: 1. LIFT CAM SHAFT phase adjustment See 3-3.
1 - 18 Figure1-3 S olenoid Cam Gear Figure1-4 LEFT COVER Figure1-5 RIGHT COVER The following photos show th e left and the ri ght cover cl aws. Align them for assem bling. T o attach the P APER EXIT TRA Y UNIT , align the tray with the T- p art of the Solenoid Cam Gea r to insert.
1 - 19 3-2 Special Notes on Repair Servicing 3-2-1 Flexible cable and harn ess wiring, connection Be careful of wiring of the flexible cables and harness. Improper wiring or connection may cause breakage of a line, leading to ignition or emission of smoke.
1 - 20 (2) SPCNT BOARD ASS’Y wiring Figure 1-8 SPCNT BOARD ASS’Y wiring SPCNT BOARD (JPSU1) - POWER SUPPL Y UNIT SPCNT BOARD (JSOL1) - SOLENOID SPCNT BOARD (JCDR1)- Memory card BOARD SPCNT BOARD (.
1 - 21 (3) RELAY BOARD ASS’Y wiring Figure1-9 RELAY BOARD ASS’Y wiring (4) POWER SUPPLY UNIT wiring Figure1-10 POWER SUPPLY UNIT wiring RELA Y BOAR D (JSNS1) - PF Encoder / PF PE Encoder / AP Enco.
1 - 22 3-3 Adjustment / Settings 3-3-1 P APER FEED MOTOR Adjustment Perform the following a djustments when the paper feed motor unit is replaced: 1) When attaching the m otor, fasten the screws so that the belt is properly stretched (in the direction in dicated by the blue arrow in the f igure below).
1 - 23 (a) (b) (c) ASF ARM LOCK LEVER (d) CAPPING (3) Install the LEFT GEAR 1 by aligning it on the cutout of the CR SHAFT CAM R. Figure 1-12 CARRIAGE SHAFT gear adjustment Align the two parts so that both surfaces shown at the top are horizontal. Or , adjust so that the p art of the C R SHAFT CAM R shown at the botto m is just at the bottom.
1 - 24 3-3-3 Positioning in LIFT CAM SHAFT ASS’Y adjustment (1) Remove the PRESSURE ROLLER SPRING from the hook of the chassis, and apply it to the gash of the LIFT CAM SHAFT ASS’Y .
1 - 25 3-3-4 SOLENOID CAM location (1) Install the spring so that the Short end of the spring is at the top and the Long end of the spring is at the bottom.
1 - 26 3-3-6 Applying White Sheet (1) Rib bum ps are provi ded on the ri ght side and the bottom si de of the F AU (Film Adapter Unit) Protective She et.
1 - 27 NG Example: The e dges of the white sheet are located on the scanner top cover . Figure1-19 Location confirmation to apply the white sheet (the rear side and the right side) (NG example).
1 - 28 3-3-7 Grease application Figure 1-20 Grease application1 (1) (9) (10) (2) (3) (4) (2) (8).
1 - 29 Figure 1-21 Grease application2 Part name Where to appl y grease / oil Grease / oil name Grease / oil amount 1 Entire surface the CARRIAGE SLIDER conta cts FLOIL KG107A Chassis 2 CARRIAGE SHAFT.
1 - 30 3-3-8 Waste ink counter setting When the SPCNT board ass'y is replaced, check th e am ount of the waste ink capacity before the replacement. After the replacem ent, register th e amount of the waste ink capacity on the new SPCNT board ass’y that has been replaced.
1 - 31 Date Di spla y YYYY/MM/D D * MM/DD/ YYYY * DD/MM/ YYYY Memory Card Protect * On OFF Slide Show * Fast Fine (USA) (EUROPE) Languages Se lectio n * ENGLISH * ENGLISH FRANCAIS FRANCAIS ESPANOL ESP.
1 - 32 [FI LM] [Menu] Color Negative Fil m Single- photo Print Black & White Negative Multi-photo s Print Color Positiv e F il m Printing All Ph oto Special Photo P rint 35mm Slide Print all Pho t.
1 - 33 3-5. SERVICE SWITCHES 3-5-1 Hardware Switches There is no service hardware switch on the Circuit board. 3-5-2 Service Data Setting Service data can be checked and changed with items on display menus. The effective SSSWs/ parameters and their default va lues in this m achine are shown in Service menu in this chapter.
1 - 34 3-5-3 Service Data Registration / Setting Method Service data can be registered/set by the following operatio ns: (1) User data mode selection Press the Menu key. Standby(Copy Mode) (2) Sevice data mode selection Press the SCAN, COPY, and then SCAN button.
1 - 35 3-5-4 Service Data Flowchart #1 SSSW Bit Service Data Error management Not used Not used Not used Not used Scan condition settings Not used Not used Not used Not used Not used Page timer settin.
1 - 36 #5 TYPE (Type setting) U.S.A. EUROPE U. K. SWEDEN SWISS AUSTRIA DENMARK NORWAY HOLLAND BELGIUM AUSTRALIA FINLAND N. Z. ITALY SPAIN PORTUGAL IRELAND HONG KONG CYGNUS-P HONG KONG MALAYSIA HUNGARY.
1 - 37 #7 PRINTER (Printer function settings) #1 SSSW SW01 SW06 SW07~20: SW20 Not used Not used Not used Leading edge margin T railing edge margin (Blac k pr inting) Not used SUCTION 01: 18 (mm) 02: 0.
1 - 38 #8 CLEAR #9 ROM TEL USER SW SER VICE SW NCU SER VICE DA T A REPOR T COUNTER ALL Dialling data initialization User data and ser vice data #1 to #3 initialization User data and ser vice data #1 t.
1 - 39 3-5-5 Explanation of service data a) SSSW (Service Soft Switch settings) The items registered and set by each of these switche s comprise 8-bit switches. The figure below shows which num bers are assigned to whi ch bits. Each bit has a value of eith er 0 or 1.
1 - 40 3-5-6 New SSSWs/parameters added to this model #1 SSSW (service soft switch setting) SW01 (service soft switch 01: error management) Bit Function 1 0 0 Service error c ode Output Not output 1 E.
1 - 41 #7 PRINTER (printer function settings) 2. NUMERIC PA RAM. No. Function Selecting range Default setting 05 Trailing edge m argi n 0 ~ 9999 5 ( 5 mm) [Parameter 05] Sets the print image trailing edge margin. 5. INK ABS CAPA This switch allows the waste i nk capacity stored in the PCNT board to be c hecked or entered.
1 - 42 3-5-7 SSSW Default Setting TYPE U.S.A. EUROPE U.K. SWEDEN SWISS AUSTRIA #1 SSSW SW01 00000000 00010000 000100 00 00010000 00010000 0001 0000 SW02 00000000 00000000 000000 00 00000000 00000000 0.
1 - 43 TYPE U.S.A. EUROPE U.K. SWEDEN SWISS AUSTRIA SW31 00000000 00000000 000000 00 00000000 00000000 00000000 SW32 00000000 00000000 000000 00 00000000 00000000 00000000 SW33 00000000 00000000 00000.
1 - 44 TYPE DENMARK NOR W A Y HOLLAND BELGIUM AU STRALIA FINLAND #1 SSSW SW01 00010000 00010000 000100 00 00010000 00010000 0001 0001 SW02 00000000 00000000 000000 00 00000000 00000000 0000 0000 SW03 .
1 - 45 TYPE DENMARK NOR W A Y HOLLAND BELGIUM AU STRALIA FINLAND SW31 00000000 00000000 0000 0000 00000000 00 000000 00000000 SW32 00000000 00000000 0000 0000 00000000 00 000000 00000000 SW33 00000000.
1 - 46 TYPE N.Z IT AL Y SP AIN POR TUGAL IRELAND HONG KONG #1 SSSW SW01 00010000 00010000 000100 00 00010000 00010000 0001 0000 SW02 00000000 00000000 000000 00 00000000 00000000 0000 0000 SW03 000000.
1 - 47 TYPE N.Z IT AL Y SP AIN POR TUGAL IRELA ND HONG KONG SW31 00000000 00000000 0000 0000 00000000 00 000000 00000000 SW32 00000000 00000000 0000 0000 00000000 00 000000 00000000 SW33 00000000 0000.
1 - 48 TYPE MALA YSIA HUNGAR Y SAF KOREA CHINA GERMAN #1 SSSW SW01 00010000 00010000 000100 00 00010000 00010000 0001 0000 SW02 00000000 00000000 000000 00 00000000 00000000 0000 0000 SW03 00000000 00.
1 - 49 TYPE MALA YSIA HUNGAR Y SAF KORE A CHINA GERMAN SW31 00000000 00000000 0000 0000 00000000 00 000000 00000000 SW32 00000000 00000000 0000 0000 00000000 00 000000 00000000 SW33 00000000 00000000 .
1 - 50 TYPE FRANCE SINGA PORE CZECH SLOVENIA CANADA JAP AN #1 SSSW SW01 00010000 00010000 000100 00 00010000 00000000 0001 0000 SW02 00000000 00000000 000000 00 00000000 00000000 0000 0000 SW03 000000.
1 - 51 TYPE FRANCE SINGA PORE CZECH SLOVENIA CANADA JAP AN SW31 00000000 00000000 0000 0000 00000000 00 000000 00000000 SW32 00000000 00000000 0000 0000 00000000 00 000000 00000001 SW33 00000000 00000.
1 - 52 TYPE RUSSIA ASIA POLAND EUROPE2 ST ANDARD #1 SSSW SW01 00010000 00010000 000100 00 00010000 00010000 SW02 00000000 00000000 000000 00 00000000 00000000 SW03 00000000 00000000 000000 00 00000000.
1 - 53 TYPE RUSSIA ASIA POLAND EUROPE2 ST ANDARD SW31 00000000 00000000 0000 0000 00000000 00 000000 SW32 00000000 00000000 0000 0000 00000000 00 000000 SW33 00000000 00000000 0000 0000 00000000 00 00.
1 - 54 TYPE U.S.A. EUROPE U.K. SWEDEN SWISS AUSTRIA #3 NUMERIC Param 01: 0 0 0 0 0 0 02: 10 10 10 10 10 10 03: 15 15 15 15 15 15 04: 12 12 12 12 12 12 05: 4 4 4 4 4 4 06: 4 4 1 4 4 4 07: 350 350 350 3.
1 - 55 TYPE DENMARK NOR W A Y HOLLAND BELGIUM AU STRALIA FINLAND #3 NUMERIC Param 01: 0 0 0 0 0 0 02: 10 10 10 10 10 10 03: 15 15 15 15 15 15 04: 12 12 12 12 12 12 05: 4 4 4 4 4 4 06: 4 4 4 4 4 4 07: .
1 - 56 TYPE N.Z IT AL Y SP AIN POR TUGAL IRELAND HONG KONG #3 NUMERIC Param 01: 0 0 0 0 0 0 02: 10 10 10 10 10 10 03: 15 15 15 15 15 15 04: 12 12 12 12 12 12 05: 4 4 15 4 4 4 06: 4 4 3 4 4 1 07: 350 3.
1 - 57 TYPE MALA YSIA HUNGAR Y SAF KORE A CHINA GERMAN #3 NUMERIC Param 01: 0 0 0 0 0 0 02: 10 10 10 10 10 8 03: 15 15 15 15 15 15 04: 12 12 12 12 12 6 05: 4 4 4 4 4 4 06: 4 4 4 4 4 4 07: 350 350 350 .
1 - 58 TYPE FRANCE SINGA PORE CZECH SLOVENIA CANADA JAP AN #3 NUMERIC Param 01: 0 0 0 0 0 0 02: 8 10 10 10 10 10 03: 15 15 15 15 15 15 04: 12 12 12 12 12 12 05: 4 4 4 4 4 4 06: 4 4 4 4 4 4 07: 350 350.
1 - 59 TYPE RUSSIA ASIA POLAND EUROPE2 ST ANDARD #3 NUMERIC Param 01: 0 0 0 0 0 02: 10 10 10 10 10 03: 15 15 15 15 15 04: 12 12 12 12 12 05: 4 4 4 4 4 06: 4 4 4 4 4 07: 350 350 350 350 35 0 08: 0 0 0 .
1 - 60 3-6 Test Mode / Factory Mode This machine is equipped with the test mode to check operations of various functions listed below . T o enter into the test mode, select TEST MODE in the menu items of the service data an d press th e OK button. T o enter into the F ACTOR Y MODE, press the Menu button after entering in to the TEST MODE.
1 - 61 3-6-2 T est mode menu *[1] SYSTEM TEST *[2] SCANNER [3] PRINTER *[4] MODEM *[7] SENSOR *[8] ETC [1] ROM SUM / CPU SUM [2] SD RAM [2] ADF READ [3] BOOK READ [4] SHADING TEST [6] ENDURANCE *[1] S.
1 - 62 3-6-3 Factory mode menu [1] PANEL [2] PRINTER *[3] CCD SELF CHECK *[4] SCAN *[5] FILM SCAN *[6] G3 TX [7] IRDA *[8] CR GEAR ADJUST *[9] CD-R (MANUAL) SHUKKEN *PURGE *CD-R FACTORY MODE "*" indicates that these are not used in the field.
1 - 63 3-6-4 Operation Panel Tests If you select test menu in the FACTORY mode, [1] PANE L is displayed. To select the test menu, press the OK button. In this test, check th at the display, LED lamps, and keys on the control panel are operating correctly.
1 - 64 3-6-5 PRINT TEST Select SHUKKEN of the PRINTER test fr om the F ACTOR Y MODE menu to print out the prin t pattern. The following items can be checked in the print pattern. <EEPROM inform ation contents> On the service test print (sam ple below), confir m the EEPROM information as shown below.
1 - 65 <Service test print sample> Figure 1-34 Service tes t print Check 1 N ozzle check pattern Check 3 Straight line Check 2 T op of from accur acy Check 4 Halftone.
1 - 66 3-6-6 CD-R Calibration When SPCNT board ass’y , CD-R t ray , or a unit or a part of printer (suc h as Carriage unit, Pum p unit) is replaced, perform the CD-R calibration as follo ws (re gistration of C DR sensor compen sation value data). 1.
1 - 67 3-8 V erification Items 3-8-1 EEPROM information print <How to re ad EEP ROM in format ion p rint > [Print sample] MP770 V0.2 0 IF(USB1=1 1284=0) D=004.
1 - 68 22. Auto duple x print pages (total, Phot o Paper Plus Double Side d, p ost car d) 23. Came ra Direct print pages (t otal) 24. Borderl ess print pages 25. L & 4x6 print pages 26. Number of C D-R s pri nted 27. CD-R print position adjustment 28.
1 - 69 4. Cleaning Your Machine This section de scribes the necessary cl eaning procedures fo r your machine. 4-1 CAUTION • Be sure to turn OFF the power and disconnect the power cord before cleaning the machine. • If you turn OFF the machine, all the documents stored in memory are deleted.
1 - 70 4-4. Cleaning The Interior Regularly clean the interior of the machine to avoid deterioration in print quality du e to parts being dirtied by in k o r pape r dust. Figure 1-36 Cleaning The Interior 4-5 Cleaning the paper feed roller Follow this procedure: 1.
1 - 71 4-6 Cleaning The Bottom Plate Follow this procedure: 1. Power on then connect the powe r cord. 2. Remove a ny paper from the A uto Sheet Feeder. 3. Prepare a s heet of A4 or Lette r size plain paper. Fold it in half along the l ong edge. Unfold the pape r, then load it in the paper support with the outside edg e of the fold facing down.
1 - 72 5. TRANSPOR T A TION This section describes the procedures for transpor ting the printer for returning after repair, etc. (1) Keep the print head and ink tank s in stalled in the carriage. [See NOTE (1) on the next page.] (2) Turn off the printer to securely lock the carriage in the home position.
1 - 73 Caution: (1) If the pri nt head is remove d from the prin ter and left alone by itself, ink (especial ly the pigment blac k ink) is likely to dry.
Part 2 Technical Reference.
2 - 1 1. NEW TECHNOLOGIES (1) Dye black ink adoption In addition to the pigment black ink, dye black ink is adop ted in this machine, so that special p aper can be printed i n black ink.
2 - 2 < Phenomena of predictable troubles and the Solutions (how to avoid the troubles)> 1) Although the paper size is correct (A4/L TR) and the pr int head position alignm ent pattern is printed correctly , an error of the automatic print head position alignm ent failure occurs.
2 - 3 2. CLEANING MODE AND AMOUNT OF INK PURGED To prevent p rinting problem s due to bubbles, d ust, or ink cloggi ng, print head clea ning is perform ed before the start of printing, except in the following cases: - Cleaning on arrival: Performed when the access cover is closed.
2 - 4 Condition Det ails Amount of ink used(g) Est. required time (sec) Manual cleaning (Black/Color/All at the sametime) - Via the operation panel (All at the same ti me only) - Via the printer driver (Selectable fro m Black, Color, or All at the same time) 0.
2 - 5 3. Print Mode (1) Copy INK BK :BCI-3eBK (Column: Number C :BCI-6C 5pl of Colors) M :BCI-6M 5pl Y :BCI-6Y k :BCI-6BK c :BCI-6C 2pl m :BCI-6M 2pl (”CMcm” shown in a col umn means printing in the mixture of C M5pl/cm2pl .
2 - 6 (2) Standard Color Printing (at PC Printer Driver) Defult setting Can be set at Main tab custom setting Inktank 5 color : BCI-3eBK / 6BK / 6C / 6M / 6Y 4 color *1 : BCI-3eBK / 6C / 6M / 6Y 4 color *2 : BCI-6BK / 6C / 6M / 6Y 3 color : BCI-6C / 6M / 6Y 1 color : BCI-3eBK paper t ype Drv.
2 - 7 (3) Standard Gray Scale Printing (at PC Printer Driver) Paper Type Drv.UI Fast < ―― > High Quality C u s t o m 5432 1 Plain Paper Print Quality Custom Draft Standard High Resolution(dp.
2 - 8 (5) Duplex Printing (at PC Printer Driver) Paper Ty pe Drv.UI Fast < ―― >H i g h Q u a l i t y Custom 5 4 3 2 1 Plain paper Print Quality Custom Draft Standard High Resolution(dpi) 6 0.
2 - 9 4. FAQ(Problems Specific to the MP760 and Corrective Actions) No * Function Phenomenon Condition Cause Corrective acti on Possible call or complaint 1 C Prin t results Margin (approx.
2 - 10 No * Function Phenomenon Condition Cause Corrective acti on Possible call or complaint 6 A Print results Soiling on the back side of paper (lines or streaks parallel to the paper feed direction) -After cont inuous borderless printing of small sized paper (such as 4x6), when a lar ger sized paper (su ch as A4) is rinted.
2 - 11 No * Function Phenomenon Condition Cause Corrective acti on Possible call or complaint 8 C Print resu lts Scratch es on paper -PP-101D, PP-101 , PR-101, SG-101, etc. -Paper feeding from the cassette -Multiple number of sheets loaded -Paper is scratched.
Part 3 Appendix.
3 - 2 1. PIXMA MP760 Specification <GENERAL> Printer YES Scanner YES Copy YES Facsimile NO Memory Card YES Memory Card Slot YES Media CF(Type I/II) Micro Drive Smart Media SD/miniSD* Multi Media.
3 - 3 Letter size)A4 (Photo Paper Pro, P hoto Paper Plus Glossy, Phot o Paper Plus Sem i-Gloss, or Glossy Photo Paper A4 size) Layout Pri nt Standard: Bord erl e ss, B ordere d, Index Print: 16-80 images (Depending on the size of print media) Photo Index S heet YES Power Consum ption MAX Approx.
3 - 4 (ISO JIS-SCID No.5 pat tern, Plain std m ode) Magenta (BCI-6M) appr ox . 48 0 pa ges (ISO JIS-SCID No.5 pat tern, Plain std m ode) Cyan (BCI-6C) approx. 640 pa ges (ISO JIS-SCID No.5 pat tern, Plain std m ode) Black (BCI-6BK) approx. 2,00 0 page s (ISO JIS-SCID No.
PRINTED IN JAPAN (IMPRIME AU JAPON) CANON I NC..
An important point after buying a device Canon H12-4608 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon H12-4608 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon H12-4608 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon H12-4608 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon H12-4608 will certainly help you make a decision on the purchase.
If you already are a holder of Canon H12-4608, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon H12-4608.
However, one of the most important roles played by the user manual is to help in solving problems with Canon H12-4608. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon H12-4608 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
