Instruction/ maintenance manual of the product AW820 Advent
Go to page of 24
ire/ess 900 MHZ WIRELESS STEREO SPEAKERS INSTALLATION AND OPERATING INSTRUCTIONS AW820.
900 MHz Wireless Stereo Speakers Installation and Operation Manual Model AW820 CONTENTS C.Rnect the Transmitter 5 Pewer the Speakers 7 Adiust the Transmitter 7 T.e the Speakers 8 Troubleshooting 9 S,ecifications & Features ~ 11 INTRODUCTION Thank you for your purchase of 900 MHz Wireless Speakers by Advent.
O+--+---G K L M NJ I Front BCD E F .0 o. H Bottom~ A. Tuning Indicator Light B. Tuning Control Wheel' C. Left/Monaural/Right Switch D. Power ON-OFFNolume Control Wheel E. Battery Compartment Cover F. Speaker Power Input Jack G. Mounting Bracket Bolt Hole- see (T) H.
CONNECT THE TRANSMITTER Connect the transmitter as follows: _1 Power the Transmitter 1. Insert the power cord from AC Adapter (0) into the Transmitter Power Input Jack (I). 2. Plug the AC adapter into a nearby, standard wall outlet. Note: Be sure to use the AC adapter rated 18V DC 150 rnA.
3. Plug the 3.5mm mini plug from the "V" Cable Adapter into the headphone jack (as needed, use the Headphone Adapter Plug (Q) to convert the 3.5mm plug to a 1/4" plug). Note: If you select Option 1 or Option 2 to connect the transmitter, the audio level will be fixed or variable, depending on your equipment.
Hint: On most bookshelf-type or compact stereo systems, inserting a headphone plug into the headphone jack results in automatic cutoff of the regular, or hard-wired, speakers. Hint: Most TVs, regardless of age or price, have variable outputs. If you are unsure which, if any of your outputs is fixed, refer to the TV instruction manual.
Audio Level ~ ~ ~ Output Level Frequency Control Control Wheel (K) Wheel (N) STEP 2 SET THE TRANSMITTER "LEVEL" 1. Set the Frequency Control Wheel (N) to its midpoint. 2. Turn the Output Level Control wheel (K) all the way to the right as shown.
SmlNG THE SPEAKERS FOR STEREO/MoNAURAL OPERATION For stereo operation, set the Left/Mono/Right Switch (C) to "Left" on one speaker and "Right" on the other speaker.
If you are using a Tape 2 Monitor output from your receiver/amp as the audio output, check that you have pressed the Tape MonitorlTape 2 button on the front of the receiver. This will turn on the Tape 2 outputs, which may be inactive otherwise. No Sound Check the left/right balance control on the audio source.
speCIFICATIONS & FEATURES TRANSMITIER Omnidirectional Effective Transmitting Range: Up to 300 Feet* Adjustable Audio Level Input Variable Frequency Adjustment between 912.
WARRANTY ONE YEAR LIMITED WARRANTY Recoton Corporation (the Companyl warrants to the original retail purchaser of this product that should the product or any part thereof be proven defective in material or workmanship within One Year from the date of original purchase, such defects will be replaced without charge for parts or labor.
READ THE FOLLOWING BEFORE BEGINNING INSTALLATION Thank you for purchasing an Advent Wireless product. With this purchase, you are about to experience the freedom of listening to crisp, clear, dynamic sound without wires.
900 MHZ WIRELESS STEREO SPEAKERS A W820 W ir eless INST ALLA TION AND OPERA TING INSTRUCTIONS.
Wireless Stereo Speakers Installation and Operation Manual Model A W820 CONTENTS Connect the T ransmitter .............................................................................................. 4 Power the Speakers .............................
3 R O CHARGE LEVEL FREQ. ADJUST DC 12V I K M J L N H OFF POWER/VOLUME TUNING LR MONO B C D E F A Front Back Bottom G S P Q A. T uning Indicator Light B. T uning Control Wheel C. Left/Monaural/Right Switch D. Power ON-OFF/V olume Control Wheel E. Battery Compartment Cover F .
4 CONNECT THE TRANSMITTER Connect the transmitter as follows: Step 1 Power the T ransmitter 1. Insert the power cord from T ransmitter AC Adapter (O) into the T ransmitter Power Input Jack (J). 2. Plug the T ransmitter AC Adapter (O) into any standard wall outlet.
5 W ARNING: DO NOT connect the RCA plugs of the “ Y ” Cable Adapter to a speaker output on the audio source. If you use the speaker output of an audio source to connect the transmitter , you will permanently damage the transmitter . It is designed to work with RCA-type line/variable outputs or headphone outputs only .
6 ADJUST THE TRANSMITTER Adjust the transmitter as follows. Step 1 T ur n ON your Audio Sour ce (i.e. Stereo Receiver , TV , etc.) so that you can hear sound coming from the source. Step 2 Pivot the Antenna (N) to the upright, vertical position. Step 3 Set the T ransmitter “ Level ” 1.
7 T urn On and T une the Speakers 1. Use the speaker Power ON-OFF/V olume Control Wheel (D) to turn the speaker “ ON. ” T uning Indicator Light (A) will illuminate red. 2. T urn the T uning Control Wheel (B) until the T uning Indicator Light changes color to green, indicating the speaker is tuned to the signal from the transmitter .
8 Hint: Fixed-level audio outputs from stereo receivers/amps will typically be desig- nated as T ape, T ape 1, and T ape 2 outputs, DA T (digital audio tape) outputs, VCR audio output connections, and auxiliary audio outputs.
9 Hint: Most TVs, regardless of age or price, have variable outputs. If you are unsure which, if any of your outputs is fixed, refer to the TV instruction manual. Some TVs have outputs that can switch between variable and fixed. Refer to the TV instruc- tion manual.
10 T rouble Checks and Adjustments No Sound/ • If using battery power , batteries may be low . Replace if necessary . Distortion/ Static • Check that the speaker T uning Indicator Light is illuminated green. If not, adjust the T uning Control Wheel until the light changes from red to green.
11 SPECIFICA TIONS & FEA TURES T ransmitter Omnidirectional Effective T ransmitting Range: Up to 300 feet* Adjustable Audio Level Input V ariable Frequency Adjustment between 912.
AD25981 15821-0-2 2/99 A Division of Recoton® Corp. 2950 Lake Emma Road Lake Mary , FL 32746 © 1999 Recoton Corp. MADE IN CHINA W ARRANTY ONE YEAR LIMITED W ARRANTY Recoton Corporation (the Company).
An important point after buying a device Advent Advent AW820 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Advent Advent AW820 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Advent Advent AW820 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Advent Advent AW820 you will learn all the available features of the product, as well as information on its operation. The information that you get Advent Advent AW820 will certainly help you make a decision on the purchase.
If you already are a holder of Advent Advent AW820, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Advent Advent AW820.
However, one of the most important roles played by the user manual is to help in solving problems with Advent Advent AW820. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Advent Advent AW820 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
