Instruction/ maintenance manual of the product EF-S 55-250mm f/4.0-5.6 IS STM Canon
Go to page of 14
EF-S55-250mm f/4-5.6 IS STM Instructions ENG C OP Y.
ENG-1 Thank you for purchasing a Canon product. The Canon EF-S55-250mm f/4-5.6 IS STM is a high-performance telephoto zoom lens that makes movie shooting comfortable. The lens is equipped with an Image Stabilizer and has been developed for EOS cameras compatible with EF-S lenses*.
ENG-2 Safety Precautions Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attached.
ENG-3 Safety Precautions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ENG-4 Shooting Precautions The EF-S55-250mm f/4-5.6 IS STM utilizes a stepping motor that drives the focus lens. The motor also controls the focus lens during zooming. 1. When the camera is OFF The motor does not operate while the camera is OFF or when the camera is OFF due to the use of the auto power off function.
ENG-5 For deta iled info rmat ion, refe rence pag e numb ers are provi ded in paren theses ( → **). Nomenclature Contacts ( → 6) Image stabilizer switch ( → 8) Hood mount ( → 7) Lens mount.
ENG-6 See your camera’s instructions for details on mounting and detaching the lens. After detaching the lens, place the lens with the rear end up to prevent the lens surface and contacts from getting scratched. If the contacts get soiled, scratched, or have ngerprints on them, corrosion or faulty connections can result.
ENG-7 Hood (sold separately) 4 Zooming 3 T o zoom, turn the lens’ zoom ring. Be sure to nish zooming before focusing. Zooming after focusing can affect the focus. Blurring may temporarily occur if the zoom ring is quickly rotated. Zooming when the camera is OFF will result in delayed focus.
ENG-8 Y ou can use the image stabilizer in AF or MF mode. This function provides optimal image stabilization depending on shooting conditions (such as shooting still subjects and following shots). 1 Set the ST ABILIZER switch to ON. If you are not going to use the image stabilizer function, set the switch to OFF .
ENG-9 Image Stabilizer In semi-darkened areas such as indoors or outdoors at night. In locations where ash photography is prohibited, such as art museums and theater stages. In situations where your footing is uncertain. In situations where fast shutter settings cannot be used.
ENG-10 Y ou can attach extension tube EF12 II or EF25 II for magnied shots. The shooting distance and magnication are shown below . MF mode is recommended for accurate focusing. Y ou can attach lters to the lter mounting thread on the front of the lens.
ENG-1 1 Attaching a 250D or 500D (58mm) Close-up Lens enables close-up photography . The magnication will be as follows. Close-up Lenses (Sold separately) 8 Close -up Le ns 250 D: 0.2 3x - 1.04 x Close -up Le ns 500 D: 0.1 1x - 0.66 x MF mode is recommended for accurate focusing.
ENG-12 Equiv alen t to 88- 400 mm in the 35mm lm form at. The lens lengt h is meas ured from the moun t surf ace to the fron t end of the lens. Ad d 24.2 mm when inclu ding the len s cap and dust ca p. The size and weig ht listed are for the lens onl y , excep t as indi cated.
CT1-8589-000 0713Ni © CANON INC. 2013 C OP Y.
An important point after buying a device Canon EF-S 55-250mm f/4.0-5.6 IS STM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon EF-S 55-250mm f/4.0-5.6 IS STM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon EF-S 55-250mm f/4.0-5.6 IS STM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon EF-S 55-250mm f/4.0-5.6 IS STM you will learn all the available features of the product, as well as information on its operation. The information that you get Canon EF-S 55-250mm f/4.0-5.6 IS STM will certainly help you make a decision on the purchase.
If you already are a holder of Canon EF-S 55-250mm f/4.0-5.6 IS STM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon EF-S 55-250mm f/4.0-5.6 IS STM.
However, one of the most important roles played by the user manual is to help in solving problems with Canon EF-S 55-250mm f/4.0-5.6 IS STM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon EF-S 55-250mm f/4.0-5.6 IS STM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
