Instruction/ maintenance manual of the product 802.11g 54M WLAN Canon
Go to page of 72
802.1 1g 54M WLAN Internet Broadband Router User Manual #4829610A SGZ1.
Content 1. Introduction ................................................................................................................................................ 3 1.1Featur es ...................................................................
802.1 1g 4-Port Wireless LAN Broadband Router 3 1. Introduction This 802.1 1g 54M Wireless LAN Broadband Router is an ideal solution for wireless/wired Internet surfing and office resources sharing. It provides the fas t, robust and flexible features with high transmission rate up to 54 Mbp s bandwidth in the 2.
802.1 1g 4-Port Wireless LAN Broadband Router 4 1.2 Specification Model: 802.1 1g 4-Port Wirele ss LAN Broadband Router Radio: Complies with IEEE 802.1 1b/g Frequency Band: 2.
802.1 1g 4-Port Wireless LAN Broadband Router 5 Environmental T emperature S torage -20 ° C to 60 ° C Operating 0 ° C to 45 ° C Humidity 10%~90%, non condensing Power Consumption Input : 100V , 50/60H z / 120V , 60Hz / 230V , 50Hz / 240V , 50Hz Output : DC7.
802.1 1g 4-Port Wireless LAN Broadband Router 6 2.1.1 Front Panel and LEDs Front Panel : With its Diagnostic LEDs, you could easily get status information find out where the problem is. The LEDs are explained in the following tables. 2.1.2 Rear Panel The following graphic shows the rear panel of Wireless Router .
802.1 1g 4-Port Wireless LAN Broadband Router 7 2.2 Getting St arted Please refer to the following sect ions of this manual for additi onal information about setting up a network. 2.2.1 System Requirement Before you getting started, make sure t hat you meet the follo wing requirement s.
802.1 1g 4-Port Wireless LAN Broadband Router 8 2.2.3 Setting Hardware Connection Follow the steps listed below to inst all your Router when you have all the information mentioned above. S tep 1. Power all devices down. This should include your PCs, C able or DSL modem and the Router .
802.1 1g 4-Port Wireless LAN Broadband Router 9 2.2.4 Configure your computer ． Windows 95/98/ME Step 1. TC P/IP Configuration After you have completed the hardware setup by connecting your devices, you need to configure your computer to connect to your Router .
802.1 1g 4-Port Wireless LAN Broadband Router 10 5. Locate your IP address and Subnet Mask. T ype them in the spaces provided below . 6. Click the “Gateway” tab and record the numbers listed under “Inst alled gateways.” 7. Click the “DNS Configuration” tab.
802.1 1g 4-Port Wireless LAN Broadband Router 11 Step. 2 Dis able HTTP Proxy ‧ Internet Explorer 1. Open Internet Explorer and click the stop button. Click “T ools” then “Internet Options”. 2. In the “Internet Options” window click the “Connections” tab.
802.1 1g 4-Port Wireless LAN Broadband Router 12 4. Click “OK” , and then click “OK” again to close the “Internet Options” window . ‧ Net scape 1. Open Netscape and cli ck the stop button. Click “Edit” , then click “Preferences…” 2.
802.1 1g 4-Port Wireless LAN Broadband Router 13 1. Open Internet Explorer and click the stop button. Click “T ools” then “Internet Options” . 2. In the “Internet Options” window click the “Connections” tab. Then click the “LAN Settings” button.
802.1 1g 4-Port Wireless LAN Broadband Router 14 2. Another box will appear a sking whether you want to save your TCP/IP settings. Click Save. Step. 2 Dis able HTTP Proxy ‧ Internet Explorer 1.
802.1 1g 4-Port Wireless LAN Broadband Router 15 2. Select “Proxies” and uncheck all checkboxes and click “OK” . ‧ Net scape 1. Open Netscape and cli ck the stop button. Click “Edit”, then click “Preferences…” 2. In the “Preferences” window , under “Category” double-click “Advanced” , then click “Proxies” .
802.1 1g 4-Port Wireless LAN Broadband Router 16 3. Using Configuration Menu After configuration of your network, you c an access the Router via W eb browser and type the IP Address of Router . The defaul t IP address of this Router is http://192.168.
802.1 1g 4-Port Wireless LAN Broadband Router 17 3.1 Setup Method Y ou can choose WIZARD SET UP for step-by-step Installation or choose BASIC SETUP for basic configuration or choose ADV ANC E SETUP for advanced configuration. 1. Setup Wizard If you choose WIZARD SETUP , please refer to Quick Installation Guide for step by step instruction.
802.1 1g 4-Port Wireless LAN Broadband Router 18 2. Basic Setup If you choose BASIC SETUP , you will see setup screen as below . Click the upper frame t o change settings.
802.1 1g 4-Port Wireless LAN Broadband Router 19 3.Advanced Setup If you choose ADV ANCE SETUP , you will see setup screen as below . Click the upper frame to change settings.
802.1 1g 4-Port Wireless LAN Broadband Router 20 3.2 Basic Setup 3.2.1 Setup Router In this page, you can configure your WLAN Router . Host Name: Provide a host name (also called system name or account name) if your ISP requires this information. Domain Name: Provide the ISP domain name (e.
802.1 1g 4-Port Wireless LAN Broadband Router 21 LAN IP Address: These fields show the LAN IP Address and the Subnet Mask as seen by others on your Local Area Network (LAN). Most us ers will not need to change these values. If you change the LAN IP Address with the DHC P server running, you'll need to restart your client machines.
802.1 1g 4-Port Wireless LAN Broadband Router 22 Click Apply when you finish choosing your settings, or click Cancel to undo your change s. 3.2.2 Global Address Use the Global Address screen for Network Addr ess T ranslation (NA T), a process that provides internal to external IP addre ss mapping.
802.1 1g 4-Port Wireless LAN Broadband Router 23 3.2.3 Wireless Use this screen to configure your gateway for wireless access. Note that the Wireless settings are divided into Wireless Radio , Wireless Security and Wireless Status . Radio Setting: Use this screen to configure your Gateway for wireless access .
802.1 1g 4-Port Wireless LAN Broadband Router 24 Mode: Select the Wireless Mode your router support. It support three modes: 802.1 1B, 802.1 1G , and MIXED which supports both 8 02.
802.1 1g 4-Port Wireless LAN Broadband Router 25 parameter specifies the fragment p acket size. DTIM Interval: Number of beacon intervals between success ive Delivery T raffic Indication Map s (DTIMs). Preamble Type: Shows the length of preamble, either Short (72 bits) or Long (144 bit s).
802.1 1g 4-Port Wireless LAN Broadband Router 26 This is regard to the security for wirele ss access, please select one of the security mode. The default value is No Encryption Wireless Access Control: If you enable Wireless Access Control, then click Set Access List to launch the Wireless Control List window.
802.1 1g 4-Port Wireless LAN Broadband Router 27 3.2.4 T ools: Change Password: Change the administrative password for your WLAN Router . Backup Settings: Backup the current settings to your local disk Restore Factory Default s: Restore the factory default settings.
802.1 1g 4-Port Wireless LAN Broadband Router 28 3.2.5 St atus: This page is a read-only display that gi ves you the information about the gateway ..
802.1 1g 4-Port Wireless LAN Broadband Router 29 3.2.6 DHCP: Use the DHCP screen to set up your gatew ay as a Dynamic Host Configuration Protocol (DHCP) server. DHCP servers automat ically assign IP addresses to all the clients on your network. DHCP Server If you choose to enable DHCP, make sure ther e is not already a DHCP server on your network.
802.1 1g 4-Port Wireless LAN Broadband Router 30 For example, if you choose 10.10.10.51 as the starting address and 10.10.10.100 as the ending address, the DHCP server will assign addresses to network clien ts that are between 10.10.10.51 and 10.10.10.
802.1 1g 4-Port Wireless LAN Broadband Router 31 3.2.8 St atistics: On this page displays st atistics data for LAN , W AN and AP ports..
802.1 1g 4-Port Wireless LAN Broadband Router 32 3.2.9 Printer: This page allows you to configure the setting of the Printer Server to share the printing service for LAN users. Print Server: Y ou may choose to Enable or Disable the Print Server . Device Name: The name of the print server hardware used for identific ation purposes.
802.1 1g 4-Port Wireless LAN Broadband Router 33 Printer: This field shows the Manufacturer , VID(V endor ID), Model, PID(Product ID), S tatus of current Printer , which connected to the device's USB port. Command Set: This field shows you Command Set of the pr inter .
802.1 1g 4-Port Wireless LAN Broadband Router 34 3.2.9.1. Use LPD network pr int in wi ndow2000/window XP 3.2.9.1.1 Host setup: Add New Printer ’s driver (from the printer m anufacture); If it was a.
802.1 1g 4-Port Wireless LAN Broadband Router 35 2.the add printer wizard screen will appear , select my computer; 3.in available port, select LPT1;.
802.1 1g 4-Port Wireless LAN Broadband Router 36 4.Select the appropriate printer manufactory; 5.Select printer type;.
802.1 1g 4-Port Wireless LAN Broadband Router 37 6.T ype printer name or use default;.
802.1 1g 4-Port Wireless LAN Broadband Router 38 7.In printer sharing, click next; 8.In printing testing page, select “no”;.
802.1 1g 4-Port Wireless LAN Broadband Router 39 9.Done;.
802.1 1g 4-Port Wireless LAN Broadband Router 40 Configure Port properties: 1.Select printer that you want to confi gure( setting by step 1 at local printer); 2.
802.1 1g 4-Port Wireless LAN Broadband Router 41 3.Select “port”;.
802.1 1g 4-Port Wireless LAN Broadband Router 42 4.Select “add port”; 5.In available ports, select “S tandard TCP/IP port”, done;.
802.1 1g 4-Port Wireless LAN Broadband Router 43 6.Select “add port”; 7.Enter network print server “IP Address” and name new port or default; 8.
802.1 1g 4-Port Wireless LAN Broadband Router 44 9.Select “properties”, and modify port setting;.
802.1 1g 4-Port Wireless LAN Broadband Router 45 10.Enter you network print queue name and set port is LPR 1 1.Done;.
802.1 1g 4-Port Wireless LAN Broadband Router 46 3.2.9.1.3 LPD Server setup Use Web Page setting LPD server; 1.Enable the Print server 2.Enter the Device Name The setting of Device Name must be the same as the Queue Name in host; e.g, T est, here 3.Finish.
802.1 1g 4-Port Wireless LAN Broadband Router 47 3.2.9.2 Use LPD network pr int in window98/window ME 3.2.9.2.1Inst allation S tep 1. Double click the setup.
802.1 1g 4-Port Wireless LAN Broadband Router 48 S tep 2. In the following step, click the “Next”. S tep 3. If you accept the licens e agreement, click “Y es”.
802.1 1g 4-Port Wireless LAN Broadband Router 49 S tep 4. Then click “Next” , af ter copying file, the following window will be displayed. S tep 5. Clic k “Finish” , and select “Y es ”, I want to restart my computer now” to complete the installation.
802.1 1g 4-Port Wireless LAN Broadband Router 50.
802.1 1g 4-Port Wireless LAN Broadband Router 51 3.2.9.2.2 Configuration Installing the driver of y our printer connected to the Printer Server gateway . S tep 1. Go to “Printers” by clicking the S tart button, selecting Settings, and clicking Printers.
802.1 1g 4-Port Wireless LAN Broadband Router 52 S tep 3: Select the “Local printer” and click the “next”. S tep 4: Select the Manufacturer and insert corresponding printer driver disk and click “Inst all from disk… S tep 5: install printer the driver file S tep 6: Select the compatible printer , and click “Next”.
802.1 1g 4-Port Wireless LAN Broadband Router 53 S tep 8: Clic k “Finish” S tep 9: Clic k “OK” to complete the installation. 3.2.9.2.3 Printer Server Port configuration S tep 1: Right click on the printer you just added, and clic k the “Properties”.
802.1 1g 4-Port Wireless LAN Broadband Router 54 S tep 4: Select the “Others…” option from the “Adding port” window , choose the “LPR port” item in list, then click “OK” .
802.1 1g 4-Port Wireless LAN Broadband Router 55 S tep 5: Y ou can choose a favorite name fo r this port, but the IP address of the printer server (gateway) and the printer nam e must match the conf iguration on your gateway . S tep 6: Then the port you added is shown in the port list.
802.1 1g 4-Port Wireless LAN Broadband Router 56 3.3 Advanced Setup 3.3.1 V i rtual Servers This provides remote services from com puters in your network by virtual servers.
802.1 1g 4-Port Wireless LAN Broadband Router 57 3.3.2 Filters Use this screen to create and apply filters th at can selectively allow traf fic to pass in and out of your network.
802.1 1g 4-Port Wireless LAN Broadband Router 58 3.3.3 IP/URL Block Use the IP/URL Block screen to create and apply f ilters to selectively block traffic from specific IP addresses or specific domain name from passing in and out of your network.
802.1 1g 4-Port Wireless LAN Broadband Router 59 3.3.4 Special App s(Special Applications) Use the S pecial Apps screen to allow cert ain ports to communicate with computers outside your network. This feature may be nec essary for multi-session applications like online gaming and video conferencing.
802.1 1g 4-Port Wireless LAN Broadband Router 60 3.3.5 DMZ Host Use the DMZ Host screen to expose one or more computers on yo ur network to the internet. This feature is of ten used for on line games that require unrestricted two-way communication. Note that the computer you designate won't hav e any firewall protection.
802.1 1g 4-Port Wireless LAN Broadband Router 61 3.3.6 MAC Clone If your ISP restricts service to PCs only , us e the Mac Clone feature to copy a PC Media Access Control (MAC) address to your Gateway . This p r ocedure will caus e the gateway to appear as a single PC, while allowing online access to multiple computers on your network.
802.1 1g 4-Port Wireless LAN Broadband Router 62 3.3.8 Proxy DNS Use the Proxy DNS screen to map a domain name to its server IP address. This feature acts as a DNS server for the in ternal and DMZ networ ks, allowing you to connect to local machines without using an external DNS server .
802.1 1g 4-Port Wireless LAN Broadband Router 63 3.3.9 Routing Use the Routing screen to configure the routing features. It includes static routing and dynamic routing.
802.1 1g 4-Port Wireless LAN Broadband Router 64 3.3.10 SNMP Use the SNMP screen to edit the Agent informa tion, configure the trap receiver's IP address and Community Names for the SNMP feature. Using SNMP, you can control and monitor the network in a simple way.
802.1 1g 4-Port Wireless LAN Broadband Router 65 4. Glossary Ad-Hoc Mode An Ad-hoc integrated wireless LAN is a gr oup of computers, each has a Wireless LAN adapter , Connected as an independent wir eless LAN. Ad hoc wir eless LAN is applicable at a department al scale for a br anch or SOHO operation.
802.1 1g 4-Port Wireless LAN Broadband Router 66 software or a special piece of hardware built specifically to act as a firewall. In most circumstances, a firewall is used to prevent unauthorized Internet users from accessing private networks or cor porate LAN’ s and Intranets.
802.1 1g 4-Port Wireless LAN Broadband Router 67 configuration. Infrastructure is applicable to enterprise scale for wireless access to central database, or wireless applicati on for mobile workers.
802.1 1g 4-Port Wireless LAN Broadband Router 68 Shared Key It’ s when both the sender and recipient share a se cret key . Both units use this key for an extended length of time, someti mes indefinitely . Any eavesdropp er that discovers the key may decipher all packet s until the key is changed.
802.1 1g 4-Port Wireless LAN Broadband Router 69 used to secure data during transmission..
802.1 1g 4-Port Wireless LAN Broadband Router 70 5. TCP/IP Port List for Internet Service The list of TCP/IP Port for Internet service is as following table. Please note that the list is just for your reference. Y ou may check the service provider ’s manual to see more details.
802.1 1g 4-Port Wireless LAN Broadband Router 71 Palm Computing Network Hotsync 14237 14238 Data synchronization pcAnywhere 5631 5632 Remote control POP3 1 10 Post Office Protocol V ersion 3 QuickT im.
802.1 1g 4-Port Wireless LAN Broadband Router 72 FCC S tatement This equipment generates uses a nd can radiate radio frequency ener gy and, if not installed and used in accordance with the instructi ons in this manual, may cause in terference to radio communications.
An important point after buying a device Canon 802.11g 54M WLAN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon 802.11g 54M WLAN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon 802.11g 54M WLAN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon 802.11g 54M WLAN you will learn all the available features of the product, as well as information on its operation. The information that you get Canon 802.11g 54M WLAN will certainly help you make a decision on the purchase.
If you already are a holder of Canon 802.11g 54M WLAN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon 802.11g 54M WLAN.
However, one of the most important roles played by the user manual is to help in solving problems with Canon 802.11g 54M WLAN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon 802.11g 54M WLAN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
