Instruction/ maintenance manual of the product 500D Canon
Go to page of 228
E INSTRUCTION MANUAL E INSTRUCTION MANUAL.
2 Thank you for purchasing a Canon product. The EOS REBEL T1i/EOS 500D is a high-performance, digital single- lens reflex camera featuring fi ne-detail CMOS sensor with 15.10 effective megapixels, DIGIC 4, high- precision and high-speed 9-point AF , approx.
3 Before starting, check that all t he following items have been included with your camera. If anything is missing, contact your dealer . * Battery Charger LC-E5 or LC-E5E is provided. (The LC-E5E comes with a power cord.) If you purchased a Lens Kit, chec k that the lens is included.
4 Icons in this Manual < 6 > : Indicates the Main Dial. < V > < U > : Indicate the < S > cross keys. < 0 > : Indicates the setting button. 0 , 9 , 7 , 8 : Indicates that the respective function remains active for 4 sec., 6 sec.
5 For first-time users, chapters 1 and 2 explain the camera’ s basic operations and shooting procedures. Chapters Introduction Camera basics. 2 Getting St arted 23 Basic Shooting and Image Playback Fully automatic shooting for different subject s. 43 Advanced Shooting T echniques Shooting features for spec ific types of subjects.
6 1 2 Introduction Item Check List ....................... ........................................................................... 3 Conventions Used in this Manual ............................................... ....................... 4 Chapters .
7 Contents 4 3 Advanced Shooting Techniques 57 d : Program AE ............................................... .................................................58 Z : Changing the ISO Speed .... ................................................... .....
Contents 8 8 5 6 7 Live View Shooting 105 A Live View Shooting. ......................................... ........................................ 106 A Setting Shooting Functi ons .................................................. ...................
9 Contents 10 9 11 Slide Show (Auto Playback) ...........................................................................154 Viewing the Images on TV ......................................... .................................... 156 K Protecting Images .
10 Contents at a Glance Shooting Shoot automatically Î p.43 - 55 (Basic Zone modes) Shoot continuously Î p.47 , 50 , 68 ( i Continuous shooting) T ake a picture of myself in a group Î p.69 ( j Self-timer) Freeze the action Blur the action Î p.76 ( s Shutter-priority AE) Blur the background Keep the background in sharp focus Î p.
11 Make a large size print of the picture Î p.70 ( 73 , 83 , 1 ) T ake many pictures Î p.70 ( 76 , 86 ) Focusing Change the point of focus Î p.66 ( S AF point selection) Shoot a moving subject Î p.50 , 65 (AI Servo AF) Playback View the images with the camera Î p.
12 Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and ca nnot be used underwater . If you accidentally drop the camera into wa ter , promptly consult your nearest Canon Service Center .
13 Handling Precautions LCD Monitor Although the LCD monito r is manufactured with very high precision technology with over 99.9 9% effective pixels, there might be a few dead pixels among the remaini ng 0.01% or less pixels. Dead pixels displaying only black or red, etc.
14 Quick Start Guide 1 Insert the battery . (p.26) T o charge the battery , see page 24. 2 Atta ch the lens. (p.33) When attaching an EF-S lens, align it with the white index on the camera. For other lenses, align it with the red index. 3 Set the lens focus mode switch to <AF>.
15 Quick Start Guide 6 Set the Mode Dial to < 1 > (Full Auto). (p.44) All the necessary camera settings will be set automatically . 7 Focus the subject. (p.37) Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway , and the camera will focus the subject.
16 The names in bold indicate the parts explained up until the “Basic Shooting and Image Playback” section. Nomenclature Mode Dial (p.20) Power switch (p.27) < Z > ISO speed setting button (p.60) < 6 > Main Dial (p.4) Shutter button (p.
17 Nomenclature Eyecup (p.195) Viewfinder eyepiece Display-off sensor (p.138) < B > Shooting settings display button (p.42,135) < M > Menu button (p.38) < A / l > Live View shooting/ Movie shooting/Print/Share button (p.106/122/165,178) LCD monitor (p.
Nomenclature 18 Shooting Settings Display The display will show only th e settings currently applied. Aperture Shots remaining Self-timer countdown Bulb exposure time ISO speed (p.
19 Nomenclature Viewfinder Information The display will show only th e settings currently applied. Aperture AF point display indicator < > AF points < Z > ISO speed < o > Focus confirmation light Max.
Nomenclature 20 Mode Dial The Mode Dial has the Basic Z one modes, Creative Zone modes, and Movie shooting mode. Basic Zone All you do is press the shutter button. Fully-automatic shooting suitable for the subject. 1 : Full Auto (p.44) C : Creative Auto (p.
21 Nomenclature EF-S18-55mm f/3.5-5.6 IS lens EF-S18-200mm f/3.5-5.6 IS lens Focus mode switch (p.33) Lens mount index (p.33) Contacts (p.13) Hood mount (p.217) 58 mm filter thread (front of lens) Focusing ring (p.67,1 18) Zoom ring (p.34) Zoom position index (p.
Nomenclature 22 Battery Charger LC-E5 Charger for Battery Pack LP-E5 (p.24). Battery Charger LC-E5E Charger for Battery Pack LP-E5 (p.24). Battery pack slot Charge lamp Power plug This power unit is intended to be corre ctly orientated in a vertical or floor mount position.
23 Getting Started This chapter explains preparatory step s before you start shooting and basic camera operations. Attaching the S trap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration.
24 1 Remove the protective cover . 2 Atta ch the battery . As shown in the illustration, attach the battery securely . T o detach the battery , follow the above procedure in reverse. 3 Recharge the battery . For LC-E5 As shown by the arrow , flip out the battery charger ’ s prongs and insert the prongs into a power outlet.
25 Charging the Battery Recharge the battery on the day before or on the day it is to be used. Even during non-use or storage, a charged battery will gradually discharge and lose its power . After recharging the battery , de tach it and unplug the charger from the power outlet.
26 Load a fully charged Battery Pa ck LP-E5 into the camera. 1 Open the battery compartment cover . Slide the lever as shown by the arrow and open the cover . 2 Insert the battery . Insert the end with the battery contact s. Insert the battery until it locks in place.
27 When you turn on the power switch and the date/time setting screen appears, see page 29 to set the date/time . < 1 > : The camera turns on. < 2 > : The camera is turned off and does not operate. Set to this position when not using the camera.
Turning on the Power 28 When the power switch is set to < 1 >, the battery level will be indicated in one of four levels: z : Battery level is OK. x : Battery level is slightly down, but adequate power remains. c : Battery will be exhausted soon.
29 When you turn on the power for the first time or if the date/time has been reset, the Date/T ime setting screen will appear . Follow steps 3 and 4 to set the date/time. Note that the date/time appended to recorded images will be based on this Date/Time setting.
30 1 Display the menu. Press the < M > button to display the menu. 2 Under the [ 6 ] t ab, select [Language ]. Press the < U > key to select the [ 6 ] tab. Press the < V > key to select [ Language ] (the third item from the top), then press < 0 >.
31 The captured image is recorded onto the card (sold separately). Make sure the card’ s write protect switch is set upward to enable writing/erasing.
Installing and Removing the SD Card 32 1 Open the cover . Set the power switch to < 2 >. Check that “Recording...” is not displayed on the LCD monitor . Make sure the access lamp is off, then open the cover . 2 Remove the card. Gently push in the card, then let go.
33 1 Remove the caps . Remove the rear lens cap and the body cap by turning them as shown by the arrow . 2 Atta ch the lens. Align the EF-S lens with the camera’s white EF-S lens mount index and turn the lens as shown by the arrow until it clicks in place.
Attaching and Detaching a Lens 34 T o zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. T urning the zoom ring after achieving focus may throw off the focus slightly . While pressing the lens release button, turn the lens as shown by the arrow .
35 When you use the IS lens’ built-in Image S tabilizer , camera shake is corrected to obtain a less blurred s hot. The procedure explained here is based on the EF-S18-55mm f/3.5-5 .6 IS lens as an example. * IS stands for Image S tabilizer . 1 Set the IS switch to < 1 >.
36 T urn the dioptric adjustment knob. T urn the knob left or right so that the nine AF points in the viewfinder look sharp. T o obtain sharp images, hold the ca mera still to minimize camera shake. 1. Wrap your right hand around the camera grip firmly .
37 Basic Operation The shutter button has two steps. Y ou can press the shutter button halfway . Then you can further press the shutter button completely . Pressing halfway This activates autofocusing and automatic exposure metering that sets the shutter speed and aperture.
38 Y ou can set various functions with t he menus such as the image-recording quality , date/time, etc. While look ing at the LCD monitor , use the < M > button, < S > cross keys, and < 0 > button on the camera back.
39 3 Menu Operations 1 Display the menu. Press the < M > button to display the menu. 2 Select a t ab. Press the < U > key to select a tab. Y ou can also turn the < 6 > dial to select a tab. 3 Select the desired item. Press the < V > key to select the item, then press < 0 >.
40 If the card is new or was previous ly formatted by another camera or computer , format the card with the camera. When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.
41 3 Formatting the Card The card is new . The card was formatted by a diff erent camera or a computer . The card is full with images or data. A card-related error is displayed (p.209). Execute [Format] in the following cases: About Low-level Formatting Do low-level forma tting if the card’s record ing or reading speed seems slow .
42 The LCD monitor can display the shooti ng settings screen, menu screen, image, etc. Displayed when the camera is turned on. When your eye near s the viewfinder eyepiece, the display-off sensor (p.17, 138) turns off the LCD monitor automatically . This prevents the bright LCD monitor from interfering with your view .
43 Basic Shooting and Image Playback This chapter explains how to use the Basic Zone modes on the Mode Dial for best re sults and how to playback images. With the Basic Zone modes , all you do is point and shoot and the camera sets everything automatically (p.
44 1 Set the Mode Dial to < 1 >. 2 Aim any AF point over the subject. All the AF points will be used to focus, and generally the closest object will be focused. Aiming the center AF point over the subject will make focusing easier . 3 Focus the subject.
45 1 Fully Automatic Shooting The focus confirmation light < o > blinks and focus is not achieved. Aim the AF point over an area ha ving good contrast, then press the shutter button halfway (p.192). If you are too close to the subject, move away and try again.
46 Depending on the scene, position the subj ect toward the left or right to create a balanced background and good perspective. In the < 1 > (Full Auto) mode, while you press the shutter button halfway to focus a still subject, t he focus will be locked.
47 The < 2 > (Portrait) mode blurs the background to make the human subject stand out. It also makes flesh tones and the hair look softer than with the < 1 > (Full Auto) mode. The farther the distance between the subject and background, the better .
48 Use the < 3 > (Landscape) mode for wide sce nery , night scenes, or to have everything in focus from near to far . The greens and blues also become more vivid and sharper than with < 1 > (Full Auto). With a zoom lens, use the wide-angle end.
49 When you want to photograph flowers or small things up close, use the < 4 > (Close-up) mode. T o make small things appear much larger , use a macro lens (sold separately). Use a simple background. A simple background makes the flower , etc., stand out better .
50 T o photograph a moving subject, wh ether it is a child running or a moving vehicle, use the < 5 > (S ports) mode. Use a telephoto lens. Using a telephoto lens is recomm ended so you can shoot from afar . Use the center AF point to focus. Aim the center AF point over th e subject, then press the shutter button halfway to auto focus.
51 T o shoot someone at night and obtain a natural-looking exposure in the background, use the < 6 > (Night Portrait) mode. Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view . Also, use a tripod to prevent camera shake.
52 In places where flash photograp hy is prohibited, use the < 7 > (Flash Off) mode. This mode is also ef fe ctive for candlelight scenes when you want to capture the ambient light. If the numeric display in the vi ewfinder blinks, take care to prevent camera shake.
53 Basic Zone modes except < C > (Creative Auto) take care of everything, whereas the < C > Creative Auto mode enables you to easily change the picture’s brightness, depth of field, color tone (Picture S tyle), etc. The default settings are the same as the < 1 > (Full Auto) mode.
C Creative Auto Shooting 54 (1) Flash firing < a > (Auto firing), < D > (Flash on), or < b > (Flash off) can be selected. If you set < b > (Flash off), see “Disabling Flash” on p age 52. (2) Blurring/sharpening the background If you move the index mark toward the left, the background will look more blurred.
55 C Creative Auto Shooting (4) Image effects Besides the standard image effect, you can set it for portrait s, landscapes, or black-and-white photos. (p.73: Picture S tyle) < P > (S tandard): S tandard image ef fect applicable to most scenes. < Q > (Smooth skin tones): Effective for close-up s of women or children.
56 The easiest way to playback images is explained below . For more details on the playback procedure, see page 147. 1 Playback the image. When you press the < x > button, the last captured image will be displayed. 2 Select the image. T o view images starting with the last image, press the < Y > key .
57 Advanced Shooting Techniques In the Basic Zone modes, to prevent spoiled shots, most functions are set au tomatically and cannot be changed. In the < d > (Program AE) mode, you can set various functions and be more creative.
58 T o obtain a good exposure of the s ubject, the camera set s the exposure (shutter speed and aperture) automatic ally . This is called Program AE. 1 Set the Mode Dial to < d >. 2 Focus the subject. Look through the viewfinder and aim the selected AF point over the subject.
59 d : Program AE Changing the ISO speed and using the built-in flash. T o match the subject and ambient li ghting level, you can change the ISO speed (p.60) or use the bu ilt-in flash (p.62). In the < d > mode, the built-in flash will not fire auto matically .
60 Set the ISO speed (image sensor ’ s sensitiv ity to light) to suit the ambient light level. In the Basic Zone modes, the IS O speed is set automatically (p.61). 1 Press the < Z > button. ( 9 ) X [ ISO speed ] will appear . 2 Select the ISO speed.
61 Z : Changing the ISO Speed N If the ISO speed is set to “ AUTO ”, the actual ISO speed to be set will be displayed when you press the shutter button halfway . As indicated below , the ISO speed will be set automatically to suit the shooting mode.
62 In indoors, low light, or backlit c onditions in daylight, just pop up the built-in flash and press the shutter button to take flash pictures. In the < d > mode, the shutter speed (1/60 se c. - 1/200 sec.) will be set automatically to prevent camera shake.
63 D Using the Built-in Flash If the subject is far away , increase the ISO speed. By increasing the ISO speed, you can extend the flash range. In bright light, decrease the ISO speed. If the exposure setting in the viewfi nder blinks, decrease the ISO speed.
64 Select the AF mode suiting the shooti ng conditions or subject. In the Basic Zone modes, the optimum AF mode is set automatically . 1 On the lens, set the focus mode switch to <AF>. 2 Press the < Z E > button. X [ AF mode ] will appear .
65 E : Changing the AF Mode N This AF mode is for moving subjects when the focusing dist ance keeps changing. While you hold do wn the shutter button halfway , the subject will be focused continuously . The exposure is set at the moment the picture is taken.
66 In the Basic Zone modes, all the AF points are active. Generally , the AF point covering the closest subject will be selected to focus. Therefore, the camera sometimes may not focus the subject you want. With the < d > (Program AE), < s >, < f >, and < a > modes, you can select one AF point to focus where you want.
67 S Selecting the AF Point N When shooting a portrait up close, use One-Shot AF and focus the eyes. If you focus the eyes first, you c an then recompose and the face will remain sharp. If it is difficult to focus, se lect and use the center AF point.
68 Y ou can shoot up to about 3.4 shots per sec. This is effective for shooting your child running toward you and capturing the different facial expressions. 1 Press the < Y i Q > button. 2 Select < i >. Press the < U > key to select < i >, then press < 0 >.
69 1 Press the < Y i Q > button. 2 Select the self-timer . Press the < U > key to select the desired self-timer , then press < 0 >. Q : 10-sec. self-timer The remote control can also be used. (p.194) l : 2-sec. self-timer N (p.104) q : 10-sec.
70 Y ou can select the number of megapixels to record (approx. 15.1, 8.0, or 3.7 megapixels) and the image quality . 1 Select [Quality]. Under the [ 1 ] tab, select [ Quality ], then press < 0 >. X [ Quality ] will appear . 2 Select the image-recording quality .
71 3 Setting the Image-recording Quality I want to select the quality matchi ng the paper size for printing. Refer to the diagram on the left when choosing the image-recording quality . If you want to crop the image, selecting a higher quality (more pixels) such as 73 , 83 , 1 , or 1 + 73 is recommended.
3 Setting the Image-recording Quality 72 1 is the raw image data before it is made into a 73 or other images. Although 1 images require software like Digital Photo Professional (provided) so they can be displayed on the computer , they also offer flexibility for image adjustments possible only with 1 .
73 By selecting a Picture S tyle, you can obtain image effects matching your photographic expre ssion or the subject. 1 Press the < X A > button. X [ Picture Style ] will appear . 2 Select a Picture Style. Press the < U > key to select a Picture S tyle, then press < 0 >.
A Selecting a Picture Style N 74 S Neutral This Picture S tyle is for users wh o prefer to process images with their computer . For natural colors and subdued images. U Faithful This Picture S tyle is for users wh o prefer to process images with their computer .
75 More Advanced Techniques This chapter builds on the previous chapter and introduces more ways to shoot creatively . The first half of this chapter explains how to use the < s > < f > < a > < 8 > modes on the Mode Dial.
76 Y ou can either freeze the action or create motion blur with the < s > (Shutter-priority AE) mode on the Mode Dial. * < s > stands for T ime value. 1 Set the Mode Dial to < s >. 2 Set the desired shutter speed. See “Shooting T ips” for advice on setting the shutter speed.
77 s : Action Shots T o freeze the action or moving subject. Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. T o blur a running child or animal giving the impression of fast movement. Use a medium shutter speed such as 1/250 sec. to 1/30 sec.
78 T o obtain a blurry background or to make everything near and far look sharp, set the Mode Dial to < f > (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * < f > stands for Aperture valu e which is the size of th e diaphragm hole inside the lens.
79 f : Changing the Depth of Field When using a high aperture, note that camera shake can occur in low light scenes. A higher aperture will make the shutter speed slower . Under low light, the shutter speed can be as long as 30 sec. In such cases, increase the ISO speed and hold the camera steady or use a tripod.
f : Changing the Depth of Field 80 T o obtain a correct flash expos ure, the flash output will be set automatically to match the set a perture (autoflash exposure). The shutter speed will be set automatically between 1/200 sec. - 30 sec. to suit the scene’s brightness.
81 Y ou can set both the shutter speed and aper ture as desired. With flash, the flash exposure will be set automatically to match the aperture that was set. The flash sync speed can be set within 1/200 sec. to 1/30 sec. or to bulb. * < a > stands for Manual.
82 Objects in the foreground and backgro und will be in focus automatically . All the AF points will function to detect the subject, and the aperture required to attain the necessary depth of field will be set automatically . * < 8 > stands for Auto-Depth of field.
83 The metering mode determines the exposure. Different metering modes measure the subject brightness differently . Normally , evaluative metering is recommended. 1 Select the [Metering mode]. Under the [ 2 ] tab, select [ Metering mode ], then press < 0 >.
84 Exposure compensation is used to alte r the standard exposure set by the camera. Y ou can make the image look brighter (increased exposure) or darker (decreased exposure). The exposure compensation setting will not be automatically canceled when you turn off the camera.
85 Setting Exposure Compensation N Set flash exposure compensation if the flash exposure of the subject does not come out as desire d. 1 Select [Flash control]. Under the [ 1 ] tab, select [ Flash control ], then press < 0 >. 2 Select [ Built-in flash func.
86 This feature takes exposure compensat ion a step further by varying the exposure automatically with three s hots as shown below . Y ou can then choose the best exposure. This is ca lled AEB (Auto Exposure Bracketing). 1 Select [Expo. comp./AEB]. Under the [ 2 ] tab, select [ Expo.
87 3 Auto Exposure Bracketing N Follow steps 1 and 2 to turn off the AEB amount display . The AEB setting will be canceled automa tically if the power switch is set to < 2 >, flash recycling is complete, etc. Using AEB with continuous shooting. If < i > continuous shooting (p.
88 Y ou can customize a Picture S tyle by adjusting individual parameters like [ Sharpness ] and [ Contrast ]. T o see the resulting effect s, take test shots. T o customize [ Monochrome ], see page 90. 1 Select [Picture Style]. Under the [ 2 ] tab, select [ Picture Styl e ], then press < 0 >.
89 A Customizing a Picture Style N Sharpness Adjusts the sharpness of the image. T o make it less sharp, set it toward the E end. The closer it is to E , the softer the image will look. T o make it sharper , set it toward the F end. The closer it is to F , the sharper the image will look.
A Customizing a Picture Style N 90 For Monochrome, you can also set [ Filter effect ] and [ T oning effect ] in addition to [ Sharpness ] and [ Contrast ] explained on the preceding pag e. k Filter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more.
91 Y ou can select a base Picture S tyle such as [ Portrait ] or [ Landscape ], adjust its p arameters as des ired and register it under [ User Def. 1 ], [ User Def. 2 ], or [ User Def. 3 ]. Y ou can create Picture S tyles whos e parameter settings such as for sharpness and contrast are diff erent.
A Registering a Picture Style N 92 5 Select a pa rameter . Select a parameter such as [ Sharpness ], then press < 0 >. 6 Set the p arameter . Press the < U > key to adjust the parameter as desired, then press < 0 >. For details, see “Customizing a Picture S tyle” on pages 88-90.
93 The color space refers to the range of reproducible colors. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In the Basic Zone modes, sRGB is set automatically . 1 Select [Color space].
94 Use AE lock when the ar ea of focus is to be di fferent from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the < A > button to lock the exposure, then recompose and take the shot. This is called AE lock.
95 FE lock locks the flash exposure setting over the desired area of the subject. This feature can also be used with a Canon EX-series S peedlite. * FE stands for Flash Exposure. 1 Press the < D > button to pop up the built-in flash. Press the shutter button halfway and look in the viewfinder to check that the < D > icon is lit.
96 White balance (WB) is for making the white areas look white. Normally , the < Q > (Auto) setting will obtain the co rrect white balance. If natural- looking colors cannot be obtained with < Q >, you can select the white balance settings for different source s or set it manually by shooting a white object.
97 B : Setting the White Balance N 2 Select [Custom WB]. Under the [ 2 ] tab, select [ Custom WB ], then press < 0 >. X The custom white balance selection screen will appear . 3 Import the white balance dat a. Select the image that was captured in step 1, then press < 0 >.
98 Y ou can correct the white balance th at has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter . Each color can be corrected to one of nine levels.
99 2 White Balance Correction N With just one shot, three images having a different color tone can be recorded simultaneously . Based on the color temper ature of the current white balance setting, the image will be bracketed wi th a blue/amber bias or magenta/green bias.
100 Due to the lens characteristics, the f our corners of the picture might look darker . This is called lens light fall- off or drop in peripheral illumination. This can be corrected. For JPEG images, lens light fall-off is corrected when the image is captured.
101 3 Lens Peripheral Illumination Correction The camera already contains lens peripheral illumination correction data for about 25 lenses. In step 2, if you select [ Enable ], the peripheral light correction will be applied automatically for any lens whose correction data has been registered in the camera.
102 The shooting settings are displayed on the LCD monitor where you can directly select and set the functions. This is called the Quick Control screen. 1 Display the Quick Control screen. When the shooting settings are displayed, press < 0 >. X The Quick Control screen will appear ( 7 ).
103 0 Using the Quick Control Screen On the Quick Control screen, select the function and press < 0 >. The respective setting screen will then appear (except for the shutter speed and aperture). T urn the < 6 > dial to change the setting. Y ou can also press the < U > key to change the setting.
104 The camera’s mechanical shake caused by the reflex mirror action can affect images t aken with a super telephoto lens or close-up (macro) lens. In such cases, mi rror lockup is effective. Mirror lockup is enabled by selecting the [ 7 Custom Functions (C.
105 Live View Shooting Y ou can shoot while viewing th e picture on the camera’s LCD monitor . This is called “Live View shooting.” Live View shooting is effective for still subject s which do not move. If you handhold the camera and shoot while viewing the LCD monitor , camera shake can cause blurred images.
106 1 Set the shooting mode. Set the shooting mode to a Creative Zone mode. Live View shooting cannot be used in Basic Zone modes. 2 Display the Live View image. Press the < A > button. X The Live View image will appear on the LCD monitor . The Live View image will closely reflect the brightness level of the actual image you capture.
107 A Live View Shooting N Under [ 6 Live View function settings ], set [ Live View shoot. ] to [ Enable ]. Battery Life with Live View Shooting [Approx. number of shot s] The figures above are based on a fully- charged Battery Pack LP-E5 and CIP A (Camera & Imaging Products As sociation) testing standards.
108 Function settings particular to Li ve Vi ew shooting are explained here. Under the [ 6 ] tab, the [ Live View function settings ] menu options, [ Grid display ], [ Metering timer ], and [ AF mode ] are as described below . Grid display With [ Grid 1 l ] or [ Grid 2 m ], you can display grid lines.
109 A Setting Shooting Functions N 2 Select the function and set it. Press the < S > key to select the function to be set. X The name of the selected function is displayed at the bottom.
110 A Setting Shooting Functions N Each time you press the < B > button, the information display will change. About the Information Display Magnifying frame ISO speed Shots remaining Exposure le.
111 The AF modes available are [ Live mode ], [ u Live mode ] (face detection, p.1 12), and [ Quick mode ] (p.1 16). If you want to achieve precise focusi ng, set the lens focus mode switch to < MF >, magnify the image, an d focus manually (p.1 18).
112 Using AF to Focus N 3 Focus the subject. Aim the AF point over the subject, and hold down the < A > button. X When focus is achieved, the AF point will turn green a nd the beeper will sound. X If focus is not achieved, the AF point will turn red.
113 Using AF to Focus N 2 Focus the subject. Press the < A > button to focus the face covered by the < p > frame. X When focus is achiev ed, the AF point will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn red.
114 Using AF to Focus N AF operation Focusing will take slightly longer . Even when focus has been achieved, pressing the < A > button will focus again.
115 Using AF to Focus N Shooting conditions which can make focusing difficult: Low-contrast subjects such as the blue sky and solid-color , flat surfaces. Subjects in low light. S tripes and other patterns where there is contrast only in the horizontal direction.
116 Using AF to Focus N The dedicated AF sensor is used to focus in the One-Shot AF mode (p.64), using the same AF me thod as with viewfinder shooting. Although you can focus th e target area quickly , the Live View image will be interrupted momentarily during the AF operation .
117 Using AF to Focus N 3 Focus the subject. Aim the AF point over the subject, and hold down the < A > button. X The Live View image will turn of f, the reflex mirror will go back down, and AF will be executed. X When focus is achieved, the beeper will sound and the Live View image will reappear .
118 Y ou can magnify the image and focus precisely manually . 1 Set the lens focus mode switch to <MF>. T urn the lens focusing ring to focus roughly . 2 Move the magnifying frame. Press the < S > key to move the magnifying frame to the position where you want to focus.
119 Notes About the Live View Image Under low or bright light conditions, the Live View image might not reflect the brightness of the captured image. If the light source within the image changes, the screen might flicker . If this happens, stop and resume the Live View shooting under the actual light source to be used.
120 Notes About the Shooting Results When you shoot continuous ly with the Live View function for a long period, the camera’s internal temp erature may increase and it can degrade image quality . T erminate Live View shooting when not shooting images.
121 Shooting Movies Set the Mode Dial to < k > to shoot movies. The movie file format will be MOV . SD Cards for Movie Shooting When shooting movies, use a card with an SD speed Class 6 “ ” or higher . If you use a ca rd with a slower SD speed Class, the movie shooting an d playback might not work properly .
122 Connecting the camera to a TV set is recommended to playback movies (p.156-157). 1 Set the Mode Dial to < k >. X The reflex mirror will make a sound, then the image will appear on the LCD monitor . 2 Focus the subject. Before shooting a movie, autofocus or manual focus (p.
123 Function settings particular to movie shooting are explained here. Display the movie menu. Select the [ k ] menu tab. The menu options displayed are explained below . Movie-recording size [ 1920x1080 ] : Full HD (Full High-Definition) recording quality .
Movie Settings 124 Grid display With [ Grid 1 l ] or [ Grid 2 m ], you can display grid lines. Metering timer Y ou can change how long the AE lock is to be maintained with the < Z > button. Sound recording When the sound recording is set to [ On ], monaural sound will be recorded with the built-in microphone.
125 Movie Settings Y ou can take a still photo at anytime by pressing the shutter button completely , even during movie shooting. T aking Still Photos During Movie Shooting The still photo will record the entire screen including the semi- transparent mask.
Movie Settings 126 Each time you press the < B > button, the information display will change. About the Information Display Magnifying frame AE lock ISO speed Shots remaining Exposure compensati.
127 Notes on Movie Shooting Recording and Image Quality At [ 1920x1080 ], the recorded frame rate is slower , so fast-moving subjects or scenes ma y look a little jerky . If a single movie’s file size reaches 4 GB , the movie shooting will stop automatically .
128 Notes on Movie Shooting Camera’s internal temperature increase and image degradation If you continue to shoot movies fo r a prolonged period, the camera’s internal temperature will increase. This can degr ade the image quality . While not shooting, turn off the power .
129 Handy Features Silencing the Beeper (p.130) Card Reminder (p.130) Setting the Image Review T ime (p.130) Setting the Auto Power-off T ime (p.131) Adjusting the LCD Moni tor Brightness (p.131) File Numbering Methods (p.132) Auto Rotate of V ertical Images (p.
130 Y ou can prevent the beeper from sounding when focus is achieved or during self-timer operation. Under the [ 1 ] tab, select [ Beep ], then press < 0 >. Select [ Off ], then press < 0 >. This prevents shooting if there is no card in the camera.
131 Handy Features T o save battery power , the camera tu rns off automatically after the set time of idle operation elapses. Y ou can set this auto power-off time.
Handy Features 132 The file number is like the frame num ber on a roll of film. The captured images are assigned a sequential f ile number from 0001 to 9999 and saved in one folder . Y ou can change how the file number is assigned. The file number will appear on a computer in this format: IMG_0001.
133 Handy Features [Auto reset]: Resets the file numbering to 0001 whenever the card is replaced. Each time you replace the card, the file numbering rest arts from 0001.
Handy Features 134 V ertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and computer instead of horizontally . The setting of this feature can be changed. Under the [ 5 ] tab, select [ Auto rot ate ], then press < 0 >.
135 Handy Features While the menu is displayed, press the < B > button to display the camera’s current settings. While the menu is displayed, press the < B > button to display the settings. Press the < B > button again to return to the menu.
Handy Features 136 This is for reverting all the camera’s shooting settings an d Custom Functions to the default settings. This works in the < d > and other Creative Zone modes. 1 Select [Clear settings]. Under the [ 7 ] tab, select [ Clear settings ], then press < 0 >.
137 Handy Features If you use EOS Utility (provided so ftware) to set your copyright information, the copyright informati on will be added to the image’s Exif information. With the camera, the copyright information can only be viewed or deleted. If your copyrigh t information has not been set, it will be grayed out on the screen and unusable.
Handy Features 138 This prevents the display-of f sens or from turning off the shooting settings display automatically w hen your eye nears the viewfinder eyepiece. Select [LCD auto off]. Under the [ 5 ] tab, select [ LCD auto off ], then press < 0 >.
139 The built-in flash and external S peedlite settings can be set with the menu. The [ External flash *** ] menu options for exte rnal S peedlites will be applicable only to an attached EX-series Speedlite comp atible with the respective functions . The setting procedure is the same as setting a camera menu function.
3 Setting the Flash N 140 [Built-in flash func. setting] and [External flash func. setting] Settable Functions * Regarding the [ FEB ] (Flash exposure bracketing), [ Zoom ], and [ Wireless set. ], refer to the S p eedlite’ s instruction manual. Flash mode With an external S peedlite, you can select the flash mode to suit your flash shooting.
141 3 Setting the Flash N Flash exposure compensation See “ y Flash Exposure Compensation” on page 85. E-TTL II For normal flash exposures, set it to [ Evaluative ]. If [ A verage ] is set, the flash exposure wi ll be averaged for the entire metered scene as with an external metering flash.
142 Whenever you set the power switch to < 1 > or < 2 >, the Self Cleaning Sensor Unit operates to aut omatically shake off the dust on the front of the sensor . Normally , you need not pay attention to this operation. However , you can execute the sensor cleaning at anytime as well as disable it.
143 Normally , the Self Cleaning Sensor Un it will eliminate most of the dust that might be visible on captured im ages. However , in case visible dust still remains, you can append the Dust Delete Data to the image to later erase the dust spots.
3 Appending Dust Delete Data N 144 3 Photograph a solid-white object. At a distance of 20 cm - 30 cm / 0.7 ft. - 1.0 ft., fill the viewfinder with a patternless, solid-white object and take a picture. X The picture will be taken in the aperture- priority AE mode with an aperture of f/22.
145 Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower , etc. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly , having it done by a Canon Service Center is recommended.
3 Manual Sensor Cleaning N 146 While cleaning the sensor , n ever do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor might get damaged. • Setting the power switch to < 2 >. • Opening the battery compartment cover .
147 Image Playback This chapter explains features related to viewing photos and movies, going into more detail than in Chapter 2 “Basic Shooting and Image Playback” which explained the playback procedure. Here you will learn how to playback and erase photos an d movies with the camera and viewing them on a TV set.
148 Search for images quickly with the index display showing four or nine images on one screen. 1 Playback the image. When you press the < x > button, the last captured image will be displayed. 2 T urn on the index display . Press the < I > button.
149 x Searching for Images Quickly With the single image display , you can turn the < 6 > dial to jump through the images. 1 Select the jump method. In the [ 4 Image jump w/ 6 ] menu, select the desired jump method from [ 1 image/10 images/100 images/ Date/Movies/Stills ], then press < 0 >.
150 Y ou can magnify the image by 1. 5x to 10x on the LCD monitor . 1 Magnify the image. During image playback, press the < u > button. X The image will be magnified. T o increase the magnification, hold down the < u > button. The image will continue to be magnified until it reaches the maximum magnification.
151 Y ou can rotate the displayed image to the desired orientation. 1 Select [Rotate]. Under the [ 3 ] tab, select [ Rot ate ], then press < 0 >. 2 Select the image. Press the < U > key to select the image to be rotated. Y ou can also select an image on the index display .
152 1 Playback the image. Press the < x > button to display the image. 2 Select a movie. Press the < U > key to select the image. During the single-image display , the < 1s > icon displayed on the upper left indicates that it is a movie.
153 k Playing Movies Function Playback Description 2 Exit Returns to the si ngle-image display . 7 Play Pressing < 0 > toggles between play and pause. 8 Slow motion Adjust the slow motion speed by pressing the < U > key . The slow-motion speed is in dicated on the upper right.
154 Y ou can playback the images in the card as an automatic slide show . 1 Select [Slide show]. Under the [ 4 ] tab, select [ Slide show ], then press < 0 >. 2 Select the images to be played back. Press the < V > key to select the top menu item, then press < 0 >.
155 3 Slide Show (Auto Playback) 3 Set the play time and repeat option. Press the < V > key to select [ Set up ], then press < 0 >. For still photos, set the [ Play time ] and [ Repeat ] options, then press the < M > button. 4 St art the slide show.
156 Y ou can also view the still photos and movies on a TV set. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. * Adjust the movie’s sound volume with the TV set. * Depending on the TV se t, part of the image di splayed might be cut off.
157 Viewing the Images on TV The HDMI Cable HTC-100 (sold separately) is required. 1 Connect the HDMI cable to the camera. Connect the HDMI cable to the camera’s < D > terminal. With the plug’s < d HDMI MINI > logo facing the front of the camera, insert it into the < D > terminal.
158 Protecting the image prevents it from being erased accidentally . 1 Select [Protect images]. Under the [ 3 ] tab, select [ Protect images ], then press < 0 >. X The protect setting screen will appear . 2 Select the image and protect it. Press the < U > key to select the image to be protected, then press < 0 >.
159 Y ou can either select and erase images one by one or erase them in one batch. Protected images (p.158) will not be erased. Once an image is erased, it canno t be recovered. Make sure you no longer need the image before erasing it. T o prevent import ant images from being erased accide ntally , protect it.
L Erasing Images 160 2 Select [Select and erase images]. Select [ Select and erase images ], then press < 0 >. X An image will appear . Press the < I > button to display the three-image view . T o return to the single-image display , press the < u > button.
161 When you press the < B > button during single-image playback, you can switch the shooting information display . The most detailed shooting information is shown below . About the Highlight Alert When the shooting information is displayed, any overexposed areas of the image will blink.
B Shooting Information Display 162 About the Histogram The brightness histogram display shows the exposure level distribution and overall brightness. The RGB histogram display is for checking the color saturation an d gradation. The display can be switched with the [ 4 Histogram ] menu.
163 Printing Images and Transferring Images to a Computer Printing (p.164) Y ou can connect the camera directly to a printer and print out the images in the card. The camera is compatible with “ w PictBridge” which is the standard for direct printing.
164 The direct printing procedure is done entirely with the camera while you look at the LCD monitor . 1 Set the camera’ s power switch to < 2 >. 2 Set up the printer . For details, see the printer’s instruction manual. 3 Connect the camera to the printer .
165 Preparing to Print 6 Playback the image. Press the < x > button. X The image will appear , and the < w > icon will appear on the upper left to indicate that the camera is connected to a printer . X The < l > button lamp will light in blue.
166 The screen display and setting options will differ depending on the printer . Some settings might not be available. For details, see the printer ’ s instruction manual. 1 Select the image to be printed. Check that the < w > icon is displayed on the upper left of the LCD monitor .
167 w Printing Select the size of the paper loaded in the printer , then press < 0 >. X The paper type screen will appear . Select the type of the paper loaded in the printer , then press < 0 >. When using a Canon printer and Canon paper , read the printer ’ s instruction manual to check what pape r types can be used.
w Printing 168 4 Set the printing effects. Set as necessary . If you need not set any printing effects, go to step 5. The screen display may differ depending on the printer . Select the option on the upper right, then press < 0 >. Select the desired printing effect, then press < 0 >.
169 w Printing 5 Set the date and file number imprinting. Set as necessary . Select < I >, then press < 0 >. Set as desired, then press < 0 >. 6 Set the number of copies. Set as necessary . Select < R >, then press < 0 >.
w Printing 170 In step 4 on page 168, select the printing effect. When the < e > icon is displayed next to < z >, press the < B > button. Y ou can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4.
171 w Printing Y ou can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again. 1 On the print setting screen, select [T rimming].
w Printing 172 Depending on the printer , the trimmed image area might not be printed as you specified. The smaller you make the trimming fr ame, the grainier the picture will look on the print. While trimming the image, look at th e camera’s LCD monitor .
173 Y ou can set the print type, date impr inting, and file No. imprinting. The print settings will be applied to al l print-ordered images. (They cannot be set individually for each image.) 1 Select [Print order]. X Under the [ 3 ] tab, select [ Print order ], then press < 0 >.
W Digital Print Order Format (DPOF) 174 4 Exit the setting. Press the < 7 > button. X The print order screen will reappear . Next, select [ Sel.Image ] or [ All image ] to order the images to be printed. Print type K S tandard Prints one image on one sheet.
175 W Digital Print Order Format (DPOF) Sel.Image Select and order images one by one. Press the < I > button to display the three-image view . T o return to the single- image display , press the < u > button. After completing the print order , press the < M > button to save the print order to the card.
176 With a PictBridge printer , you can easily print images with DPOF . 1 Prep aring to print. See page 164. Follow the “Connecting the Camera to a Printer” procedure up to step 5. 2 Under the [ 3 ] t ab, select [Print order]. 3 Select [Print]. [ Print ] will be displayed only if the camera is connected to the printer and printing is possible.
177 By connecting the camera to a comp uter , you can transfer images from the camera’s card by operating the camera. This is called direct image transfer . Before connecting the camera to a computer , be sure to install the provided software (EOS DIGIT AL Solution Disk on CD- ROM) in the computer .
d Transferring Images to a Computer 178 4 Set the camera’ s power switch to < 1 >. When the program selection dialog window appears on the computer , select [ EOS Utility ]. X The [ EOS Utility ] window will appear on the computer , and the direct image transfer screen will appear on the camera’s LCD monitor .
179 d Transferring Images to a Computer Options other than [ All images ] are explained below . T o start the image transfer , press the < l > button. New images Images which have not yet been trans ferred to the computer will be selected by the camera automatically and transferred.
d Transferring Images to a Computer 180 Under the [ 3 ] tab, you can use [ T ransfer order ] to select the images to be transferred to a computer . When you select [ T ransfer order images ] on page 179, you can transfer the images set by the transfer order .
181 Customizing the Camera Y ou can customize various came ra features to suit your picture-taking preferences. Y o u can do it with Custom Functions. Custom Functions can be set and used only in Creative Zone modes.
182 1 Select [Custom Functions (C.Fn)]. Under the [ 7 ] tab, select [ Custom Functions (C.Fn) ], then press < 0 >. 2 Select the Custom Function number . Press the < U > key to select the Custom Function No., then press < 0 >. 3 Change the setting as desired.
183 3 Setting Custom Functions N Custom Functions C.Fn I: Exposure A LV shooting k Movie shooting 1 Exposure level increments p.184 k 2 ISO expansion k 3 Flash sync. speed in Av mode k C.Fn II: Image 4 Long exposure noise reduction p.185 k 5 High ISO speed noise reduction k 6 Highlight tone priority p.
184 Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Auto fo cus/Drive, C.Fn IV : Operation/Others.
185 3 Custom Function Settings N C.Fn II: Image C.Fn-4 Long exposure noise reduction 0: Off 1: Auto For 1 sec. or longer exposure s, noise reduction is performed automatically if noise typical of lo ng exposures is detected. This [ Auto ] setting is effective in most cases.
3 Custom Function Settings N 186 C.Fn-6 Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highli ghts. The gradation between the grays and highlights becomes smoother .
187 3 Custom Function Settings N C.Fn III: Autofocus/Drive C.Fn-8 AF-assist beam firing The AF-assist beam can be emitted by th e camera’s built-in flash or by the external, EOS-dedicated S peedlite. 0: Enable 1: Disable The AF-assist beam is not emitted.
3 Custom Function Settings N 188 C.Fn IV: Operation/Others C.Fn-10 Shutter/AE lock button 0: AF/AE lock 1: AE lock/AF Convenient when you want to focus and meter separately . Press the < A > button to autofocus and press the shutte r button halfway to perform AE lock.
189 3 Custom Function Settings N C.Fn-12 LCD display when power ON 0: Display When the power switch is turned on, the shooting settings will be displayed (p.
190 Under the My Menu tab, you can regi ster up to six menu options and Custom Functions whose settings you change frequently . 1 Select [My Menu settings]. Under the [ 9 ] tab, select [ My Menu settings ], then press < 0 >. 2 Select [Register].
191 Reference This chapter provides refere nce information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to look up needed information.
192 Autofocus can fail to achieve focus (the focus confirmation light < o > blinks) with certain subjects such as the following: Subjects difficult to focus Low-contrast subjects (Example: Blue sky , solid-color walls, etc.) Subjects in low light Extremely backlit or reflective subjects (Example: Car with a reflective body , etc.
193 With AC Adapter Kit ACK-E5 (sol d separately), you can connect the camera to a household power outle t and not worry about the battery level. 1 Connect the power cord. Connect the power cord as shown in the illustration. After using the camera, unplug the power plug from the power outlet.
194 Remote controllers to shoot wirele ssly up to about 5 meters/16.4 feet from the camera. The RC-1 can trip the shutter immediately or after a 2- sec. delay , and the RC-5 trips the shutter after a 2-sec. delay . Set the drive mode to < Q > (p.
195 Remote Control Shooting If you take a picture without looking at the viewfinder , light entering the eyepiece can throw off the exposure. T o prevent this, use the eyepiece cover (p.23) attached to the camera strap. During Live View shooting and movie shooting, att aching the eyepiece cover is unnecessary .
196 Basically operates like a built-in flash for easy operation. When an EX-series S peedlite (sold separately) is attached to the camera, almost all the autoflash cont rol is done by the camera. In other words, it is like a high-output flash attached externally in place of the built-in flash.
197 External Speedlites With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL autoflash mode, the flash can be fired at full output only . Set the camera’s shooting mode to < a > (manual exposure) or < f > (aperture-priority AE) and adjust the aperture setting before shooting.
198 o : Set automatically k : User selectable : Not select able Function Availability Table k k k o o o o k o o o o k k k o o o o k o o o o k k k o o o o k o o o o k k k o o o o k o o o o k k k o o o .
199 Function Availability Table o : Set automatically k : User selectable : Not select able *1: Refers to “(2) Blurring/sharpenin g the background” fu nction on page 54. *2: Refers to “(3) Adjusting the picture brightness” function on page 54.
200 1 Shooting 1 (Red) Page 2 Shooting 2 (Red) 3 Playback 1 (Blue) Menu Settings Quality 73 / 83 / 74 / 84 / 76 / 86 / 1 + 73 / 1 70 Beep On / Off 130 Release shutter without card Enable / Disable 130 Review time Off / 2 sec.
201 Menu Settings 4 Playback 2 (Blue) Page 5 Set-up 1 (Y ellow) 6 Set-up 2 (Y ellow) 7 Set-up 3 (Y ellow) 9 My Menu (Green) Histogram Brightness / RGB 162 Slide show Select the images, set th e Play t.
Menu Settings 202 k Movie (Red) Page Movie Shooting Mode Menu Grid display Off / Grid 1 l / Grid 2 m 124 Metering timer 4 sec. / 16 sec. / 30 sec. / 1 min.
203 If a problem occurs, first refer to this T roubleshooting Guide. If this T roubleshooting Guide do es not resolve the problem, contact your dealer or nearest Canon Service Center . Do not recharge any battery pack other than genuine Canon Battery Pack LP-E5.
Troubleshooting Guide 204 Auto power off is in ef fect. If y ou do not want auto power off to take effect, set [ 5 Auto power off ] to [ Off ]. Even if [ 5 Auto power off ] has been set to [ Off ], the LCD monitor will still turn off af ter the camera is idle for 30 min.
205 Troubleshooting Guide Set the [ 7 Custom Functions (C.Fn) ] menu’s [ High ISO speed noise reduction ] to [ Stand ard ], [ Low ], or [ Disable ]. If it is set to [ Str ong ], the maximum burst during co ntinuous shooting will decrease (p.185). If you shoot a subject which has fine deta il (field of grass, etc.
Troubleshooting Guide 206 The built-in flash’s pop-up mechanism moves slightly . This is normal. If you use flash or if ISO 3200 or hi gher is set, the shutter will make two sounds each time you shoot (p.107). If the card’s writing speed is slow , movie shooting may stop automatically .
207 Troubleshooting Guide If dust is adhering to the LCD monitor , wipe its surface with a lens cloth or soft cloth. In low or high temperatures, the LCD monitor display may seem slow or might look black. It will retu rn to normal at room temperature.
Troubleshooting Guide 208 The correct date and time has not been set (p.29). Make sure the A V cable or HDMI ca ble’s plug is connected all the way in (p.156, 157). Set the video OUT format (NTSC/P AL) to the same video format as the TV (p.201). Use the A V cable that came with the camera (p.
209 If there is a problem with the camera, an error message will appear . Follow the on- screen instructions. * If the error still persists, write down the error No. and cont act your nearest Canon Service Center . Error Codes No. Error Message & Solution 01 Communications between the camera and lens is faulty .
210 System Map Eyecup Ef Rubber Frame Ef Eyepiece Extender EP-EX15 ll E-series Dioptric Adjustment Lenses Angle Finder C Semi Hard Case EH19-L Wide Strap EW-100DB lll Battery Pack LP-E5 Battery Grip B.
211 System Map EF-S lenses EF lenses Remote Switch RS-60E3 Remote Controller RC-5 Remote Controller RC-1 Windows Vista Windows XP Mac OS X PictBridge-compatible printer Computer TV/Video PC card slot .
212 •T y p e Ty p e : Digital, single-lens reflex, AF/AE camera with built-in flash Recording media: SD memory card, SDHC memory card Image sensor size : 22.3 x 14.9 mm Compatible lenses: Canon EF le nses (including EF-S lenses) (35mm-equivalent focal length is approx.
213 Specifications Magnification: Approx. 0.87x (-1 m -1 with 50mm lens at infinity) Eye point: Approx. 19 mm (From eyep iece lens cent er at -1 m -1 ) Built-in dioptric adjustment: -3.
Specifications 214 • Flash Built-in flash: Retractable, auto pop-up flash Guide No.: 13/43 (ISO 100, in meters/feet) Flash coverage: 17mm lens angle of view Recycling time approx.
215 Specifications • LCD Monitor T ype: TFT color liquid-crystal moni tor (Brightness adjust able to 7 levels) Monitor size and dots: 3-in. wi th approx.
Specifications 216 Battery life: With viewfinder shooting: (Based on CIP A Approx. 400 shots at 23°C/73°F , approx. 380 shots at 0°C/32°F testing standards) With Live View shooting: Approx. 170 shots at 23°C/73°F , approx. 160 shots at 0°C/32°F • Dimensions and Weight Dimensions (W x H x D): 128.
217 Specifications • EF-S18-55mm f/3.5-5.6 IS Angle of view: Diagonal extent: 74°20’ - 27°50’ Horizontal extent: 64°30’ - 23°20’ V ertical extent: 45°30’ - 15°40’ Lens construction: 1 1 elements in 9 groups Minimum aperture: f/22 - 36 Closest focusing distance: 0.
218 T rademarks Adobe is a trademark of Ad obe Systems Incorporated. Windows is a trademark or registered trademark of Mi crosoft Corporation in the United S tates and other countries. Macintosh and Mac OS is a trademark or registered trademark of Apple Inc.
219 Safety Warnings Follow these safe guards and use the eq uipment properly to pr event injury , death, and material damage. Preventing Serious Injury or Death • T o prevent fire, excessive heat, c.
220 • If you drop the equipment and the casing br eaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock.
221 Digital Camera Model DS126231 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 ) This device may not ca use harmful interference, and (2) this device mu st accept any interference received, including interference that may ca use undesired operation.
222 IMPORT ANT SAFETY INSTRUCTIONS 1. SA VE THESE INSTRUCTIONS — This manual contai ns important safety and operating instructions for Battery Charger LC-E5 & LC-E5E. 2. Before using the charger, read all in structions and cautionary remarks on (1) the charger , (2) the ba ttery pack, and (3) the pro duct using the battery pack.
223 1st-curtain sync .... .........................140 2nd-curtain sync... ......................... 140 2-sec. self-timer .................... .......... 69 4- or 9-image inde x display ...........148 A A/V OUT terminal ..........................156 AC Adapter Kit .
224 Index Depth-of-field pr eview ..................... 80 Digital terminal ....... ............... 164, 177 Dioptric adjustme nt ......................... 36 Direct printing → Printing DPOF ......................... ................... 173 Drive mode .
225 Index Highlight detail lo ss .......................161 Highlight tone priority .............. 60, 186 Histogram (Brightness/RGB) ........ 162 I ICC profile ............ ................. .......... 93 Image Auto playback .. ......................
226 Index Microphone ............ ....................... 124 Mirror lockup .......... ............... 104, 187 Mode Dial.......... ................. ............. 20 Monochrome .......... ......................... 74 Movie Playback ................ .
227 Index Remote control shooting .................... 5 5, 69, 124, 194 Revert to default settings .............. 136 Rotate (image) ..... ................. 134, 151 S Safety warnings ... ......................... 219 Saturation............. ........
This Instruction Manual booklet is current as of April 2009. For information on the camera’s compatibility with any accessories and lenses introduced after this date, contact any Canon Service Center . CT1-1030-001 © CANON INC. 2009 PRINTED IN JAP AN CANON INC.
An important point after buying a device Canon 500D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon 500D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon 500D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon 500D you will learn all the available features of the product, as well as information on its operation. The information that you get Canon 500D will certainly help you make a decision on the purchase.
If you already are a holder of Canon 500D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon 500D.
However, one of the most important roles played by the user manual is to help in solving problems with Canon 500D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon 500D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
