Instruction/ maintenance manual of the product 2297B002 Canon
Go to page of 17
EF200mm f/2L IS USM Instruction ENG C OP Y.
ENG-1 Dedicated to EOS cameras, the EF200mm f/2L IS USM is a high-performance telephoto lens equipped with an Image Stabilizer . • "IS" stands for Image Stabiliz er . • "USM" stands for Ultr asonic Motor. Features 1. The Image Stabilizer giv es the equivalent effect of a shutter speed fiv e stops f aster*.
ENG-2 a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision.
ENG-3 Nomenc lature Orientation locking knob ( → 14) Lens mount index ( → 4) Distance scale ( → 6) Drop-in filter ( → 12) Strap mount ( → 4) Contacts ( → 4) Focus mode switch ( → 5) Focu.
ENG-4 • After detaching the lens, place the lens with the rear end up to prev ent the lens surface and electrical contacts from getting scratched. • If the contacts get soiled, scratched, or hav e fingerpr ints on them, corrosion or faulty connections can result.
ENG-5 After autofocusing in ONE SHO T AF mode, f ocus manually by pressing the shutter b utton halfway and turning the focusing ring. (Full-time manual f ocus) Y ou can set the focusing distance range to 1.9 m/6.2 ft. to infinity or 3.5 m/11.5 ft. to infinity .
ENG-6 4. Infinity Compensation Mark Infinity compensation mark Distance index To compensate f or shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mar k is aligned with the distance indicator on the distance scale.
ENG-7 During autofocus operation, y ou can press the AF stop button to temporarily pause autof ocus. If the shutter button is still pressed halfw ay when the AF stop button is released, autof ocusing will continue as bef ore.
ENG-8 By presetting any f ocusing distance, you can instantly focus at that point e v en while you are shooting a different subject. This function operates in both the AF and MF modes. How to Focus at the Preset Distance While turning the playback ring to the left or r ight, press the shutter button completely .
ENG-9 9. Image Stabilizer Settings Y ou can use the image stabilizer in AF or MF mode. Select the stabilizer mode. • MODE 1: Corrects vibrations in all directions.
ENG-10 10. Tips on Using the Image Stabilizer ● MODE 1 ● MODE 2 The image stabilizer in this lens is eff ective f or hand-held shots under the follo wing conditions. • In semi-darkened areas such as indoors or outdoors at night. • In locations where flash photograph y is prohibited, such as ar t museums and theater stages.
ENG-11 Tips on Using the Image Stabilizer • The Image Stabilizer cannot compensate f or a b lurred shot caused b y a subject that moved. • Set the ST ABILIZER switch to when you are taking pictures using the Bulb setting (long e xposures). If the ST ABILIZER switch is set to , the image stabilizer function ma y introduce errors.
ENG-12 11. Dr op-In Filters The lens comes with the drop-in Gelatin Filter Holder 52 holding a glass filter . The holder accepts commercially-av ailable gelatin filters. 14mm 14mm 47mm 47mm Removing and Installing To remo ve the drop-in filter , press in the left and r ight lock b uttons and pull the filter holder straight up out of the slot.
ENG-13 12. Extenders (Sold separately) • First attach the Extender to the lens, then attach the lens to the camera. Detach it from the camera in the re verse order . If you attach the lens to the camera first, misoperation may occur . • Only one Extender can be attached to the lens and camera.
ENG-14 Camera-to-Subject Magnification Distance (mm) Near F ar Near F ar EF12 II 1380 3397 0.19 × 0.06 × EF25 II 1092 1716 0.26 × 0.14 × 15. Case Belt Ke yhole Lever Lid Y ou can attach Extension T ube EF12 II or EF25 II for magnified shots . The shooting distance and magnification are shown below .
ENG-15 Specifications • The lens length is measured from the mount surface to the front end of the lens. Add 26.5 mm when including the lens cap and dust cap. • The size and weight listed are f or the lens only , except as indicated. • Closeup Lenses 250D/500D cannot be attached.
© CANON INC. 2008 CT1-7580-003 2009.7 C OP Y.
An important point after buying a device Canon 2297B002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Canon 2297B002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Canon 2297B002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Canon 2297B002 you will learn all the available features of the product, as well as information on its operation. The information that you get Canon 2297B002 will certainly help you make a decision on the purchase.
If you already are a holder of Canon 2297B002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Canon 2297B002.
However, one of the most important roles played by the user manual is to help in solving problems with Canon 2297B002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Canon 2297B002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
