Instruction/ maintenance manual of the product Cooker Hood BHC110 Cannon
Go to page of 12
1 The Art of Cooking Instructions for Installation and Use Cooker hood BHC90 BHC110 To the Installer Before installation fill in the product details on the back cover this book.
2.
3 Contents Installation, 4-5 Assembly Technical information, 6 Electrical connection Power cable Technical data Description, 7 Filtering version Ducting version Operation, 8 Controls Maintenance, 9 Cl.
4 5 ) Once adjusted, finally fix the hood with a further 6 screws (D) : Mark the 6 holes to be drilled on the wall, unhook the hood and drill the holes marked (8 mm diameter); then use the screw anchors and the screws provided for final fixing.
5 d) Make the electrical connection of the hood by means of the power cable ( refer to the paragraph “Electrical connection” ). e) Lower the lower flue resting it on the hood. f) Check if the charcoal filter (P) has been installed. If not yet installed, proceed by sliding the 2 filter clips into their seats and turn the filter upwards.
6 Electrical connection ! Arrange the electrical power supply within the decorative flue dimensions. ! When making the electrical connections, check that the voltage values correspond to those indicated on the data plate inside the appliance itself.
7 The hood may be in the filtering or ducting version. Decide from the outset which type is to be installed. For better efficiency, we recommend installing the hood in the ducting version (if possible).
8 Operation Controls Speed increase button Repeatedly pressing the button will increase the motor speed until reaching the maximum speed. Boost speed button Activates the motor at boost speed for 10 minutes, after which the motor goes back to running at the speed set previously.
9 Replacing the charcoal filter If using the hood in the filtering version, the charcoal filter (P) will periodically have to be replaced. First of all, turn the panel and remove the metal grease filters. Push the catch towards the inside and remove the charcoal filter from its seat.
10 Precautions and tips General safety ! The distance between the supporting surface for the cooking vessels on the hob and the lower part of the hood must be at least 65 cm. If the instructions for installation for the hob specify a greater distance, this has to be taken into account.
11.
12 Key Contacts After Sales Service Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and services we offer. Repair Service and Information Desk UK: 08709 066 066 (Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays) www.
An important point after buying a device Cannon Cooker Hood BHC110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cannon Cooker Hood BHC110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cannon Cooker Hood BHC110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cannon Cooker Hood BHC110 you will learn all the available features of the product, as well as information on its operation. The information that you get Cannon Cooker Hood BHC110 will certainly help you make a decision on the purchase.
If you already are a holder of Cannon Cooker Hood BHC110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cannon Cooker Hood BHC110.
However, one of the most important roles played by the user manual is to help in solving problems with Cannon Cooker Hood BHC110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cannon Cooker Hood BHC110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
