Instruction/ maintenance manual of the product CDI 2012E10-S Candy
Go to page of 17
User instructions EN CDI 2012 DISHWASHER.
3 CONTENTS Safety advice Setting up, installation Wa ter softener unit Adjusting the upper basket Loading the dishes Information for test laboratories Half load washing Loading the detergent and rinse.
Fuses and plugs This appliance should be used only on a socket with a minimum rating of 13 Amp. Our ready-fitted plug is already equipped with a 13 amp fuse which is BS 1362 AST A approved. Any replacement should be exactly the same. If the fuse cover is lost, do not use the plug until it is replaced.
7 Connecting the outlet hose ■ The outlet hose should disharge into a standpipe, making sure that there are no kinks (fig. 4) . ■ The standpipe must be at least 40 cm above floor level and it must have an internal diameter of at least 4 cm. ■ It is advisable to fit an anti-odour air trap (fig.
Loading the salt ■ On the bottom of the machine there is a container for the salt for regenerating the softener . ■ It is important to use only a salt that is specifically designed for dishwasher .
11 LOADING DISHES Using the upper basket ■ The upper basket is provided with mobi- le racks hooked to the sides of the basket which can be regulated in two positions: upright and lowered. In the lowered position the racks may be used for tea and coffee cups, kitchen knives and ladles.
Lower basket (fig. 6) M = 8 + 4 soup plates N = 1 1 + 1 dinner plates O = 12 dessert plates P = serving dish Q = cutlery 13 Upper basket (fig. 5) A = 5 + 5 + 2 glasses B = 12 saucers C = 4 + 4 + 4 cup.
LOADING THE DETERGENT AND THE RINSE AID Filling the detergent container IMPORT ANT It is essential to use a detergent that is specifically designed for dishwashers either in powder , liquid or tablet form. “FINISH” gives very good results and can be easily obtained.
17 1 2 3 CLEANING THE FIL TERS The filter system (fig.A “4”) consists of: a central container that traps the larger particles; a flat gauze that continuously filters the wash water; a micro filter , located beneath the gauze, that traps the tiniest particles ensuring a perfect rinse.
19 WHEN CYCLE IS FINISHED After every wash it is essential to turn off water supply and to switch off the machine by pressing the On/Off button to the of f position. If the machine is not going to be used for some time, it is advisable to follow these rules: 1.
20 EN 50242 place load Capacity with pans and dishes Wa ter supply pressure Fuse Power input Supply voltage 12 8 persons Min. 0,08 - Max 0,8 MPa (see rating plate) (see rating plate) (see rating plate.
22 ■ Close the door to allow the water to be discharged. The running program will be cancelled and the LED for the “recommended” program or the LED for the program that was used at least 3 times consecutively will start to blink.
25 24 5 • • • • •• • • •• • • • •• 50°C 32 • • • • 65°C 95 • • YES 75°C 120 • • • • •• • • 45°C 140 • • • • • YES • • • .
27 N.B.: Should any of the situations occur and should the machine give a bad wash performance, it is necessary to remove the deposits from the dishes by hand since the final drying cycle hardens the deposits which a second wash in the machine would not be able to remove.
.
The manufacturer declines all responsibility in the event of any printing mistakes in this booklet. The manufacturer also reserves the right to make appropriate modifications to its products without changing the essential characteristics.
04.07- 4101291 1 - Printed in Italy - Imprimé en Italie EN.
An important point after buying a device Candy CDI 2012E10-S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Candy CDI 2012E10-S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Candy CDI 2012E10-S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Candy CDI 2012E10-S you will learn all the available features of the product, as well as information on its operation. The information that you get Candy CDI 2012E10-S will certainly help you make a decision on the purchase.
If you already are a holder of Candy CDI 2012E10-S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Candy CDI 2012E10-S.
However, one of the most important roles played by the user manual is to help in solving problems with Candy CDI 2012E10-S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Candy CDI 2012E10-S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
