Instruction/ maintenance manual of the product JB3495 Campbell Hausfeld
Go to page of 24
General Safety Information This manual contains safety, operational and maintenance information. Read this manual and understand all safety warnings and instructions before operating the nailer. Contact your Campbell Hausfeld representative if you have any questions.
2 The nailer could eject a fastener causing death or serious personal injury. ● ● Protect your eyes and ears. Wear Z87 safety glasses, with side shields. Wear hearing protection. Employers and users are responsible for ensuring the user or anyone near the nailer wears this safety protection.
3 Operating The Nailer Read this manual and understand all safety warnings and instructions before operating the nailer. LUBRICATION This nailer requires lubrication before using the nailer for the first time and before each use. If an inline oiler is used, manual lubrication through the air inlet is not required on a daily basis.
4. Carefully place no- mar tip over the end of work contact element. Position tip onto WCE making certain serrated gooves on each piece are in line and fit snugly together. 5. Position retaining ring on no- mar tip and press firmly in place. 6. Check that the WCE and trigger move up and down freely without sticking or binding.
6. Remove nailer from work surface. The Work Contact Element (WCE) must return to its original down position. Pull the trigger. The nailer MUST NOT OPERATE . Do not use the tool if it operates while lifted from the work surface. Personal injury may result.
6 Operating Instructions www.chpower.com 2. Remove all nails from the magazine (see Loading/ Unloading). Failure to do so will cause the nails to eject from the front of the tool. 3. Insert a screw- driver into the nose of the tool. Push up on the driver blade to free the jammed nail.
Model JB3495 7 Fasteners JB3495 Tool will drive fasteners designed for: Porter Cable FC 350A, Hitachi NR83AA2, Senco FramePro 701XP, 751XP , Ridgid R350CHA, DeWalt D51822, D51823, and Paslode F-3505.
Operating Instructions 8 www.chpower.com Limited W arranty 1. DURATION: From the date of purchase by the original purchaser as follows: Campbell Hausfeld — Three (3) Years. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Telephone: (800) 543-6400 3.
S’assurer que tous les utilisateurs lisent et comprennent parfaitement les notices de sécurité, étiquettes et instructions décrites dans ce manuel. Danger indique une situation hasardeuse imminente qui RÉSULTERA en perte de vie ou blessures graves.
● ● Protéger vos yeux avec des lunettes de sécurité Z87 à écrans latéraux et vos oreilles avec un protecteur auditif. Le patron et l’utilisateur sont responsables pour assurer que l’util.
● ● Nettoyer et vérifier tous les tuyaux et raccords avant de brancher la cloueuse au compresseur d’air. Remplacer les tuyaux ou les raccords endommagés ou usés, sinon, le rendement et la durabilité de l’outil seront affectés.
Il ne faut pas essayer de modifier les composants de la gâchette de quelque façon que ce soit ni essayer d’utiliser tout autre composant de gâchette que ceux prévus pour cet outil. Pour toutes questions, contacter le représentant Campbell Hausfeld.
3. S’assurer que la gâchette et le mécanisme de délenche- ment par contact ( WCE) se déplacent librement sans se coller ou se coincer. 4. Brancher de nouveau la source d’air à la cloueuse. 5. Appuyer le Mécanisme De Déclenche- ment Par Contact (WCE) contre la surface de travail sans tirer sur la gâchette.
Instructions D’Utilisation 6-Fr 3. S’assurer que la gâchette et le mécanisme de déclenchement par contact (WCE) se déplacent librement sans se coller ou se coincer après chaque réglage. ANTI-ACTIVATION À SEC L’outils est doté d’une fonction prévenant l’activation à sec.
Modèle JB3495 7-Fr Fuite d’air à l’endroit de la soupape de la gâchette Fuite d’air entre le carter et le nez Fuite d’air entre le carter et le capuchon La cloueuse saute un clou pendant l.
Instructions D’Utilisation 8-Fr Garantie Limitée 1. DURÉE : De la date d'achat par l'acheteur original comme suit : Campbell Hausfeld - trois (3) ans. 2. GARANTIE ACCORDÉE PAR (GARANT): Campbell Hausfeld/Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Téléphone: (800) 543-6400 3.
Informaciones Generales de Seguridad Este manual contiene información sobre seguridad, funcionamiento y manteimiento. Lea este manual y cerciórese de que comprende todas las medidas de seguridad e instrucciones antes de usar la clavadora. Comuníquese con un representante de Campbell Hausfeld si tiene alguna pregunta.
sujetadores. La clavadora puede expulsar un sujetador y producir la muerte o lesiones personales graves. ● ● Protéjase la vista y los oídos. Use anteojos de seguridad Z87, con protección lateral y tápese los oidos adecuadamente.
● ● Los compresores de aire usados para suministrarle aire a la clavadora deben cumplir los requerimientos establecidos por la organización norteamericana ANSI en el código B19.3-1981; sobre seguridad y estándards para compresores de aire industriales.
Manual de Instrucciones 4-Sp 3. Retire la argolla que sujeta a la punta no des- gastable. 4. Coloque cuidadosa- mente la punta no des- gastable sobre el extremo del elemento de contacto de trabajo (WCE).
Modelo JB3495 5-Sp 4. Reconectar el abaste- cimiento de aire a la clavadora. 5. Presione el elemento de contacto de trabajo (WCE) contra la superficie de trabajo sin tirar del gatillo. La clavadora NO DEBE FUNCIONAR . No utilice la herramienta si ésta funciona sin haber tirado del gatillo.
6-Sp Manual de Instrucciones CÓMO DESATASCAR LA CLAVADORA 1. Desconecte la clavadora del abaste- cimiento de aire. 2. Retire todos los clavos del cargador (ver Cómo cargar o Cómo descargar). Si se ignora este paso, los clavos saldrán disparados por la parte frontal de la herramienta.
7-Sp Modelo JB3495 Hay una fuga de aire en el área de la válvula del gatillo Hay una fuga de aire entre la cubierta y la boquilla Hay una fuga de aire entre la cubierta y la tapa La clavadora deja d.
8-Sp Manual de Instrucciones Garantía Limitada 1. DURACIÓN: Desde la fecha de compra por parte del comprador original, según se detalla: Campbell Hausfeld – 3 (tres) años. 2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100 Production Drive, Harrison, Ohio 45030 Teléfono: (800) 543-6400 3.
An important point after buying a device Campbell Hausfeld JB3495 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Campbell Hausfeld JB3495 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Campbell Hausfeld JB3495 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Campbell Hausfeld JB3495 you will learn all the available features of the product, as well as information on its operation. The information that you get Campbell Hausfeld JB3495 will certainly help you make a decision on the purchase.
If you already are a holder of Campbell Hausfeld JB3495, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Campbell Hausfeld JB3495.
However, one of the most important roles played by the user manual is to help in solving problems with Campbell Hausfeld JB3495. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Campbell Hausfeld JB3495 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
