Instruction/ maintenance manual of the product DG111800CD Campbell Hausfeld
Go to page of 14
28 Operating Instructions and Parts Manual DG111800CD & DG151800CD Cor dless Drill/Driver and Charger Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information.
Maximum Size Drill Bits Drill Model Max. Bit Size DG111800CD 3/8” (.375) DG151800CD 3/8” (.375) General Safety Information (Cont’d.) WORK AREA • Do not operate a power tool in an explosive atmosphere, such as in the presence of flammable liquids, gases, or dust.
26 Pg 3 DG111800CD & DG151800CD www.chpower.com General Safety Information (Cont’d.) • Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when working with these materials. Request and follow all safety information available from your material supplier.
25 Pg Operating Instructions and Parts Manual 4 www.chpower.com Charging Battery (Cont’d.) battery pack is connected to the charger and the charger is plugged in. With normal use, the battery pack will be fully charged after about three (3) to six (6) hours with charger DG111800CH and one (1) to two (2) hours with fast charger DG151800CH.
24 Pg Operation (Cont’d.) 7. Reduce the pressure on the drill just before the bit cuts through the work to avoid splintering wood or stalling in metal. 8. When bit has completely penetrated work and is spinning freely, withdraw it from the work while the motor is still running, then turn off drill.
23 Pg 6 Operating Instructions and Parts Manual Limited W arranty 1. DURATION: From the date of purchase by the original purchaser as follows: One Year. 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Telephone: (800) 424-8936 3.
22 Pg 7F r Déballage Lors du déballage, l’examiner soigneusement pour rechercher toute trace de dommage susceptible de s’être produit en cours de transport. Directives De Sécurité Ce manuel contient de l’information très importante qui est fournie pour la SÉCURITÉ et pour ÉVITER LES PROBLÈMES D’ÉQUIPEMENT.
21 Pg 8F r Instructions d’Utilisation et Manual de Pièces Directives De Sécurité (Suite) AIRE DE TRAVAIL • Ne pas faire fonctionner un outil électrique dans une atmosphère explosive comme en présence de liquides, gaz ou poussières inflammables.
20 Sp Garantía Limitada 1. DURACIÓN: A partir de la fecha de compra por parte del comprador original del modo siguiente: un año. 2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE) : Campbell Hausfeld / The Scott Fetzer Company 100 Production Drive, Harrison, Ohio 45030 Teléfono: (800) 424-8936.
19 Sp Funcionamiento (Continuación) también se aplica: 1. Use únicamente brocas helicoidales de acero para alta velocidad, de buena calidad y afiladas cuando perfore metal. 2. Comience a perforar con una velocidad lenta y aumente paulatinamente la velocidad a medida que el taladro va cortando.
Tamaños sugeridos de orificios para tornillos para madera Diámetro de la Pilot Drill Diameter Tamaño broca para Madera Madera del tornillo orif. de paso blanda dura #6 5/32 (.156) 1/16 (.062) 5/64 (.078) #8 11/64 (.172) 5/64 (.078) 3/32 (.093) #10 13/64 (.
17 Sp Instrucciones de seguridad para el cargador y las baterías (Continuación) batería. Puede provocar un incendio o lesiones. Antes de desechar la batería, proteja las terminales expuestas con cinta aisladora gruesa para evitar que se produzcan cortocircuitos.
Largo del cable en pies 25 50 100 150 Tamaño AWG del cable 18 18 18 16 Tamaño mínimo del cable (AWG) de extensión para el cargador de batería Informaciones Generales de Seguridad (Continuación) bordes de corte afilados se atasquen y además son más fáciles de controlar.
15 Sp Informaciones Generales de Seguridad (Continuación) ÁREA DE TRABAJO • No haga funcionar una herramienta a motor en un entorno explosivo, como por ejemplo cuando haya líquidos, gases o polvo inflamable. Las herramientas a motor hacen chispas que pueden encender los gases o el polvo.
An important point after buying a device Campbell Hausfeld DG111800CD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Campbell Hausfeld DG111800CD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Campbell Hausfeld DG111800CD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Campbell Hausfeld DG111800CD you will learn all the available features of the product, as well as information on its operation. The information that you get Campbell Hausfeld DG111800CD will certainly help you make a decision on the purchase.
If you already are a holder of Campbell Hausfeld DG111800CD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Campbell Hausfeld DG111800CD.
However, one of the most important roles played by the user manual is to help in solving problems with Campbell Hausfeld DG111800CD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Campbell Hausfeld DG111800CD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
