Instruction/ maintenance manual of the product MC630HD Cambridge SoundWorks
Go to page of 12
.
.
- 3 - Contents Introduction ................................................................... 4 Product Contents .......................................................... 4 Inspecting for Damage .................................................. 4 System Conguration .
- 4 - Thank you for choosing a Newton HD Series speaker . The MC630HD features the nest drivers, precision internal crossover circuitry , and an elegant enclosure design. The design team at Cambridge SoundW orks believes there is no better combination of audiophile-level attention to detail and reasonable cost.
- 5 - For the most balanced performance use an MC630HD on all channels of the surround-sound system. They are also excellent to use as rear or surround speakers in a system using MC650HD front speakers.
- 6 - Wiring The Speakers If you wish to conceal the wire within the walls, it is easiest to run the wires to their nal positions prior to mounting the speakers. The spring loaded terminals of the MC630HD accept bare wire between AWG #12 and AWG #18 (lower numbers are thicker).
- 7 - Speaker Mounting Use a keyhole slot to hang the speaker from a screwhead. The MC630HD may be wall mounted or placed horizontally on a table-top as a center-channel using the included hardware. Matching oor and table-top stands are available separately from Cambridge SoundWorks.
- 8 - Placing Horizontally On a T abletop Or Shelf Attach the rear support into the channel on the rear of the speaker using the included ¼-20 machine screw . Tighten the set-screw nger-tight to stabilize the support. Attach two rubber hook-shaped stick-on feet symmetrically along the bottom edge of the speaker approximately 10” apart.
- 9 - Enclosure Cleaning Setting Bass Contour The switch located near the connection terminals optimizes the low frequency response of the speaker for wall or stand mounting. When the speaker is mounted on a speaker stand, away from the wall press the end of the switch marked with “|”.
- 10 - 6 1/2” 17 5/16” 3 7/8” 3 1/4” 2 7/8” 8 1/4” 10” Dimensions: 17 5/16” H x 6 1/2” W x 3 7/8” D Weight: 14 pounds each Impedance: nominal 8 ohms Recommended amplier power ra.
.
P81-2460 120 W ater Street North Andover, MA 01845 (800) FOR-HIFI (1-800-367-4434) www .cambridgesoundworks.com email: info@cambridgesoundworks.com.
An important point after buying a device Cambridge SoundWorks MC630HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cambridge SoundWorks MC630HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cambridge SoundWorks MC630HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cambridge SoundWorks MC630HD you will learn all the available features of the product, as well as information on its operation. The information that you get Cambridge SoundWorks MC630HD will certainly help you make a decision on the purchase.
If you already are a holder of Cambridge SoundWorks MC630HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cambridge SoundWorks MC630HD.
However, one of the most important roles played by the user manual is to help in solving problems with Cambridge SoundWorks MC630HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cambridge SoundWorks MC630HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
