Instruction/ maintenance manual of the product U37 CAD Audio
Go to page of 2
U 3 7 USB Studio Recor ding Micr ophone The U3 7 is a side-address microphone. When recording, speak or play into the side of the mic that has the CAD logo. The U37 has two switches on the front. The fi rst switch allows you to decrease the sensitivity of the microphone so the sound quality is clear for extremely loud sounds.
Mac OSX recognition instructions 1. Plug the U3 7 into the USB port on the computer . (When using a USB hub, check with the hub manufacturer to be sure the hub supports a device such as a microphone. Plug the U3 7 directly into the computer’ s powered USB port for optimal performance.
An important point after buying a device CAD Audio U37 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CAD Audio U37 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CAD Audio U37 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CAD Audio U37 you will learn all the available features of the product, as well as information on its operation. The information that you get CAD Audio U37 will certainly help you make a decision on the purchase.
If you already are a holder of CAD Audio U37, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CAD Audio U37.
However, one of the most important roles played by the user manual is to help in solving problems with CAD Audio U37. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CAD Audio U37 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
