Instruction/ maintenance manual of the product Expansion module 9H532-17 Cabletron Systems
Go to page of 38
9033184-01 SmartSwitch 9000 9H531-17 & 9H532-17 17 Port Fast Ethernet Module User’s Guide.
.
i Notice NOTICE Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether an y such changes hav e been made.
Notice ii CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT IMPOR T ANT : THIS LICENSE APPLIES FOR USE OF PRODUCT IN THE FOLLO WING GEOGRAPHICAL REGIONS: CANAD A MEXICO CENTRAL AMERICA SOUTH AMERICA BEFORE OPENING OR UTILIZING THE ENCLOSED PR ODUCT , CAREFULL Y READ THIS LICENSE A GREEMENT .
iii Notice 6. EXCLUSION OF WARRANTY. Except as may be specifically provided by Cabletron in writing, Cabletron makes no warranty, expressed or implied, concerning the Program (including its documentation and media).
Notice iv export to Country Groups D:1 or E:2 the direct product of the plant or a major component thereof, if such foreign produced direct product is subject to national security controls as identified on the U.S. Commerce Control List or is subject to State Department controls under the U.
v Notice 4. EXPORT REQUIREMENTS. You understand that Cabletron and its Affiliates are subject to regulation by agencies of the U.S. Government, including the U.S. Department of Commerce, which prohibit export or diversion of certain technical products to certain countries, unless a license to export the product is obtained from the U.
Notice vi DECLARATION OF CONFORMITY Application of Council Directiv e(s): 89/336/EEC 73/23/EEC Manufacturer’ s Name: Cabletron Systems, Inc. Manufacturer’ s Address: 35 Industrial Way PO Box 5005 Rochester, NH 03867 European Representativ e Name: Mr.
vii Contents Chapter 1 Intr oduction Features........................................................................................................................... 1-1 Related Manuals ..............................................................
Contents viii Performance ..................................................................................................... 5-1 Regulatory Compliance......................................................................................... 5-2 Service .
1-1 Chapter 1 Intr oduction The 9H531-17 and 9H532-17, shown in Figure 1-1, ar e SmartSwitch ® Modules for the SmartSwitch 9000. The 9H531-17 and 9H532-17 are seventeen port switch modules, with sixteen 10BASE-T/100BASE-TX or 100BASE-FX ports and one VHSIM (V ery High Speed Interface Module), on the front panel.
Introduction 1-2 Figure 1-1. The 9H531-17 and 9H532-17 FAST ENET 9H531-17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 FAST ENET 9H532-17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1.
1-3 Introduction A uto-Negotiation - Speed/Duplex Mode The twisted pair ports on the front panel of the 9H532-17 module have the ability to auto-negotiate the type of connection requir ed to provide a link to another device.
Introduction 1-4 SmartTrunk SmartT runk, also r eferred to as SmartT runking, is Cabletr on Systems’ terminology for load balancing or load sharing. SmartT runk technology pr ovides an easy-to-imple.
1-5 Introduction Cabletron Systems RMON Actions is a vendor-specific extension of RMON and provides the ability to set an “Action” on any SNMP MIB variable. The Action can be triggered by setting an RMON Event and/or Alarm. An example of an Action would be to turn off a MIB-2 interface if a br oadcast threshold is crossed.
Introduction 1-6 Switching Options The 9H531-17 and 9H532-17 provide IEEE Standar d-based 802.1 switching or SecureFast Switching V irtual Network Services. In the 802.1 mode (the default mode of operation), the switch functions as an 802.1D switch. When until VLANs are configur ed, it operates as an 802.
1-7 Introduction Optional HSIM and VHSIM The modules provide a slot for an optional High Speed Interface Module (HSIM) or V ery High Speed Interface Module (VHSIM) for additional connectivity to various networking technologies. The Release Notes that are shipped with the product list exceptions to the HSIMs and VHSIMs that operate in the modules.
Introduction 1-8 HSIM-W85 User ’ s Guide HSIM-W87 User ’ s Guide VHSIM-A6DP User ’ s Guide VHSIM-G6 User ’ s Guide Getting Help For additional support related to this device or document, conta.
2-1 Chapter 2 Installing the Smar tSwitc h 9000 Module Unpac king the Module 1. Carefully r emove the module from the shipping box. (Save the box and packing materials in the event the module must be reshipped.) 2. Remove the module from the plastic bag.
Installing the Smar tSwitch 9000 Module 2-2 2. Attach the antistatic wrist strap (refer to the instr uctions outlined on the antistatic wrist strap package). 3. Unlock the top and bottom plastic locking tabs of the module faceplate. 4. Slide out the module, and place it on its side with the internal components facing up.
2-3 Installing the Smar tSwitch 9000 Module Figure 2-1. User-Accessib le Components SMB-1 PROM Flash SIMM So cke t 32 MB DRAM i960 Processor DIP Switch Boot PROM 1 2 3 4 5 6 7 8 HSIM Connector VHSIM C.
Installing the Smar tSwitch 9000 Module 2-4 An eight-position DIP switch is located on the module car d as shown in Figure 2-1. The function of the switches ar e listed in T able 2-1.
2-5 Installing the Smar tSwitch 9000 Module Using DIP Switch 6 The purpose of DIP switch 6 is to for ce a Flash download from a BootP server through the EM-EPIM. The first step in this pr ocess is to configure the BootP server . Configurations of BootP servers can dif fer from platform to platform and from one operating system to another .
Installing the Smar tSwitch 9000 Module 2-6 Installing the Module into the Smar tSwitch 9000 Chassis T o install the SmartSwitch 9000 module, follow the steps below: 1. Remove the blank panel covering the two slots in which the module is being installed.
2-7 Installing the Smar tSwitch 9000 Module Figure 2-2. Installing the 9H531-17 and 9H532-17 Modules 7 F L N K 8 F L N K F L N K 10 F L N K I N S 11 F L N K I N S 12 RX TX RX TX RX Circuit Card Card Guides Metal Back-Panel Jack for ESD wrist strap W arning: Ensure that the circuit card is between the card guides .
Installing the Smar tSwitch 9000 Module 2-8 The Reset Switch The Reset switch is located under the top plastic tab as shown in Figure 2-3. Use the reset switch to r eset the module’s processor , shutdown (power down) the module, and/or restart the module.
2-9 Installing the Smar tSwitch 9000 Module Cabling Requirements 10B ASE-T Network When connecting a 10BASE-T segment to the front panel ports of a 9H532-17 module, ensure that the network meets the Ethernet network r equirements of the IEEE 802.3 standard for 10BASE-T .
Installing the Smar tSwitch 9000 Module 2-10.
3-1 Chapter 3 T ec hnical Over vie w Smar tSwitch Ar chitecture The SmartSwitch Architecture of the 9H531-17 and 9H532-17 modules, as shown in Figure 3-1, are configurable for one of two modes of operation: traditional IEEE 802.1 switching, or SecureFast switching.
T echnical Overview 3-2 Figure 3-1. Block Dia gram I N B A B i960 Processor Smart Switch Fabric VHSIM INB ASIC SMB 1 SMB 10 Ethernet Controller Diagnostic Controller SmartSwitch 9000 Backplane Front P.
3-3 T echnical Overview System Management Buses There ar e two management channels within the SmartSwitch 9000 system: the SMB-1 and the SMB-10. These buses provide out-of-band management and inter-module management communication. SMB-1 Bus The SMB-1 is a 1 Mbps management bus located within the SmartSwitch 9000.
T echnical Overview 3-4 System Diagnostic Contr oller This diagnostic controller is composed of a Z-80 micr oprocessor and its supporting logic. The diagnostic controller is designed to contr ol the p.
4-1 Chapter 4 LANVIEW LEDs The front panel LANVIEW LEDs indicate the status of the module and may be used as an aid in troubleshooting. Figur e 4-1 shows the LANVIEW LEDs of the 9H531-17 and 9H532-17 modules.
LANVIEW LEDs 4-2 Figure 4-1. The LANVIEW LEDs (9H532-17 shown) and LED Mode Switch The functions of the two System Status LEDs, System Management Bus (SMB) and the CPU, are listed in T able 4-1.
4-3 LANVIEW LEDs The functions of the INB transmit LED are listed in T able 4-2. The functions of the INB receive LED ar e listed in T able 4-3. The functions of the Ethernet T ransmit and Ethernet Receive LEDs ar e listed in T able 4-4 and T able 4-5.
LANVIEW LEDs 4-4 The functions of the Speed and Full Duplex LEDs are list in T able 4-6 and T able 4-7. These LED indications are only valid when the LED MODE switch is in the DPX-SPD position.
5-1 Chapter 5 Specifications T echnical Specifications CPUs PowerPC Intel i960 RISC-based micropr ocessor Memory 8 MB Flash Memory (expandable to 16 MB) 32 MB DRAM (local) 4 MB Memory (Shared) Netwo.
Specifications 5-2 Regulatory Compliance This equipment meets the following safety and electromagnetic compatibility (EMC) requir ements: Safety UL 1950, CSA C22.2 No. 950, EN 60950, IEC 950, and 73/23/EEC Electromagnetic Compatibility (EMC) FCC Part 15, EN 55022, CISPR 22, CSA C108.
An important point after buying a device Cabletron Systems Expansion module 9H532-17 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cabletron Systems Expansion module 9H532-17 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cabletron Systems Expansion module 9H532-17 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cabletron Systems Expansion module 9H532-17 you will learn all the available features of the product, as well as information on its operation. The information that you get Cabletron Systems Expansion module 9H532-17 will certainly help you make a decision on the purchase.
If you already are a holder of Cabletron Systems Expansion module 9H532-17, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cabletron Systems Expansion module 9H532-17.
However, one of the most important roles played by the user manual is to help in solving problems with Cabletron Systems Expansion module 9H532-17. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cabletron Systems Expansion module 9H532-17 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
