Instruction/ maintenance manual of the product 29055 Cables to Go
Go to page of 21
1 U SER G UIDE 2-P ORT USB 3.0 S UPER S PEED PCI E XPRESS C ARD Model: 29055.
1 Introduction .................................................................................................................. ...................................................... 2 Features .......................................................
2 Thank you for purchasing the 2-Port USB 3.0 Supe rSpeed PCI Express Card. The 2-Port USB 3.0 SuperSpeed PCI Express Card adds SuperSpeed USB cap abilities to your computer. Simply install this card into an available PCI slot on your computer to add two USB 3.
3 Adds two USB 3.0 A-Male ports to a computer Connects internally via the PCI-e connector 5 Gbps signaling rate- 10X faster than USB 2.0 Backwards compatible with USB 2.
4 Operating System: Windows 7, XP, or Vista™ S YSTEM R EQUIREMENTS.
5 2-Port USB 3.0 SuperSpeed PCI Express Card Driver CD User Guide P ACKAGE C ONTENTS.
6 D EVICE O VERVIEW USB 3.0 Ports.
7 Before you install the device in your computer, you will need to install the necessary driver for proper operation. Please follow the procedure below. For Windows XP, Vista, Windows 7 Note: The following setup is an example shown using a Windows XP operating system.
8 Step 2 After reading the End-User License Agreement, please select “I accept the terms in the License Agreement” and click Next . Step 3 Please click Browse to choose the destination folder, and then click Next .
9 Step 4 Click Install to begin driver installation. The driver installation may take a few minutes. You may also get a software installation Windows security pop-up during this time. Click Continue Anyway when it appears to complete the installation.
10 Step 5 When the installation has completed, click Finish to exit the setup wizard. D RIVER I NSTALLATION.
11 Step 1 Turn off your computer and remove th e cover/panel to expose the PCI slot. Step 2 Plug the 2-Port USB 3.0 Card into the PCI slot on the computer. Step 3 Replace the cover/panel and turn on your computer. When your computer starts up, a Found New Hardware Wizard will appear.
12 Step 4 When the Found New Hardware Wizard appears, select Yes, this time only , and click Next . Step 5 Choose Install the software autom atically and click Next . The Windows security pop-up may appear during this process. Click Continue Anyway to continue with the installation.
13 Step 6 Click Finish to complete the installation and exit the wizard. Step 7 The Found New Hardware Wizard will appear aga in. Repeat steps 4-6 for second USB 3.
14 After you have completed the driver and device installation, you can go to the Device Manager to verify the product is installed and recognized properly.
15 Product No. 29055 Complies USB Rev. Ver. 3.0 PCI Express Base Specification Revision 2.0; PCI Bus Power Management Interface Specification: Revision 1.
16 At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience proble ms due to workmanship or material defect for the duration of this warranty, we will repair or repl ace this device.
17 ! Do not plug the unit in any outlet that does not have en ough current to allow the device to function. Refer to the specifications in this manual fo r power level of the unit. ! Liquid: If this unit or its corresponding powe r adapter has had liquid sp illed on or in it, do not attempt to use the unit.
18 FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received.
19.
20 For more information on this produc t or to check for updated drivers, manuals or frequently asked questi ons please visit our website. www.cablestogo.
An important point after buying a device Cables to Go 29055 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cables to Go 29055 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cables to Go 29055 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cables to Go 29055 you will learn all the available features of the product, as well as information on its operation. The information that you get Cables to Go 29055 will certainly help you make a decision on the purchase.
If you already are a holder of Cables to Go 29055, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cables to Go 29055.
However, one of the most important roles played by the user manual is to help in solving problems with Cables to Go 29055. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cables to Go 29055 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
