Instruction/ maintenance manual of the product HSW88C Cable Electronics
Go to page of 10
INSTRUCTION MANUAL 8x8 HDMI over CAT5 Matrix with IR Pass-through HSW88C CE labs can support many areas of your audio and video distribution needs. W e manufacture: • Digital Signage software and Me.
SAFETEY NOTICE 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/W riter to retrieve and provide DVI/HDMI EDID infor mation. 2. All HDMI over CA T5 transmission distances are measured using Belden 1583A CA T5e 125MHz LAN cable and ASTRODESIGN Video Signal Generator VG-859C.
The HSW88C 8x8 HDMI over CAT5 Matrix Switch with IR Pass-through provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1-channel) digital audio from any of the eight HDMI source devices to the remote displays at the same time.
• State-of-the-art Silicon Image (Founder of HDMI) chipset embedded for upmost compatibility and reliability • HDMI 1.3c compliant • HDCP compliant • Allows any source to be displayed on multiple displays at the same time • Allows any HDMI display to view any HDMI source at any time • Supports 7.
Method C: Software Control Through RS-232 or USB Software Control Menu 1. S can button: Serial Port Scan: Press Scan button, the computer will scan the all com port and display them. Select the RS232 serial port connected to the Matrix switch. And set device ID 255 is for all device.
Method A: Push button for switching input channels Press the INPUT SELECT push button to switch the input source on the respective output port connected to the matrix receiver in sequential order . The selected input source will be displayed on the LED of INPUT CHANNEL.
Method A: Push Button 1. Use the switch button on output port to select which port to be changed. (+) increase (–) decrease 2. Push the switch button on Input channel. The source will be sequentially changed. After few seconds, the setting will be active.
HARDWARE INSTALLATION HSW88C as Master 1. Connect all sources to HDMI Inputs on the 8x8 HDMI over CA T5 matrix master HSW88C 2. Connect each DDC output port on the HSW88C to respective DDC port on the remote receiver HSMR 3. Connect each TMDS output port on the HSW88C to respective TMDS input on the remote receiver HSMR 4.
DIP SWITCH Definition of IR Earphone Jack Supported IR Data Format Data For mat Suitable Not Recommended NEC RC5 TOSHIBA MICOM CODE GRUNDIG CODE SONY 12 BIT CODE SONY 15 BIT CODE SONY 20 BIT CODE RCA .
IR CONTROL PATH SW Main for firmware update (for technical support only) Note 6. Factory default for SW Main is pin#1-OFF[ ], pin#2-OFF[ ], pin#3- OFF[ ], & pin#4-OFF[ ]. PLEASE MAINT AIN THIS SETTING A T ANYTIME FOR REGULAR USE VIA RS-232 CONTROL! 7.
An important point after buying a device Cable Electronics HSW88C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cable Electronics HSW88C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cable Electronics HSW88C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cable Electronics HSW88C you will learn all the available features of the product, as well as information on its operation. The information that you get Cable Electronics HSW88C will certainly help you make a decision on the purchase.
If you already are a holder of Cable Electronics HSW88C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cable Electronics HSW88C.
However, one of the most important roles played by the user manual is to help in solving problems with Cable Electronics HSW88C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cable Electronics HSW88C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
