Instruction/ maintenance manual of the product 53-0021 Bushnell
Go to page of 9
Model: 53-0021 Lit. #: 98-0579/04-05 Instruction Manual.
INTRODUCTION The Bushnell® Holosight® XLP is based on advanced holographic technology . The Bushnell® Holosight® XLP enhances target acquisition, improv es accuracy , and provides a high level of control within the shooting environment.
BA TTERIES T wo (2) T ype AAA alkaline 1.5 V batteries are required to operate the Bushnell® Holosight® XLP . The Bushnell® Holosight® XLP is designed to maintain constant brightness at a particular setting even as the batteries drain through normal use.
2. OFF T o turn the sight off press both UP and DO WN push-button switches simultaneously . V erify that the unit is off by looking through the display window . 3. Brightness Adjustment P ush-button switches vary the brightness intensity of the holographic reticle image.
NOTE: Loosen the r etaining scr ew just enough to mount or r emove the sight. It is not necessary to r emov e the screw completely , as the lock hardwar e will not be retained in the sight and could be lost. T o mount the sight to a 12 gauge R emington model 870, 1100 or 1187 shotgun, follow these steps, r efer to F igure 4: 1.
make adjustments before mounting the sight on the fi rearm. Be sure to check that the mount and the sight remain fully secured after the fi rst 2 to 3 shots. CAUTION -When a sudden increase in resistance in the adjustment screw is felt, the end of the adjustment range has been reached.
W ARRANTY / REP AIR TWO-YEAR LIMITED W ARRANTY Y our Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty , we will, at our option, repair or replace the product, provided that you return the product postage pr epaid.
12 FCC COMPLIANCE The Bushnell® Holosight® XLP complies with Part 15b of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesir ed operation.
©2005 Bushnell Performance Optics www.bushnell.com.
An important point after buying a device Bushnell 53-0021 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bushnell 53-0021 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bushnell 53-0021 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bushnell 53-0021 you will learn all the available features of the product, as well as information on its operation. The information that you get Bushnell 53-0021 will certainly help you make a decision on the purchase.
If you already are a holder of Bushnell 53-0021, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bushnell 53-0021.
However, one of the most important roles played by the user manual is to help in solving problems with Bushnell 53-0021. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bushnell 53-0021 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
