Instruction/ maintenance manual of the product 118326 Bushnell
Go to page of 21
U ser Manual Model#: 118326 LIT. #: 980917/0909 Digit al Camera binoCular.
2 Camera and Binocular Parts Guide (I) USB Port (H) Remote Jack (J) Card Slot (G) Battery Compartment (M) Camera Lens (L) SNAP Button (K) Binocular Focus (A) LCD Displa y (D) 5-way Keypad w/ “Enter.
3 1) T he SyncFocus is pow ered by two AAA ba tteries (not included). Insert batt eries int o the compartment (G) , using the polarity marks inside for refer ence. A power met er in the lower left corner of the display indicates battery condition. 2) Inser t an SD card into slot (J) if greater storage is desired.
4 T o stop recording the video, press the SNAP button again. By default, videos are recorded as a 15 second loop (“instant replay”). T o change this, press MENU -the rst item is “Resolution” .
5 Loading Batteries T ur n the SyncF ocus o ver , slide open the batter y cover as indicated by the arro w , r emove and set aside . Insert 2 AAA Alkaline or Lithium batteries into the compartment (G) in the direction indicated inside, then replace the cover , sliding it back into place until it clicks.
6 BASIC SETUP Setting the Date and Time/Date Stamp F eature Y ou may want to go into the main options menu and set the correct date and time before beginning to take photos (or turn o the date stamp featur e, as the default setting is “ on”). T o set date and time: Raise the LCD displa y and press the 1.
7 Setting the Reticle Focus and Diopter A djustment Before you begin tak ing photos, a few simple, one -time adjustments should be made to ensure that you can get sharp photos of any subject by just using the main focus knob on the binoculars.
8 Once set, note the number on the left and right binocular tubes that the index mark on each eyecup is lined up with. With the reticle f ocus and diopter adjustment set to these positions, you should.
9 T AKING STILL PHOTOS After completing the basic and Syncfocus setups as described in the previous pages, you are ready to take a photo: Raise the L CD display 1. (A) and br iey press and release the ON/OFF butt on-the startup screen will appear , followed by the live image from the camera lens.
10 The “r emaining photos ” 4-digit counter in the low er left corner of the display abo ve the batter y indicator 5. will drop by one number after each photo (or two, depending on your subject and settings) is taken.
11 SHOOTING VIDEOS SET TING/USING VIDEO MODE T o switch from still photo to video mode, press the Right arrow key 3 times, until the red movie camera icon is display ed at the top right area of the L CD (see “LCD Preview Display Icons” , #10 ).
12 L CD Preview Displa y Icons # Icon 1 Battery Indicator (full battery shown) 2 # of Photos Remaining (based on unused internal or card memory) 3 Internal or Card Memory 4 White Balance Setting ( A u.
13 Using the Main Menu- Options and Settings As mentioned ear lier in this manual, your SyncFocus is already set for high resolution and quality right out of the box.
14 OPTION SETTINGS DESCRIPTION Resolution ( Video Size) 640x480 30F Loop , 640x480 30F Norm, 640x480 15F Loop , 640x480 15F Norm, 320x240 30F Loop , 320x240 30F Norm, 320x240 15F Loop , 320x240 15F Norm “640x480” or “320x240”=resolution in pix els per video frame .
15 OPTION SETTINGS DESCRIPTION White Balance Auto , Dayligh t, Cloudy , Fluoresc ent, Tungsten Sets the referenc e for neutral white, so that colors are reproduced correctly . I f “ Auto” does not provide good results, try the setting that matches the light source .
16 OPTION SETTINGS DESCRIPTION Date Stamp MM/DD/YY , YY/MM/DD, OFF Use the rst two settings if you want the dat e and time imprinted in the lower right corner of all y our photos-you have the option of month rst or y ear rst formats. The time will also be included-only 24 hr format is available.
17 OPTION SETTINGS DESCRIPTION Delete One OK , Cancel Highlight “OK” and press Enter to delete the currently displayed photo or video . If pressed accidently , highlight “CANCEL ” and press Enter . Format OK, Canc el Same as above except deletes entir e contents of internal or card memory.
18 1. T urn on the SyncF ocus (press ON/OFF ). Connect the supplied cable to the USB por t (I) below the SD car d slot on the SyncF ocus ( pull down the rubb er cover ap-please refer to the “Came.
19 5. After the photos are transferred to your computer , you can disconnect the SyncF ocus. Windows 2000 may produce a screen warning that you have disconnected a USB device without stopping or ejecting the “ disk ” rst (your photo les will not be harmed).
Specications and designs are subject to change without any notice or obligation on the part of the manufacturer . FCC Compliance Statement: is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to par t 15 of the FCC Rules.
©2009 Bushnell Outdoor Products For further qu estions or additional information please contact: Bushnell Outdoor Products 9200 Cody , Overland Park, Kansas 66214 (800) 423-3537 • www .
An important point after buying a device Bushnell 118326 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bushnell 118326 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bushnell 118326 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bushnell 118326 you will learn all the available features of the product, as well as information on its operation. The information that you get Bushnell 118326 will certainly help you make a decision on the purchase.
If you already are a holder of Bushnell 118326, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bushnell 118326.
However, one of the most important roles played by the user manual is to help in solving problems with Bushnell 118326. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bushnell 118326 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
