Instruction/ maintenance manual of the product DFTA16HD Bush
Go to page of 19
INSTRUCTION MANUAL The Gold T echnical Support Line: 1902 215 259 (Charges will apply at $2.95 per minute) DFTA16HD High Definition Digital Set T op Box Ϊ ͸ Ã÷ ´°.
Important Safety Instructions The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit. The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
Thank you for b uying this Bush product, which is designed to give you many years of t rouble-free service. Yo u may already be familiar w ith using a similar u nit, but p lease take time to read these instructions. They are designed to familiarise you with the unit s m any features and to ensure you get t he very best from your purchase.
About t he Set T op Box This Set T op Box R eceiver a llows you to access Digital T V Channels and Radio Broadcasts on your T V set. Its digital r eception covers VHF & UHF band. D igital T V eliminates noise and interference and offers high quality video and audio.
Table of Contents Front and Rear Panel .......................................................................................... 5 Remote Control.... ........................................................................................... ..6 Connections.
Front and Rear Panel 1. Front panel 2. Rear panel 1. STANDBY INDICATOR: Displays when the unit is in Power mode and Standby mode. The indicator will show as green when the unit is on and red when in standby. 2. REMOTE CONTROL SENSOR: Receives the signal from your remote control.
Remote Control 1. MUTE: Press the Mute Button to cut the sound only . Press again to turn sound on. 2. INFO: Press the Info Button to display the program information.
Installing the Batteries Remove the battery cover from the Remote Control and put 2xAAA size batteries inside the compartment. The diagram inside the Battery Compartment shows the correct way to install the batteries. 1.Open the cover 2.Install batteries 3.
TV TV Aerial VCR Amplifier Coaxial Cable Coaxial Power Adaptor Connections Caution: Make sure to check the voltage specification of the wall outlet is the same rating with the receiver. To prevent the risk of electric shock, do not open the cover or the back of the receiver .
First Time Installation After all connections have been made properly and power is connected, switch on the TV and the Set T op Box. When using the receiver for the first time or after you have conducted a restore to Factory Default the Installation Guide will appear on your TV screen.
Setting Favourite Programs The Favourite function in the program settings allows you to create a shortlist of favourite programs that you can easily access.
Picture Setting To access the Picture Menu, press Menu Button then select the [Picture] sub-menu. The Picture menu allows you to adjust the picture and video settings. Press the Up/Down Navigate Buttons to select an option and press the Right/Left Navigate Buttons to adjust that setting.
Manual Search In the Channel Search Menu you can select Manual Search, which means you can manually select the channels you wish to search for and store in the channel list. You can use this option to add new channels to the channel list with out replacing the whole list.
Sleep In the Time Menu you can set the Set Top Box Sleep Time. If the Sleep Time is on the Set Top Box will turn off after the set number of hours. When the Set Top Box has been on for the set number of hours a pop up message will tell you that the Set T op Box will now turn to standby .
Factory Default In the System Setting Menu you can select the Factory Default option to conduct a settings reset. In the Main Menu, select [Factory Default] and then press OK or Right to select. Y ou will then need to enter your password or the default password '000000' to gain access to this section.
Troubleshooting 15 Problem Potential Reasons What to do No picture No Picture No Sound The Remote Control is not responding Power isn't connected Power is not on Video Cables not connected Pictur.
Technical Specifications Item Sub Item Parameter Tuner Video Audio Power Input Frequency RF Input level IF Bandwidth Modulation Decoder Format Output Format Output Port Decoder Format Audio output Vol.
PO BOX 6287, SILVERWA TER NSW 1811 www.bushaustralia.com.au Bush : 1800 509 394 Australia Bush : 0800 450 259 New Zealand Warranty Warranty Please keep your receipt as proof of purchase. This product is warranted for any defect in materials or workmanship for one year after the original date of purchase.
PO BOX 6287, SIL VER WA TER NSW 1811 www .bushaustralia.com.au.
An important point after buying a device Bush DFTA16HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bush DFTA16HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bush DFTA16HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bush DFTA16HD you will learn all the available features of the product, as well as information on its operation. The information that you get Bush DFTA16HD will certainly help you make a decision on the purchase.
If you already are a holder of Bush DFTA16HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bush DFTA16HD.
However, one of the most important roles played by the user manual is to help in solving problems with Bush DFTA16HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bush DFTA16HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
