Instruction/ maintenance manual of the product VP17 Bunn
Go to page of 16
VP17 Series SERVICE & REP AIR MANUAL BUNN-O-MA TIC CORPORA TION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 PHONE: (217) 529-6601 F AX: (217) 529-6644 46721.
Page 2 46721 030912 BUNN-O-MA TIC COMMERCIAL PRODUCT W ARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal ser vers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor .
Page 3 SERVICE This manual provides procedures for testing and replacing various major components used in this brewer should service become necessar y .
Page 4 P1263 Location: The control thermostat is located inside the trunk on the left side of the component bracket. T est Procedures: 1. Disconnect the brewer from the power source. 2. With a voltmeter , check the voltage across the blue wire on the control thermostat and the white wire on the tank heater .
Page 5 SERVICE (cont.) 46721 052512 LIMIT THERMOST A T P1161.40 FIG. 4 LIMIT THERMOST A T Location: The limit thermostat is located inside the rear of the hood on the tank lid. T est Procedures: 1. Disconnect the brewer from the power source. 2. Disconnect the blue and black wires from the limit thermostat.
Page 6 If voltage is not present as described, refer to the Wiring Diagrams and check the brewer wiring harness. 5. With the black wire removed, remove the wire from the lower terminal. 6. Check for continuity across the center and lower terminal with the switch in the "ON" (upper) posi- tion.
Page 7 SERVICE (cont.) 46721 052512 T ANK HEA TER P1161.40 Location: The tank heater is located inside the tank and secured to the tank lid. T est Procedures: 1. Disconnect the brewer from the power supply . 2. With a voltmeter , check the voltage across the black and white wires on the tank heater .
Page 8 Location: On Early VP17 Models the tank heater switch is located on the rear of the brewer on the upper left side of the trunk. On VP17B Models the tank heater switch is located on left side of the control panel. T est Procedure: 1. Disconnect the brewer from the power source.
Page 9 SERVICE (cont.) 13. Set tank assembly inside the hood on mounting brackets and secure with two #8-32 screws. 14. Reconnect the wires to the limit thermostat, tank heater and the control thermostat. Refer to Limit Thermostat, T ank Heater and Control Thermo- stat sections in this manual when reconnecting wires.
Page 10 WARMER ELEMENT(S) P1167 SERVICE (cont.) Location: The warmer element(s) is located under the warmer plate. T est Procedures: 1. Disconnect the brewer from the power source.
Page 11 46721 052512 SCHEMA TIC WIRING DIAGRAM VP17-1/-2/-3 10862.0003H 09/06 ©1997 BUNN-O-MA TIC CORPORA TION WHI WHI WHI WHI WHI WHI LOWER WARMER N WHI 120 VOL TS AC 2 WIRE + GND SINGLE PHASE BLK BRN/BLK BRN/BLK BLK VIO VIO VP17-3 2 SIDE WARMERS 1320W BLK TA NK HEA TER L1 GRN BLK BLU SW .
Page 12 46721 052512 SCHEMA TIC WIRING DIAGRAM VP17-1/-2/-3 10862.0000B 9/00 ©1995 BUNN-O-MA TIC CORPORA TION P2 P1 FRONT WARMER WHI WHI P3 WHI BRN/BLK VIO WHI REAR WARMER WHI WHI LOWER WARMER N WHI .
Page 13 46721 052512 SCHEMA TIC WIRING DIAGRAM VP17B-1/-2/-3 10862.0002G 09/06 ©1997 BUNN-O-MA TIC CORPORA TION P2 P1 FRONT WARMER WHI WHI P3 WHI BRN/BLK VIO WHI REAR WARMER WHI WHI LOWER WARMER N WHI 100 VOL TS AC 2 WIRE + GND SINGLE PHASE BLK BRN/BLK BLK VIO BLK TA NK HEA TER L1 GRN BLK HEA TER SWITCH BLK BLU READY INDICA TOR BLU SW .
Page 14 2 TOP or SIDE WARMERS NOT USED ON LA TE MODELS WITH SIDE WARMERS 10862.0001L 01/07 ©1995 BUNN-O-MA TIC CORPORA TION 220-240 VOL TS AC 2 WIRE + GND SINGLE PHASE BLK L1 L2 BLK RED MAIN ON/OFF S.
Page 15 46721 052512.
Page 16 46721 052512.
An important point after buying a device Bunn VP17 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn VP17 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn VP17 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn VP17 you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn VP17 will certainly help you make a decision on the purchase.
If you already are a holder of Bunn VP17, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn VP17.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn VP17. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn VP17 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
