Instruction/ maintenance manual of the product TCD-2 Bunn
Go to page of 18
BUNN-O-MA TIC CORPORA TION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 PHONE: (217) 529-6601 F AX: (217) 529-6644 www .bunnomatic.com INST ALLA TION & OPERA TING MANUAL With ILLUSTRA TED P ARTS NOTE : LIFT THE DISPENSER USING THE HANDLES ONL Y .
BUNN-O-MA TIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) All equipment other than as specified below: 2 years parts and 1 year labor . 2) Electronic circuit and/or control boards: parts and labor for 3 years.
INTRODUCTION These dispensers are designed to mix liquid tea concentrate with water to produce iced tea by the glass or pitcher . The concentrate can be stored either inside the dispenser , or outside with a hose connection to the dispenser . The dispenser must be placed on a sturdy counter or shelf.
4 1. Remove dispenser from the box and place on a sturdy , level counter . 2. Remove the brass cap and any packing material from the end of the water inlet fitting located on the rear of the dispenser . 3. Attach the 1/4" "L" tube and water strainer to the water inlet fitting, tighten all flare nuts.
5 Daily Cleaning: 1. T urn handle on rear of dispenser to shut off the water supply . 2. Open the faucet to relieve pressure in the system. 3. Since the bag connector(s) have an internal shut off valve, it will be necessar y to prop the valve open during clean- ing.
6 TCD-1 TCD-2 1 5 6 7 8 9 2 3 4 14 13 12 11 10 15 16 17 10 18 19 21 23 48 49 24 23 25 26 27 28 29 30 31 32 33 35 36 37 46 23 47 .375" BIB Adapter 60 61 62 61 Concentrate Bottle T ube P3457.
ITEM P ART NO. QTY . DESCRIPTION 7 * Indicates the part number listed is for reference only . See DESCRIPTION for possible ser vice replacement. 1 23820.1000 1 Water Strainer Assy (Includes items 2 thru 4) 2 22249.0000 1 Cap, Water Strainer 3 23721.0000 1 Screen 4 23819.
8 TCD-1 TCD-2 REPLACEMENT P ARTS (TCD-1) P3457.60 34106.1 112106 (continued) 1 5 6 7 8 9 2 3 4 14 13 12 11 10 15 16 17 10 18 19 21 23 48 49 24 23 25 26 27 28 29 30 31 32 33 35 36 37 46 23 47 .
ITEM P ART NO. QTY . DESCRIPTION 9 * Indicates the part number listed is for reference only . See DESCRIPTION for possible ser vice replacement. 27 37786.0001 2 Plate, Fitting Retainer 01360.0002 2 Screw , Plascrew #6 x .375" 28 32631.0000 1 Fitting, Barb .
10 TCD-1 TCD-2 REPLACEMENT P ARTS (TCD-1) P3457.60 34106.1 112106 (continued) 1 5 6 7 8 9 2 3 4 14 13 12 11 10 15 16 17 10 18 19 21 23 48 49 24 23 25 26 27 28 29 30 31 32 33 35 36 37 46 23 47 .
ITEM P ART NO. QTY . DESCRIPTION 11 * Indicates the part number listed is for reference only . See DESCRIPTION for possible ser vice replacement. REPLACEMENT P ARTS (TCD-1) 34106.1 082506 54 03207.0004 1 Drip T ray 55 38465.0000 1 Decal, Pressure Regulator 56 38466.
12 TCD-1 TCD-2 REPLACEMENT P ARTS (TCD-2) 1 5 6 7 8 9 2 3 4 14 13 12 11 10 15 16 17 10 18 19 20 51 22 21 26 27 28 29 30 31 33 32 34 35 36 38 39 41 42 43 44 45 46 48 47 40 62 49 51 54 .375" BIB Adapter 50 51 52 51 66 Bag Divider P3462.60 24 23 34106.
ITEM P ART NO. QTY . DESCRIPTION 13 * Indicates the part number listed is for reference only . See DESCRIPTION for possible ser vice replacement. 1 23820.1000 1 Water Strainer Assy (Includes items 2 thru 4) 2 22249.0000 1 Cap, Water Strainer 3 23721.0000 1 Screen 4 23819.
14 TCD-1 TCD-2 P3462.60 REPLACEMENT P ARTS (TCD-2) 34106.1 112106 (continued) 1 5 6 7 8 9 2 3 4 14 13 12 11 10 15 16 17 10 18 19 20 51 22 21 26 27 28 29 30 31 33 32 34 35 36 38 39 41 42 43 44 45 46 48 47 40 62 49 51 54 .
ITEM P ART NO. QTY . DESCRIPTION 15 * Indicates the part number listed is for reference only . See DESCRIPTION for possible ser vice replacement. 30 37786.0001 2 Plate, Fitting Retainer 38044.0000 2 Screw , Plastite #6 x .375" 31 32631.0000 1 Fitting, Barb .
16 TCD-1 TCD-2 P3462.60 REPLACEMENT P ARTS (TCD-2) 34106.1 112106 (continued) 1 5 6 7 8 9 2 3 4 14 13 12 11 10 15 16 17 10 18 19 20 51 22 21 26 27 28 29 30 31 33 32 34 35 36 38 39 41 42 43 44 45 46 48 47 40 62 49 51 54 .
ITEM P ART NO. QTY . DESCRIPTION 17 * Indicates the part number listed is for reference only . See DESCRIPTION for possible ser vice replacement. REPLACEMENT P ARTS (TCD-2) 34106.1 082506 58 00656.0000 1 Decal, Plumbing Code 59 38130.0000 1 Decal, Faucet Under Pressure 60 38465.
18 34106.1 020306 ICED TEA DECAL PLACEMENT APPRO X. 5“ PLASTIC BODY F AUCET COMP ARISON If you have a plastic body faucet of this design, you must order a complete new plastic faucet.
An important point after buying a device Bunn TCD-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn TCD-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn TCD-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn TCD-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn TCD-2 will certainly help you make a decision on the purchase.
If you already are a holder of Bunn TCD-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn TCD-2.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn TCD-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn TCD-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center