Instruction/ maintenance manual of the product RWS1A Bunn
Go to page of 2
RWS1, RWS1A, & RWS1B WARMERS ( s ⁄ n RW10002448 and up) INTRODUCTION This portable warmer keeps one BUNN ® Safety-Fresh ® server of coffee at the perfect temperature. ELECTRICAL REQUIREMENTS Model RWS1 has attached cordset and requires 2-wire grounded service rated 120 volts ac, single phase.
L1 BLU SCHEMATIC WIRING DIAGRAM RWS1A GRN/YEL L2 RED RED BLK 230 VOLTS A C 2 WIRE L1 BLU WARMER WARMER SCHEMATIC WIRING DIAGRAM RWS1 & RWS1B GREEN N WHI WHI BLK 10804.0000A 3/94 © 1994 BUNN-O-MATIC CORPORATION 100 or 120 VOLTS A C 2 WIRE AUXILIARY OUTLET 200 WATT MAXIMUM GREEN WHI BLK 10804.
An important point after buying a device Bunn RWS1A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn RWS1A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn RWS1A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn RWS1A you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn RWS1A will certainly help you make a decision on the purchase.
If you already are a holder of Bunn RWS1A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn RWS1A.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn RWS1A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn RWS1A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
