Instruction/ maintenance manual of the product IMIX-4 Bunn
Go to page of 14
IMIX ® -3 IMIX ® -4 IMIX ® -5 INST ALLA TION & OPERA TING GUIDE BUNN-O-MA TIC CORPORA TION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 PHONE: (217) 529-6601 F AX: (217) 529-6644 T o e.
2 37510 072513 BUNN-O-MA TIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal ser vers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor .
3 USER NOTICES The notices on this dispenser should be kept in good condition. Replace unreadable or damaged labels. 00831.0000 IMIX-5 (Self Serve) 28328.0010 37510 072513 RELEASE BUTT ON WHEN CUP IS 3/4 FULL H O T L I Q U I D PLACE CUP HERE PLACE CUP HERE PLACE CUP HERE PLACE CUP HERE IMIX-4 (Self Serve) 28328.
4 INITIAL SET -UP 1. Apply the four non-skid pads from the parts box to the bottom of the legs. 2. Remove the drip tray assembly , drip tray bracket, and splash panel assembly from the parts box.
5 PLUMBING REQUIREMENTS This dispenser must be connected to a cold water system with operating pressure between 20 and 90 psi (138 to 620 kPa) from a 1⁄2” or larger supply line. A shut-off valve should be installed in the line before the dispenser .
6 RINSE TIMER The dispenser is shipped from the factory with the rinse timer disabled. T o enable the rinse timer , refer to Programming the Dispenser and select yes in the “Rinse Alarm ?” screen; set timer to the desired time and exit the programming mode.
7 CLEANING The use of a damp cloth rinsed in any mild, non-abrasive, liquid detergent is recommended for cleaning all sur - faces on Bunn-O-Matic equipment.
8 HOPPER DISPENSE RA TE OF PRODUCT The hopper dispense rates are preset at the factor y . With 22 tooth gear and auger wire, the preset dispense rate is approximately 3 to 5 grams per second. With 30 tooth gear and auger wire, the preset dispense rate is approximately 5 to 7 grams per second.
9 Adjust tank temperature (190° F maximum) Adjust minimum tank ready temper - ature for lockout (185° maximum) Adjust hopper motor speed for station selected T ANK TEMP XXX° (-) EXIT (+) READY TEMP.
10 A. Enter program mode and advance to next menu B. Increment display value positive C. Exit program mode D. Increment display value negative E. Return to previous menu and interrupt dispense PORTION.
11 PROGRAMMING CUP SIZES - Portion Control Models The cup size can be programmed in portion control models by “EXAMPLE” or “TIME”. Programming by EX- AMPLE is manually pressing desired dispense button, then releasing when the desired cup size is attained.
12 DISABLE MESSAGES ? NO EXIT YES Press and release right switch (advance to next menu), “T ANK TEMP XXX°” appears on screen. PROGRAMMING THE DISPENSER (cont.
13 XX° CAL XX° (-) T ank T emp (+) PROGRAMMING THE DISPENSER (cont.) DRINK STRENGTH 1 (-) XX (+) PRESS DISPENSE TO CHECK T ASTE T ASTE 1 OK ? NO YES SET FLA VOR 1 BY T ASTE RECIPE ENTER RECIPE # #.
14 PROGRAMMING THE DISPENSER (cont.) LOW POWDER LOCK ? NO EXIT YES DISPENSE LOCKOUT NO EXIT YES RINSE ALARM ? NO EXIT YES HEAD 1 DISABLE ? NO EXIT YES SET P ASSWORD ? (-) XXXX (+) Returns to (G) (page.
An important point after buying a device Bunn IMIX-4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn IMIX-4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn IMIX-4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn IMIX-4 you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn IMIX-4 will certainly help you make a decision on the purchase.
If you already are a holder of Bunn IMIX-4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn IMIX-4.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn IMIX-4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn IMIX-4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
