Instruction/ maintenance manual of the product HW2 Bunn
Go to page of 4
HW2 HW2A BU N N ® BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 PHONE: (217) 529-6601 FAX: (217) 529-6644 10052.0000 6/00 ©1987 Bunn-O-Matic Corporation INSTALLATION & OPERATING INSTRUCTIONS INTRODUCTION This equipment heats and dispenses water on demand for beverages and cooking purposes.
2 00831.0000 00657.0000 USER NOTICES The notices on this dispenser should be kept in good condition. Replace unreadable or damaged labels. 10052 060700.
3 ELECTRICAL REQUIREMENTS CAUTION - The dispenser must be unplugged until specified in Initial Set-Up. The Model HW2 has an attached cordset and requires 2-wire, grounded service rated 120V ac, 15 amp, single phase, 60 Hz. The Model Hw2A requires 2-wire grounded service rated 240V ac, 8 amp, single phase, 50 Hz.
4 1700W TANK HEATER 14 LIMIT THERMOSTAT BLK 10261.0000E 5/98 © 1987 BUNN-O-MATIC CORPORATION SCHEMATIC WIRING DIAGRAM HW2 L1 N BLK BLK WHI SOL GREEN 3 2 BLU/BLK WHI WHI BLK BLK LIQUID LEVEL BOARD SAFETY SW (PROBE) P N K WHI WHI WHI WHI KEEP WARM HEATER 40W SW.
An important point after buying a device Bunn HW2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn HW2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn HW2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn HW2 you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn HW2 will certainly help you make a decision on the purchase.
If you already are a holder of Bunn HW2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn HW2.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn HW2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn HW2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center