Instruction/ maintenance manual of the product HC-3 Bunn
Go to page of 6
BU N N ® HC-1 HC-2 HC-3 OPERA TING & SER VICE MANU AL BUNN-O-MA TIC CORPORA TION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 PHONE: (217) 529-6601 FAX: (217) 529-6644 26530.
2 INTRODUCTION This equipment dispenses hot powdered beverages on demand. It has one, two, or three hoppers. The two and three hopper models may also dispense cold powdered beverages from their left dispense station. It is for indoor use only on a sturdy counter or shelf.
3 00656.0000 12368.0001 00831.0000 INITIAL SET-UP 1. Locate the drip tray assembly beneath the dispenser nested in the packing material. 2. Remove the cup locator plate from the drip tray and the drip tray cover and set them aside. 3. Remove the water strainer assembly from the drip tray and set it aside.
4 PLUMBING REQUIREMENTS This dispenser must be connected to a COLD WATER system with operating pressure between 20 and 90 psi from a 1 ⁄ 2 " or larger supply line. A shut-off valve should be installed in the line before the dispenser. Install a regulator in the line when pressure is greater than 90 psi to reduce it to 50 psi.
5 DISPENSER USE 1. Simply place a cup on the drip tray in front of the desired dispensing button. 2. Press the button to whip and dispense the beverage. 3. Release the button when the cup is approximately 2 / 3 full and allow the mixing chamber to drain.
6.
An important point after buying a device Bunn HC-3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn HC-3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn HC-3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn HC-3 you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn HC-3 will certainly help you make a decision on the purchase.
If you already are a holder of Bunn HC-3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn HC-3.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn HC-3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn HC-3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
