Instruction/ maintenance manual of the product G9-2 HD-S Bunn
Go to page of 8
PE R SONAL INJURY HAZARD. KEEP FINGERS AND FOREIGN OBJECTS OUT OF HOPPER OR CHUTE OPENING. CAUTION PERSONA L INJURY HAZARD. KEEP FINGERS AND FOREIGN OBJECTS OUT OF HOPPER OR CHUTE OPENING.
2 10218 021513 BUNN-O-MA TIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal ser vers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor .
3 USER NOTICES Carefully read and follow all notices on the grinder and in this manual. They were written for your protection. All notices on the grinder are to be kept in good condition.
4 OPERA TING CONTROLS Off/On/Start Switch OFF - (upper position) Switching to this position stops all operation of the grinder . ON - (middle position) The switch will return to this position after a grind cycle has begun and will remain in this position after grinding has ceased.
5 INITIAL SET -UP 1. Open the top lid. Clear all foreign objects and shipping material from the hopper compartment and the entrance to the grind chamber . 2. Remove the lower front inspection panel. 3. Plug-in the grinder . 4. Select either the right or left hopper with the selector switch.
6 COFFEE GRINDING STEP 1 STEP 2 STEP 3 STEP 4 STEPS 5 & 6 1. Visually inspect the selected hopper for an ample supply of whole bean coffee. 2. Place a paper filter into the brew funnel. The filter must not be folded-over or tilted to one side. 3.
7 ADJUSTMENTS The grind can be set from ver y fine to very coarse. The amount may be adjusted for use in most commercial coffee brewers. The following procedures should be used to make adjustments. A change in the burr adjustment will also change the amount dispensed.
8 APPROXIMA TE TIMER SETTINGS IN SECONDS Weight Fine Drip Regular (ounces) (7*) (8*) (12*) 1.5 0.5 0.5 0.5 1.75 0.7 0.6 0.6 2.0 1.0 0.8 0.8 2.25 1.4 1.4 1.2 2.5 1.9 1.8 1.6 2.75 2.4 2.2 2.0 3.0 2.9 2.7 2.5 3.25 3.3 3.1 2.9 4.0 4.8 4.4 4.0 6.0 8.6 7.9 7.
An important point after buying a device Bunn G9-2 HD-S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn G9-2 HD-S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn G9-2 HD-S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn G9-2 HD-S you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn G9-2 HD-S will certainly help you make a decision on the purchase.
If you already are a holder of Bunn G9-2 HD-S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn G9-2 HD-S.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn G9-2 HD-S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn G9-2 HD-S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
