Instruction/ maintenance manual of the product FMD DBC-3 4-CUP Bunn
Go to page of 4
BU N N ® OPERA TING & SER VICE MANU AL ADDENDUM BUNN-O-MA TIC CORPORA TION OF CANAD A L TD . 280 INDUSTRIAL P ARKWA Y SOUTH AURORA, ONT ARIO. L4G 3T9 PHONE: (905) 841-2866 F AX: (905) 841-2775 29215.
2 DISPENSER USE 1. Simply place a cup on the drip tray beneath the desired dispensing tip. 2. To select a mocha dispense, momentarily press the “MOCHA” switch at the appropriate position. Note that the “MOCHA” lights when mocha is selected. For non-mocha, dispenses, skip to step 3.
3 3. Increasing / Decreasing the Hopper Dispense Rate: a. Enter the program mode on the position you want to program (see step 1.a.) b. Place the Rinse/Run switch in the “Rinse” position.
4 7. Password: The password is to be used to prevent unauthorized entering of the program modes. The password is preset at the factory to 0 (no password.) a. To enter the password programming, press and hold any two dispense size switches on any one of the positions for 10 seconds.
An important point after buying a device Bunn FMD DBC-3 4-CUP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn FMD DBC-3 4-CUP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn FMD DBC-3 4-CUP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn FMD DBC-3 4-CUP you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn FMD DBC-3 4-CUP will certainly help you make a decision on the purchase.
If you already are a holder of Bunn FMD DBC-3 4-CUP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn FMD DBC-3 4-CUP.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn FMD DBC-3 4-CUP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn FMD DBC-3 4-CUP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
