Instruction/ maintenance manual of the product Dual SH Bunn
Go to page of 12
BUNN-O-MA TIC CORPORA TION POST OFFICE BOX 3227 SPRINGFIELD, ILLINOIS 62708-3227 TELEPHONE: (217) 529-6601 F AX: (217) 529-6644 36529.0000F 08/06 ©2004 Bunn-O-Matic Corporation www .
2 CONTENTS User Notices ................................................................................................................................................................... 3 Electrical Requirements .....................................
3 USER NOTICES Carefully read and follow all notices on the grinder and in this manual. They were written for your protection. All notices on the grinder are to be kept in good condition.
4 INITIAL SET -UP & PROGRAMMING 1. Grinder will not operate unless a hopper with a coffee name programmed into the chip is in place on the grinder . 2. Refer to Setup Menu “NAME HOPPER” to program hopper chip. 3. Remove top lid. Clear all foreign objects and shipping material from the hopper compartment.
5 ADJUSTMENTS The grind can be set from very fine to very coarse. The amount may be adjusted for use in most commer cial coffee brewers. The following procedures should be used to make adjustments. A change in the burr adjustment will also change the amount dispensed.
6 PRESS AND HOLD RIGHT HIDDEN BUTTON TO ENTER THE SET -UP MENUS PRESSING EITHER "PREV" OR "NEXT" WILL SCROLL TO ANOTHER COFFEE FLAVOR "COFFEE NAME" PREV SA VE NEXT WHICH .
7 APPROXIMA TE TIMER SETTINGS IN SECONDS + Weight Fine Drip Regular (ounces) (7*) (8*) (12*) 1.5 0.5 0.5 0.5 1.75 0.7 0.6 0.6 2.0 1.0 0.8 0.8 2.25 1.4 1.4 1.2 2.5 1.9 1.8 1.6 2.75 2.4 2.2 2.0 3.0 2.9 2.7 2.5 3.25 3.3 3.1 2.9 4.0 4.8 4.4 4.0 6.0 8.6 7.
8 PRESS AND HOLD RIGHT HIDDEN BUTTON TO ENTER THE SET -UP MENUS PRESSING THE RIGHT HIDDEN BUTTON THREE TIMES IN THIS MENU WILL T AKE YOU TO THE "SERVICE TOOLS" MENU PRESSING THE UPPER RIGHT .
9 PRESS CENTER HIDDEN BUTTON TO SCROLL TO NEXT FREQUENCY TEST PRESSING ANY BUTTON EXCEPT THE RIGHT HIDDEN BUTTON WILL DISPLA Y THE BUTTON NAME ON THE SCREEN EXIT SET UP MENUS EXIT SET UP MENUS EXIT SE.
10 NUMBER NAME NUMBER NAME 1 Regular 15 Jamaica Blue Mtn 2 Decaf 16 Guatemalan 3 Colombian 17 Light Roast 4 Colombia Supremo 18 Dark Roast 5 Costa Rican 19 Expresso 6 Ethiopian 20 Amaretto 7 Kona 21 H.
11 COMMUNICA TING WITH COFFEE BREWER (Continued) Entering A Coffee Name Using A Recipe Card Press the STOP button and place the chip portion of the card under the sensor coil on the front of the grinder . The LCD display will enter the RECIPE CARD menu.
12 SCHEMA TIC WIRING DIAGRAM MHG N B L K W H I L1 RIGHT GA TE LEFT HOPPER SENSOR LIMIT THERMOST AT LIMIT THERMOST AT WHI/YEL WHI/YEL WHI/GRN WHI/ORN WHI/ORN YEL ORN YEL ORN BLK WHI WHI WHI WHI J5-5 J5.
An important point after buying a device Bunn Dual SH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn Dual SH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn Dual SH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn Dual SH you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn Dual SH will certainly help you make a decision on the purchase.
If you already are a holder of Bunn Dual SH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn Dual SH.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn Dual SH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn Dual SH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
