Instruction/ maintenance manual of the product AutoPOD Bunn
Go to page of 3
AutoPOD™ Common Issues Pressure T oo High Error Message Model: AutoPOD™ Common Cause(s): incoming water pressure pushing or exceeding 90 psi or the weight an grind of the product T roubleshooting: Check the incoming water pressure and check the weight and grind of the product.
Heating T oo Long Error Message Model: AutoPOD™ and AutoPOD™ with Booster Pump Common Cause(s): Heater relay on greater than 6 minutes. T roubleshooting: Check for open element, limit thermostat and heater relay coil. If components check good, the main control has a triac on the board that supplies the output voltage to the tank elements.
Slow Brewing Common Cause(s): too low incoming and uctuating water pressure T roubleshooting: Check the incoming water pressure. Repair: Source new water supply to achieve recommended water pressure to the machine. If the location cannot support recommended water pressure then consider the AutoPOD™ with Booster Pump.
An important point after buying a device Bunn AutoPOD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn AutoPOD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn AutoPOD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn AutoPOD you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn AutoPOD will certainly help you make a decision on the purchase.
If you already are a holder of Bunn AutoPOD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn AutoPOD.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn AutoPOD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn AutoPOD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
