Instruction/ maintenance manual of the product 411701 Bunn
Go to page of 9
PROGRAMMING MANUAL BUNN-O-MA TIC CORPORA TION POST OFFICE BO X 3227 SPRINGFIELD , ILLINOIS 62708-3227 PHONE: (217) 529-6601 F AX: (217) 529-6644 41170.
Page 2 41170 030912 BUNN-O-MA TIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal ser vers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor .
Page 3 411701 061308 CONTENTS LOCKOUT SWITCH .............................................................................................4 PROGRAMMING SWITCHES...............................................................................5 PROGRAMMING .
Page 4 ADJUSTMENTS & PROGRAMMING PROGRAMMING LOCKOUT SWITCH PROGRAMMING THE BREWER The programming of the brewer is divided into two levels. Brewing adjustments are in Level 1. Ser vice func- tions are accessed in Level 2. The following function screens are in order of appearance.
Page 5 AutoPOD BREWER MAIN SCREEN PROGRAM FUNCTIONS AutoPOD B HIDDEN SWITCH Press until display reads "BREW LOCKOUT" Press/hold to exit program SMALL BREW Step backwards through screens L LL L BR BR E E Prevents brewing if the water temperature is less than the "SET READY" temperature.
Page 6 BREW TYPE (A/B) ( T ea/Coffee) T ea setting provides half the "purge" pressure as coffee at the end of brew cycle. BREW TYPE A TEA DONE COFFEE BREW OZ A: 8.0 (-) DONE (+) BREW METER A: 2 - + BREW OZ. (A/B) ( 1-16) Adjust brew volume. BREW METER (A/B) ( 1-5) Simplifi ed pulse brew adjustment.
Page 7 EXTERNAL RELA Y Main control board outputs 12vdc to activate external relay . The N.O. contact then closes to provide line voltage to the heater in HOT WA TER T ANK. EXTERNAL RELA Y ON NEXT OFF INDEX MOTOR DUMP runs the pod holder back to the pod ejection position.
Page 8 F ACTOR Y DEF AUL TS NO YES AutoPOD BREWER VERSION xx.xx TEST SWITCHES allows testing of the membrane switches. TEST SWITCHES ? NO YES AIR PUMP Activates the air pump motor for the brew tank. AIR PUMP ON NEXT OFF WA TER INLET Activates the water inlet valve for the brew tank, and fl ow meter count.
Page 9 411701 061308.
An important point after buying a device Bunn 411701 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn 411701 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn 411701 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn 411701 you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn 411701 will certainly help you make a decision on the purchase.
If you already are a holder of Bunn 411701, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn 411701.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn 411701. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn 411701 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
