Instruction/ maintenance manual of the product 41170.0001A Bunn
Go to page of 9
PROGRAMMING MANUAL BUNN-O-MA TIC CORPORA TION POST OFFICE BO X 3227 SPRINGFIELD , ILLINOIS 62708-3227 PHONE: (217) 529-6601 F AX: (217) 529-6644 41170.
Page 2 41170.1 030912 BUNN-O-MA TIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCP/MCA pod brewers thermal ser vers and Thermofresh servers (mechanical and digital)- 1 year parts and 1 year labor .
Page 3 41170.1 050312 CONTENTS LOCKOUT SWITCH .............................................................................................4 PROGRAMMING SWITCHES...............................................................................5 PROGRAMMING .
Page 4 ADJUSTMENTS & PROGRAMMING PROGRAMMING LOCKOUT SWITCH PROGRAMMING THE BREWER The programming of the brewer is divided into two levels. Brewing adjustments are in Level 1. Ser vice func- tions are accessed in Level 2. The following function screens are in order of appearance.
Page 5 AutoPOD BREWER MAIN SCREEN PROGRAM FUNCTIONS HIDDEN SWITCH Press until display reads "BREW LOCKOUT" Press/hold to exit program SMALL BREW Step backwards through screens Prevents brewing if the water temperature is less than the "SET READY" temperature.
Page 6 BREW LOCKOUT (YES/NO) Setting to "YES" only allows brewing at or above the "SET READY" temp screen. BREW LOCKOUT ? NO DONE YES BREW OZ A: 8.0 (-) DONE (+) BREW METER A: 2 - + BREW OZ. (LARGE) ( 1-16) Adjust brew volume for "LARGE" button.
Page 7 Y ou can set this to "DOUBLE" if you experience certain types of pods that do not reliably eject on single. NUMBER OF EJECTS SINGLE DOUBLE Number of pulses per ounce calculated during flow calibration.
Page 8 T ANK HEA TER RELA Y Activates the triac on the main control board for the tank heater . ON NEXT OFF TEST SWITCHES allows testing of the membrane switches. TEST SWITCHES ? NO YES AIR PUMP Activates the air pump motor for the brew tank. AIR PUMP ON NEXT OFF WA TER INLET Activates the water inlet valve for the brew tank, and flow meter count.
Page 9 200˚ CAL --> 200˚ (-) BrewT ank (+) Insert an accurate thermometer approximately 7-8˝ into tank. Adjust the number on the right with +/- until it matches reading of thermometer . Press the hidden program button. 41170.1 050312 PROGRAM FUNCTIONS F ACTOR Y DEF AUL TS NO YES AutoPOD BREWER VERSION xx.
An important point after buying a device Bunn 41170.0001A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn 41170.0001A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn 41170.0001A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn 41170.0001A you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn 41170.0001A will certainly help you make a decision on the purchase.
If you already are a holder of Bunn 41170.0001A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn 41170.0001A.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn 41170.0001A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn 41170.0001A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
