Instruction/ maintenance manual of the product 2 Bunn
Go to page of 3
3. T wist the Whipper Chamber clockwise and pull it off the Whipper Chamber Receptacle. 4. Pull the Frother off the Motor Shaft. Notice the flat keyway on the shaft and the matching keyway inside the Frother . It is important that these two keyways are lined up when reassembling.
25. Push down until the Hopper Lock Plunger snaps into place. 18. Place all parts in a clean sink with mild hot water (120 ° F) and sanitizer solution. Allow parts to soak for at least 5 minutes. Carefully wash all components with a clean wash cloth in the hot water and sanitizer solution.
26. Slide P AF assembly forward. 27. Reassemble and in- stall all P AF parts. Close Door . 28. Position the Faucet Seal and Return Spring in the Faucet Valve. 29. Slide the Faucet V alve assembly into place on the Hopper . 30. Press down on the V alve to compress the Spring.
An important point after buying a device Bunn 2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bunn 2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bunn 2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bunn 2 you will learn all the available features of the product, as well as information on its operation. The information that you get Bunn 2 will certainly help you make a decision on the purchase.
If you already are a holder of Bunn 2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bunn 2.
However, one of the most important roles played by the user manual is to help in solving problems with Bunn 2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bunn 2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
