Instruction/ maintenance manual of the product 1 ADTRAN
Go to page of 2
Technical Supp ort 1-888-4ADTRAN (1 -888-423-8726) Configuring the T ot al Access 900 Series DSX-1 Interface Quick Configuration Guide 61210916L1-4 2.4B March 2006 The DSX-1 interface is located on the rear of the T otal Access 900 Series produ cts. It is labeled DSX-1 T1 0/1 on the ADSL units and DSX-1 T1 0/2 on all other units.
2 Technical Support 1-888-4 ADTR AN (1-888-423-8726) 61210916L1-4 2.4B 9. Enter clock source internal to set the system clock source to internal timing. 10. Enter voice trunk T03 type t1-rbs supervision wink role network to creat e and set up this trunk group for use with T1-RBS (DSX-1) inte rface.
An important point after buying a device ADTRAN 1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ADTRAN 1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ADTRAN 1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ADTRAN 1 you will learn all the available features of the product, as well as information on its operation. The information that you get ADTRAN 1 will certainly help you make a decision on the purchase.
If you already are a holder of ADTRAN 1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ADTRAN 1.
However, one of the most important roles played by the user manual is to help in solving problems with ADTRAN 1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ADTRAN 1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
