Instruction/ maintenance manual of the product WMR-G54 Buffalo Technology
Go to page of 20
54Mbp s/1 1Mbp s Wireless ADSL Modem Router WMR-G54 User ’ s Guide.
2.
T able of Content s Introduction 3 A Look at the Hardware 3 Front Panel 4 B a c k P a n e l 4 Hardware Installation 5 Configure the Router for the first time 5 Configuring IP Settings on Y our Compute.
following table defines the behavior for each LED: LED Represent s Activity / S tatus Power Power The Power LED will light up when the device is powered on. USB USB Connection - S teady on – USB is connected to a host PC. - Blinking – Dat a is being transferred over the USB connection.
cable to the USB port an d connect the other end to the computer . Reset Use an object, such as a stretched p aper clip, to press the button for at l east 3 seconds. LAN 1, 2, 3, 4 LED will light up for a short time and then be off. Y ou can release the button now to reset the device to its factory-default settings.
For Windows 2000/Windows XP 1. Right-click on My Network Places icon on the desktop and then click Properties in menu. 2. Double-click Local Area Connection icon and then click Properties button. 3. Scroll down to highlight TCP/IP (y our netw ork card) and then click Properties button.
Internet Service Provider (ISP). The ADSL Modem Router can be configured with your web browser . The product provides a very easy and user-friendly interface for configuration. 1. Open your web browser . En ter http://192.168.1.1 in the web browser ’s address field, and press the enter key .
II. Quick Setup The Quick Setup will guide you through the steps necessary to configure your DSL Router . III. Configure W AN (DSL) Connectivity 1. Click the Advanced Setup tab on the left frame. 2. Click the WA N tab on the lef t frame. A W AN Setup pag e will appear on the right frame.
UBR With PCR, CBR, Non Realtime VBR, and Realtime VBR. 4. A Connection T ype page will appear . There are several ways for the device to have a public IP address and then to access the Internet. Y ou have to check with your ISP about which way is adopted.
2. In the PPP Username and Pa ssword page, enter the user name and password supplied by your ISP in PPP Username and PPP Passw ord fields. 3. Check the box Disconnect if no activity if you want to enable the function of automatic disconnection. It will auto-disconnect the ADSL Modem Router when there is no activity on the line for a period of time.
Allows only one PC on the LAN The public IP address assigned by the remote using the PPP/IPCP protocol is actually not used on the W AN PPP interface.
7. The W AN Setup page will appear . Click the Save/Reb oot button. The router will reboot automatically with the new settings in effect. 8. Close your Web UI window and wait for about 2 minutes before reopening your web browser .
IP over A TM (IPoA) 1. Select the IP over A TM (IPoA) radio button and scroll down to select the appropriate Encap sulation Mode . There are two encapsulation types available: LLC/Snap-Routing and VC/MUX. Then click Next button. 2. DHCP is n ot supported over IpoA.
3. The Network Address T ranslation Settings page will appear . If you want to enable the NA T function, check the box Enable NA T . If NA T is enabled, it will display a NA T submenu on the left p anel after the unit reboots. NA T occurs when multiple IP addresses on a private LAN are converted to one public address.
8. The W AN Setup – Summary page displays a summary of all W AN setting profiles. Click the Save button to save all the settings. 9. The W AN Setup page will appear . Click the Save/Reb oot button. The router will reboot automatically with the new settings in effect.
2. Check the box Enable Bridge Service . Enter a desired name in the Service Name field. It is used to identify the service. Then click the Next butto n. The LAN IP in bridge operating mode is needed for local users to manage the ADSL Modem Router . And no IP address is needed for the W AN in bridge mode.
4. The W AN Setup page will appear . Click the Save/Reb oot button. The router will reboot automatically with the new settings in effect. 5. Close your Web UI window and wait for about 2 minutes before reopening your web browser .
IV . Configure Wireless Connectivity 1. Click the Wireless tab on the left frame. A Wireless - Basic page will appear on the right frame. Check the box Enable Wireless . 2. Check the box Hide Access Point and then your WMR-G54 will not res pond when a ping is sent by any user on the Internet.
Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove pr esu.
Buffalo T echnology Europe Buffalo T echnology UK 176, Buckingham Avenue Slough, Berkshire, SL1 4RD United Kingdom T el. +44 (0) 1753 555000 Fax. +44 (0) 1753 535420 Buffalo T echnology Ireland Free Zone East Shannon Co. Clare Ireland T el. +353 61 708090 Fax.
An important point after buying a device Buffalo Technology WMR-G54 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Buffalo Technology WMR-G54 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Buffalo Technology WMR-G54 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Buffalo Technology WMR-G54 you will learn all the available features of the product, as well as information on its operation. The information that you get Buffalo Technology WMR-G54 will certainly help you make a decision on the purchase.
If you already are a holder of Buffalo Technology WMR-G54, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Buffalo Technology WMR-G54.
However, one of the most important roles played by the user manual is to help in solving problems with Buffalo Technology WMR-G54. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Buffalo Technology WMR-G54 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
