Instruction/ maintenance manual of the product HD-HGLAN Buffalo Technology
Go to page of 9
Unpacking and Setup Open the shipping carton of LinkStation and carefully unpack its contents. The carton should contain the following items: Main unit (LinkStation) 1 LinkStation Base Plate 1 Base Ru.
2 Step 1: Connect your Cables Plug LinkStation’s power cord into the back of LinkStation. Plug the other end of the power code into a power outlet. Then, plug the included Ethernet Cable into the Ethernet port on the back of LinkStation.
3 Check the LINK/ACT light on the front of the LinkStation. If it is lit, then LinkStation is connected properly; please turn to Page 4 to continue setup. If it is not lit, continue to the next step. V erify that the LINK/ACT light on the front of LinkStation is lit (see Step 4 ’s picture).
4 Insert the LinkNavigator CD into the PC’s CD-ROM drive. Depending on the PC’s con fi guration, the EasySetup program may launch. If it does not automatically launch, manually launch it by pressing the ‘ Start ’ menu and selecting the ‘ Run.
5 This part of the program changes LinkStation’s IP Address. Check the box that states ‘ Acquire IP Address Automatically ’ . This will give LinkStation an IP Address from the network’s router/DHCP server . A static IP Address and gateway can also be set if preferred.
6 The LinkStation name will be required to access LinkStation. A friendly , easy name is recommended. Enter a suitable name in the ‘ LinkStation Name ’ fi eld. Feel free to use your fi rst or last name, a description of the data to be installed on LinkStation, or simply name it LinkStation.
7 Accessing LinkStation data is performed using the following steps: LinkStation’s ‘Root Directory’ will appear . Y ou will see all of the con fi gured shares. All users can read and write to all folders. T o setup security and password protection, please refer to the User Manual on the LinkNavigator CD-ROM.
8 T echnical Speci fi cations LAN Sta nda rd s : IEEE 8 02. 3u 100 BAS E- TX ; IEEE 8 02. 3 10 B AS E -T Tr a n s m i s s i o n Ty p e s : 1 000Mbp s/ 1 00Mb ps / 1 0Mbp s; (10 0 0 B A S E -T ) 8 B 1.
9 Buffalo Technology customers can obtain technical support using the following information: • Online Help: Available on the software CD enclosed with your purchase. • User Manual: Available on the Software CD enclosed with your purchase. • Web: www.
An important point after buying a device Buffalo Technology HD-HGLAN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Buffalo Technology HD-HGLAN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Buffalo Technology HD-HGLAN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Buffalo Technology HD-HGLAN you will learn all the available features of the product, as well as information on its operation. The information that you get Buffalo Technology HD-HGLAN will certainly help you make a decision on the purchase.
If you already are a holder of Buffalo Technology HD-HGLAN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Buffalo Technology HD-HGLAN.
However, one of the most important roles played by the user manual is to help in solving problems with Buffalo Technology HD-HGLAN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Buffalo Technology HD-HGLAN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
