Instruction/ maintenance manual of the product HD-HBU2 Buffalo Technology
Go to page of 8
Unpacking and Setup This section provides unpacking and setup information for DriveStation. Open the shipping carton of DriveStation and carefully unpack its contents.
2 DriveStation Setup Flip the power switch on the back of DriveStation to the OFF position. Plug DriveStation’s power cord into a power outlet. Then, connect the included USB cable into the USB port on the back of DriveStation. Connect the USB cable into the USB port on the computer or device you are adding the DriveStation to.
3 Flip the power switch on the back of the DriveStation to the ON position. In Windows 2000 and XP , the DriveStation will automatically install upon power-on. Open ‘My Computer ’ and the new drive will be present. By default it will pick the fi rst available drive letter and will be named ‘Local Disk’.
4 Insert the DriveNavigator CD into your CD-ROM Drive. Shortly thereafter the DriveNavigator Easy Setup program will launch. NOTE: If the DriveNavigator program does not launch, it can be launched by pressing on the ‘Start Menu’ and selecting the ‘Run’ option.
5 Flip the power switch on the back of the DriveStation to the ON position. Please refer to the User Manual on the LinkStation’s LinkNavigator CD for LinkStation USB Disk confi guration.
6 CAUTION: Be careful when you handle the HD-HBU2 chassis, because it may be hot to the touch. T echnical Specifi cations USB Standards: USB Specifi cation Rev . 2.0 Capacity: 80,120,160,250,300 GB Seek Time: Max. 1 1 milliseconds T ransmission Speed: Max.
7 T echnical Su p por t CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
8 BUFF ALO W ARRANTY ST A TEMENT Buffalo products come with a 2-year limited warranty from the date of purchase. Buffalo T echnology warrants in good operating condition for the warranty period. This warranty does not include non-Buffalo T echnology installed components.
An important point after buying a device Buffalo Technology HD-HBU2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Buffalo Technology HD-HBU2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Buffalo Technology HD-HBU2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Buffalo Technology HD-HBU2 you will learn all the available features of the product, as well as information on its operation. The information that you get Buffalo Technology HD-HBU2 will certainly help you make a decision on the purchase.
If you already are a holder of Buffalo Technology HD-HBU2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Buffalo Technology HD-HBU2.
However, one of the most important roles played by the user manual is to help in solving problems with Buffalo Technology HD-HBU2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Buffalo Technology HD-HBU2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
