Instruction/ maintenance manual of the product HS-DTGL/R5 Buffalo
Go to page of 9
Package Contents: Main Unit (TeraStation) Ethernet Cable Power Cable TeraNavigator Installation CD Quick Setup Guide (this manual) Warranty Card w w w .
2 Step 1: Connect your Cables Plug TeraStation’s power cord and Ethernet cable into the back of the TeraStation. Then, connect the power plug to a power outlet. Make sure that the power switch on the rear of the TeraStation is in the ON position, with the “I” symbol pressed down.
3 Check the LINK/ACT LED on the front of the TeraStation. If it’s lit, then your TeraStation is connected to your network. Please turn to page 4 to continue setup. If the LINK/ACT LED on the front of TeraStation is not lit, your TeraStation is not properly connected to your network.
4 Insert the TeraNavigator CD into a PC’s CD-ROM drive. If Setup doesn’t launch automatically, you can launch it manually by clicking Start , then Run... . When the Run dialog opens, type d:setup.exe (where “d” is the drive letter of the CD-ROM drive).
5 This login prompt will appear. The user name is admin . The password is password , until you change it. Press OK when nished. You’re now logged in. Bookmark this page in your browser for easy future access. For detailed explanations of each menu and setting, refer to your TeraStation manual, available on your TeraNavigator CD.
6 To access your TeraStation’s data, it’s convenient to have the TeraStation’s share (a folder you can store data in) mapped to a drive letter. Begin by clicking Start and then Run.
7 Congratulations! Your TeraStation is set up. Please see the TeraStation User Manual for more help and conguration options. Note on RAID arrays: TeraStation uses RAID (“Redundant Array of Independent Disks”) technology to control the four hard drives in your TeraStation.
8 T ec hn ic a l Suppo r t Buffalo Technology offers free technical support (24/7 Phone Support in North America, Email Support in Europe). Please see the back page of this quick start guide for the contact information. Please also visit the web site at http://www.
USA/Canada T echnical Support is available 24 hours a day , 7 days a week T oll-Free: 866-752-6210 email: info@buffalotech.com Europe T echnical Support is available between 9am-6pm (Monday-Thursday) (GMT) and 9am-4:30pm on Fridays. email: helpdesk@buffalo-technology .
An important point after buying a device Buffalo HS-DTGL/R5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Buffalo HS-DTGL/R5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Buffalo HS-DTGL/R5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Buffalo HS-DTGL/R5 you will learn all the available features of the product, as well as information on its operation. The information that you get Buffalo HS-DTGL/R5 will certainly help you make a decision on the purchase.
If you already are a holder of Buffalo HS-DTGL/R5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Buffalo HS-DTGL/R5.
However, one of the most important roles played by the user manual is to help in solving problems with Buffalo HS-DTGL/R5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Buffalo HS-DTGL/R5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
