Instruction/ maintenance manual of the product USBX-500 ADS Technologies
Go to page of 25
USB Port (PCI) Users Guide.
© 2001 ADS Technologies. All Rights Reserved First Edition: Revision 2.0 June 2001 Microsoft, MS-DOS, Windows, and Windows 95 and Windows 98 are registered trademarks of Microsoft Corporation. IBM is a registered trade- mark of International Business Machines, Inc.
4 Table of Contents A Letter from the President of ADS 5 Introduction 6 System Requirements 6 Package Contents 7 USB Port (PCI) Installation Guide 9 Installing the USB Port 10 Installing the Software .
5 “Making your Ordinary PC, Extraordinary” At ADS Technologies we bring the best and latest multimedia technology to your PC. Whether you want to watch TV on your PC, give a great multimedia compu.
6 Introduction Add a USB device to your PC! Instantly add USB peripherals to your PC. Never open your computer case again after you have your USB Port (PCI) installed. Say good-bye to confusing cables. The USB Port (Universal Serial Bus) allows you to instantly connect USB devices to your computer.
7 Note: If you did not receive one or more of the contents listed above inside the USB Port package, please contact the vendor you purchased it from or contact ADS directly.
8.
9.
10 In this section we will explain how to install your USB Port (PCI) into your PC. Next to each step there is a check box for your convenience. After each step has been completed, simply mark the check box and move to the next step.
11 Visually confirm that the USB Port will fit into the available slot you have chosen. r Step 5 r Locate an available PCI expansion slot. This will be in the area of your com- puter where other cards that look similar to the USB Port are installed.
12 Push the USB Port card firmly into the PCI slot. Apply pressure as needed until the edge connector is completely sealed. r Step 7 Once the USB Port is fully seated, the gold edge connectors are completely in the slot.
13 Mount the USB Port in place with a screw. Make sure the screw is firmly tightened so the USB Port does not slide out of its seated position. r Step 9 Replace the computers shell and screw it in place.
14 r Below is a picture of the dialog box that will notify you that Windows has detected your new hardware. Step 1 r Windows will then ask you to insert the Windows 98 CD-ROM. Once you have inserted the CD-ROM into the CD drive, left mouse click one time on the button that says “OK.
15 r If the default path to the Windows 98 directory on your CD-ROM is incorrect, you will see a dialog box as shown in the picture below. Simply type in the correct path to your CD-ROM and the word “WIN98” (example d:win98 ) drive and left mouse click one time on the button that says “OK.
16 Adding Additional USB Port Cards Initializing USB Devices When you first connect a USB device to your USB Port, Windows will automatically detect the presence of new hardware.
17.
18.
19 The ADS team has tried their hardest to make the USB Card as trouble free as possible. However we know problems may still arise or you may simply have questions. There are a couple of ways to contact ADS. Sales: Phone Number: 562-926-1928 Fax Number: 562-926-0518 E-Mail Address: sales@adstech.
20 Service and Warranty Se rv ice: If you require assistance with the installation, operation, or application of your ADS Technologies, Inc. product there are several options available to you as described in the technical support section of this manual.
21 6. Turn around time is approximately one week. A repaired or replace- ment product will be shipped back to you. Warran ty : This ADS Technologies, Inc.
22 FCC Information Federal communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
23.
.
.
ADS Technologies 12627 Hidden Creek Way Cerritos, CA, 90703 Corporate: 562.926.1928 Technical Support: 562.926.4338 Fax: 562.926.0518 Web Address: www.
An important point after buying a device ADS Technologies USBX-500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ADS Technologies USBX-500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ADS Technologies USBX-500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ADS Technologies USBX-500 you will learn all the available features of the product, as well as information on its operation. The information that you get ADS Technologies USBX-500 will certainly help you make a decision on the purchase.
If you already are a holder of ADS Technologies USBX-500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ADS Technologies USBX-500.
However, one of the most important roles played by the user manual is to help in solving problems with ADS Technologies USBX-500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ADS Technologies USBX-500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
