Instruction/ maintenance manual of the product 369RAN Bryant
Go to page of 12
NOTE: Read the entire instruction manual before starting the installation. TABLE OF CONTENTS SAFETY CONSIDERATIONS .....................................................1 INTRODUCTION ....................................................................
Understand the signal words DANGER, WARNING, and CAU- TION. These words are used with the safety-alert symbol. DAN- GER identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies a hazard which could result in personal injury or death.
CAUTION: For attic installation, it is important to keep insulation 12 in. or more away from any furnace open- ings. Some types of insulating materials may be combus- tibles. This furnace is approved for reduced clearances to combustible construction, therefore, it may be installed in a closet or similar enclosure.
In addition to air needed for combustion, process air shall be provided as required for: cooling of equipment or material, controlling dew point, heating, drying, oxidation or dilution, safety exhaust, and odor control.
3. If combustion air is taken from outdoors through horizontal ducts, the openings and ducts MUST have at least 1 sq in. of free area per 2000 Btuh of the total input for all equipment within the confined space.
9. The chimney must extend 3 ft above highest point where it passes through the roof of a building and at least 2 ft higher than any portion of a building within a horizontal distance of 10 ft. It shall also be extended at least 5 ft above highest connected equipment flue collar.
Remove burner by loosening mounting nuts and turn oil burner slightly counterclockwise to unlock the key hole burner flange. Prevent putting undue strain on burner wiring.
Fig. 3 — Wiring Diagram (036105) A00420 — 8 —.
Fig. 4 — Wiring Diagram (060120) A00419 — 9 —.
d. If purging takes longer than 15 sec and no flame has been established, burner stops. Push reset button on front of primary control to restart burner. e. For detailed information on operation of primary control, refer to instructions included with furnace.
WARNING: Failure to replace any heat exchanger gas- kets with new gaskets when any heat exchanger plates or covers are removed could lead to heat exchanger leakage, sooting, and/or a hazardous condition capable of causing bodily harm. This furnace should never be operated without an air filter.
A94328 SERVICE TRAINING Packaged Service Training programs are an excellent way to increase your knowledge of the equipment discussed in this manual, including: • Unit Familiarization • Maintenanc.
An important point after buying a device Bryant 369RAN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bryant 369RAN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bryant 369RAN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bryant 369RAN you will learn all the available features of the product, as well as information on its operation. The information that you get Bryant 369RAN will certainly help you make a decision on the purchase.
If you already are a holder of Bryant 369RAN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bryant 369RAN.
However, one of the most important roles played by the user manual is to help in solving problems with Bryant 369RAN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bryant 369RAN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
