Instruction/ maintenance manual of the product XL5070NTC Brother
Go to page of 2
Step 3 Winding the bobbin. (Y our machine may be supplied with a fully wound bobbin, but you may want to fill another bobbin with your own thread.) Step 4 Lower threading. (Y our machine may be supplied with a threaded bobbin, but you may want to use another bobbin with your own thread.
Starting to sew . • W ith your right hand, turn the balance wheel towards you (counter-clockwise), so that the needle moves down and back up again to its highest position. Pull the upper thread towards you, and the lower thread will come up from the bobbin in a small loop ( figure 7c ).
An important point after buying a device Brother XL5070NTC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brother XL5070NTC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brother XL5070NTC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brother XL5070NTC you will learn all the available features of the product, as well as information on its operation. The information that you get Brother XL5070NTC will certainly help you make a decision on the purchase.
If you already are a holder of Brother XL5070NTC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brother XL5070NTC.
However, one of the most important roles played by the user manual is to help in solving problems with Brother XL5070NTC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brother XL5070NTC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
