Instruction/ maintenance manual of the product STAR 120E Brother
Go to page of 93
® OPERATION MANUAL MANUAL DE INSTRUCCIONES.
"IMPOR T ANT SAFETY INSTR UCTIONS" When using the sewing machine, basic safety precautions should always be followed, including the following: "Read all instructions before using." D ANGER – T o reduce the risk of electric shock: 1.
“IMPOR T ANTES INSTR UCCIONES DE SEGURID AD” Cuando se usa una máquina de coser, debe seguirse unas precauciones básicas y que vienen incluidas a continuación. “Leer las instrucciones antes de usar” PELIGR O – P ara reducir el riesgo de una descarga eléctrica.
FOR USERS IN UK, EIRE, MALTA AND CYPRUS ONLY. If your sewing machine is fitted with a 3 pin non-rewireable BS plug then please read the following. IMPORTANT (in the United Kingdom) Main supply (AC 230/240V~, 50Hz) DO NOT cut off the mains plug from equipment.
1. Connect the power cord or three-prong plug into the machine. 2. Connect the electrical supply plug into a wall outlet. - When leaving the sewing machine unattended, the main switch of the machine must be switched off or the plug must be removed from the socket outlet.
KNOWING YOUR SEWING MACHINE Principal parts ..................................................... 1 Principal parts ..................................................... 3 Accessories ......................................................... 5 OPTIONAL ACCESSORIES .
INDICE CONOZCA SU M Á QUINA DE COSER Elementos principales ......................................... 1 Elementos principales ......................................... 3 Accesorios ........................................................... 5 Funcionamiento de la m á quina de coser .
1 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Elementos principales Principal par ts 5 2 1 M F 3 4 0 9 H 8 I L E G A C D N B K 7 6 J Model PS-2500, PS-2400, PS-2300 STAR140E, STAR130E, ST.
2 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER 1 Dispositivo de bobinado de la canilla Hace bobina para la canilla que va a ser utilizada como hilo inferior. 2 Selector de largo de puntada Controla el largo de las puntadas. 3 Eje del carrete y porta carretes 4 Selector de ancho de puntada Controla el ancho de las puntadas.
3 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Principal par ts (Model PS-2200, STAR110) Elementos principales (Modelo PS-2200, STAR110) 5 2 1 C 3 4 8 F G J B D 9 0 A I 7 6 H E.
4 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER 1 BOBBIN WINDER DEVICE Winds the thread onto the bobbin to be used for the lower thread. 2 STITCH LENGTH DIAL Controls the length of the stitches. 3 SPOOL PIN AND SPOOL HOLDER 4 STITCH WIDTH DIAL Controls the stitch width.
5 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Accessories 1 Pata de cremalleras (1 pza) 2 Canilla (3 pzas) XA 3811-051 (para EE UU) XA 3812-052 (para otros países) Recambios (paquete de .
6 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Parts Code for Zigzag Presser Foot: XA5530-051 Model PS-2500, PS-2400, PS-2300 STAR140E, STAR130E STAR120E Foot Controller: Model N5V Parts Code: XA3931051 Note (For U.S.A. only) This foot controller can be used for sewing machine Models PS-2500, PS-2400, PS-2300.
7 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER OPERA TING Y OUR SEWING MA CHINE Connecting Plugs 1. Connect the power cord plug into the machine.
8 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Main P ower and Se wing Light Switches This switch turns the main power and sewing light on or off. 1 Turn on (toward the “ I ” mark) 2 Turn off (toward the “ O ” mark) Foot Contr oller When the foot controller is depressed lightly, the machine will run at a low speed.
9 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Replacing the Needle 1. Remove the power supply plug from the outlet. 2. Raise the needle bar to its highest position. 3. Lower the presser foot. 4. Remove the needle by loosening the needle clamp.
10 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Changing the Presser Foot It may be necessary to change the presser foot according to your sewing needs. SNAP-ON TYPE 1. Raise the needle to its highest position by turning the balance wheel toward you (counter clock- wise) and raise the presser foot lever.
11 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Distintos mandos Selector de puntadas Para seleccionar una puntada, sólo hace falta girar el selector de puntadas, situado en la derecha de la máquina. Este selector se puede girar en cualquier sentido.
12 KNOWING YOUR SEWING MACHINE CONOZCA SU M Á QUINA DE COSER RECOMMENDED WIDTHS AND LENGTHS FOR STITCHES PATTERN STITCH NAME RECOMMENDED WIDTH RECOMMENDED INSTRUCTION [mm(inch)] LENGTH [mm(inch)] MANUAL PAGE 1-STEP AUTOMATIC 3-5 (Dial 4~6) F-1.
13 KNOWING YOUR SEWING MACHINE CONOZCA SU M Á QUINA DE COSER Anchos y lar gos recomendados para cada puntada PUTADA NOMBRE OJAL AUTOM Á TICO DE 3-5 (Dial 4~6) F-1.
14 KNOWING YOUR SEWING MACHINE CONOZCA SU M Á QUINA DE COSER Selector de largo de puntada Seg ú n la puntada seleccionada, puede ser necesa- rio ajustar su largo para lograr mejores resultados. Los n ú meros indicados en el disco representan el largo de las puntadas en mil í metros.
15 KNOWING YOUR SEWING MACHINE CONOZCA SU M Á QUINA DE COSER Stitch Width Dial Depending on the stitch selected, you may need to adjust the stitch width. The numbers marked on the dial represent the stitch width. THE HIGHER THE NUMBER, THE WIDER THE STITCH.
16 KNOWING YOUR SEWING MACHINE CONOZCA SU M Á QUINA DE COSER Pulsador de retr oceso Para coser hacia atr á s, apriete a fondo el pulsador de retroceso y mant é ngalo en esa posici ó n mientras presiona ligeramente el pedal. Para volver a coser hacia adelante, suelte el pulsador.
17 KNOWING YOUR SEWING MACHINE CONOZCA SU M Á QUINA DE COSER P alanca de los alimentadores Utilice la palanca de los alimentadores para levantar o bajar los dientes de los alimentadores de conformi- dad con el trabajo a realizar.
18 KNOWING YOUR SEWING MACHINE CONOZCA SU M Á QUINA DE COSER Pulsador de puesta en mar cha/parada Presione una vez el pulsador de puesta en marcha/ parada para conectar la m á quina de coser; presione el bot ó n otra vez para pararla.
19 KNOWING YOUR SEWING MACHINE CONOZCA SU M Á QUINA DE COSER P alanca de control de zona de velocidad Controla la zona de velocidad. Si se usa el pedal, se puede controlar una velocidad m á xima gracias a la palanca de control de zona de velocidad.
20 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER (Model PS-2500, STAR140E) A utomatic Thread Cutter Use the Thread Cutter Lever to cut the threads. 1. After finishing sewing, move the needle to its lowest position, pull the Thread Cutter Lever down as far as possible, then release it.
21 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER * During twin needle sewing and when sewing with thread thicker than #30 or with nylon, metallic and other specialty threads, cut the threads with the thread cutter on the left side of the machine.
22 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER THREADING THE MA CHINE Winding the Bobbin 1. Place the spool of thread on the spool pin. The thread end should come from the bottom front of the spool. The spool holder closest to the thread spool size should be used to hold the spool securely on the spool pin.
23 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER 2. Place the bobbin on the bobbin winder shaft. Push the bobbin winder shaft to the right. 1 Spring on the shaft 2 Groove of the bobbin * Align the groove of the bobbin with the spring on the shaft.
24 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Model PS-2500, PS-2400, PS-2300 STAR140E, STAR130E, STAR120E 4. Slide the speed range control lever to its maxi- mum (as far to the right as possible). 5. Push the “ START/STOP ” button. The machine will stop automatically when the bobbin is full.
25 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Lo wer Threading 1. Raise the needle to its highest position by turning the balance wheel toward you (counterclockwise) and raise the presser foot lever. 2. Slide the button and open the cover.
26 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Upper Threading 1. Raise the presser foot using the Presser Foot Lever. 2. Raise the needle to its highest position by turning the balance wheel toward you (counterclockwise). 1 Presser foot lever Enhebrado superior 1.
27 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER 4. Deliver the upper thread as shown in this diagram. 1 The upper thread shutter opens when the Presser Foot Lever is raised. 1 Upper thread shutter 5. Make sure to guide the thread through the thread take-up lever from the right to the left.
28 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Using Needle Threader The needle threader can be used to thread the needle more easily. 1. Lower the presser foot lever. Lower the threader slightly and position the thread under the guide. 1 Needle threader 2 Guide 2.
29 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Manuall y Drawing Up Lo wer Thread When sewing gathers or darts, the lower thread can be manually drawn up so that it will have some excess. 1. Pass the thread along the groove in the direction of the arrow, and leave it there without cutting it.
30 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Costura con a guja doble Su m á quina de coser ha sido concebida para poder utilizar una aguja doble y permitir la costura con dos hilos superiores. Puede usar el mismo color de hilo o dos hilos de colores distintos para puntadas deco- rativas.
31 KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER 2 1 Contr ol de la tensión de los hilos * Sit ú e el disco de control de tensi ó n superior entre [3~5] si desea una tensi ó n para costura normal. Sit ú e el disco de control de tensi ó n superior en la tensi ó n correcta para el tipo de hilo y tejido que est á utilizando.
32 KNOWING YOUR SEWING MACHINE CONOZCA SU M Á QUINA DE COSER T ensi ó n de los hilos La tensi ó n de los hilos afectar á la calidad de las puntadas: puede requerir cierto ajuste cuando cam- bia de tejido o hilo. NOTA: Le recomendamos hacer una prueba en un pedazo de tela antes de empezar a coser en el tejido de trabajo.
33 KNOWING YOUR SEWING MACHINE CONOZCA SU M Á QUINA DE COSER Correct tension Correct tension is important since too much or too little tension will weaken your seams or cause puckers on your fabric.
34 KNOWING YOUR SEWING MACHINE CONOZCA SU M Á QUINA DE COSER 14 (Supplied with your machine) Cotton: 80 9 Synthetic Fine Mercerized Cotton Cotton: 60~80 11 Silk: “ A ” Synthetic Mercerized 50 Cot.
35 KNOWING YOUR SEWING MACHINE CONOZCA SU M Á QUINA DE COSER Algod ó n: 80 9 Sint é tico Algod ó n Mercer í a fina. Algod ó n: 60~80 11 Seda: “ A ” Sint é tico Mercer í a 50. Algod ó n: 50~60 Seda “ A ” Sint é tico Mercerized 50~60 16 Algod ó n: 40~50 Hilo Mercer í a gruesa.
36 STRAIGHT AND ZIGZAG STITCHING PUNTADAS RECTAS Y ZIGZAG Straight Stitching Pattern Stitch Length Stitch Width (Straight Stitch) 1-4 6 (Triple Stretch Stitch) Fixed 2.5 Starting Sewing 1. Turn the Pattern Selection Dial to show your desired stitch in the Pattern Indication Window.
37 STRAIGHT AND ZIGZAG STITCHING PUNTADAS RECTAS Y ZIGZAG Changing Sewing Direction 1. Stop the machine at the point where you wish to change direction with the needle still in the fabric. 2. Raise the presser foot and turn the fabric to line up its new direction using the needle as a turning point.
38 STRAIGHT AND ZIGZAG STITCHING PUNTADAS RECTAS Y ZIGZAG Removing the Material from the Machine 1. Stop the machine. 2. Raise the needle to its highest position and make sure that the thread take-up lever is also in its highest position (Model PS-2200, STAR110).
39 STRAIGHT AND ZIGZAG STITCHING PUNTADAS RECTAS Y ZIGZAG * During twin needle sewing and when sewing with thread thicker than #30 or with nylon, metallic and other specialty threads, cut the threads with the thread cutter on the left side of the machine.
40 STRAIGHT AND ZIGZAG STITCHING PUNTADAS RECTAS Y ZIGZAG Puntadas zigzag Modelo de puntada Largo de puntada Ancho de puntada (Puntada zigzag) F-4 0-5 Puntadas zigzag Seleccione la puntada zigzag con el selector de puntadas. Luego, elija el largo y ancho de la punta- da.
41 BUILT-IN STITCHES PUNTADAS INCORPORADAS Puntadas in visibles Modelo de puntada Largo de puntada Ancho de puntada (Puntada invisible) F-2 3-6 (Puntada invisible elástica) F-1,5 La puntada de dobladillo invisible sirve para terminar la orilla de una prenda, tal como el borde inferior de los pantalones, sin que se vea la costura.
42 BUILT-IN STITCHES PUNTADAS INCORPORADAS Shell T uck Stitching Pattern Stitch Length Stitch Width (Shell Tuck Stitch) F-3 3-6 The Shell Tuck Stitch can be used to sew a picot (lace like) edge on a lightweight fabric. 1. Set the Pattern Selection Dial to Shell Tuck Stitch.
43 BUILT-IN STITCHES PUNTADAS INCORPORADAS Elastic Stitching Pattern Stitch Length Stitch Width (Elastic Stitch) F-2.5 3-6 The Elastic Stitch can be used for 3 functions: mending, sewing elastic or joining fabric. Each is explained below. Set the Pattern Selection Dial to Elastic Stitch.
44 BUILT-IN STITCHES PUNTADAS INCORPORADAS Double Action Stitc hing Pattern Stitch Length Stitch Width (Double Action Stitch) F-3 3-6 (Bridging Stitch) F-3 3-6 (Rampart Stitch) F-3 3-6 (Decorative Stitch) 6 This stitch is used for joining two pieces of fabric, for example, when making patchwork.
45 BUILT-IN STITCHES PUNTADAS INCORPORADAS Scallop Stitching Pattern Stitch Length Stitch Width (Scallop Stitch) F-1.5 3-6 This machine automatically produces a Scallop Stitch which may be used as a decorative edging. 1. Set the Pattern Selection Dial to Scallop Stitch.
46 BUILT-IN STITCHES PUNTADAS INCORPORADAS Puntadas decorativ as Modelo de puntada Largo de puntada Ancho de puntada (Puntada escalera) 6 (Puntada fest ó n doble) 6 ( Puntada decorativa) 6 ( Puntada .
47 BUILT-IN STITCHES PUNTADAS INCORPORADAS P atchw ork Modelo de puntada Largo de puntada Ancho de puntada (Puntada de uni ó n) (Puntada fagoting) 3-6 Estas puntadas sirven para juntar dos piezas de tejido dejando un espacio entre las dos orillas. 1.
48 BUILT-IN STITCHES PUNTADAS INCORPORADAS Puntada por encima de la orilla Modelo de puntada Largo de puntada Ancho de puntada (Puntada peine) (Puntada overlock estrecha) 3-5 (Puntada overlock el á stica) (Puntada ondas el á stica) F-3 Estas puntadas se usan para juntar costuras y acabarlas en una sola operaci ó n.
49 BUILT-IN STITCHES PUNTADAS INCORPORADAS Feather Stitching Pattern Stitch Length Stitch Width (Feather Stitch) 3-6 Use the Feather Stitch as a decorative top stitch or when hemming blankets, tablecloths or draperies or when embroidering. 1. Set the Pattern Selection Dial to Feather Stitch.
50 BUILT-IN STITCHES PUNTADAS INCORPORADAS T riple Zigza g Stretch Stitching Pattern Stitch Length Stitch Width (Triple Zigzag Stretch Stitch) 3-6 This stitch can be used to sew heavyweight stretch fabrics wherever a Zigzag Stitch could be used. The Triple Zigzag Stretch Stitch can also be used as a decorative top stitch.
51 BUTTONHOLE AND BUTTON SEWING OJALES Y COSTURA DE BOTONES P ara coser ojales Modelo de Largo de Ancho de Prensatelas puntada puntada puntada F-1,5 4-6 Prensatelas para ojales NOTA: 1. Le recomendamos hacer una prueba de costura de ojales en un pedazo de tela antes de empezar a hacerla en el tejido de trabajo.
52 BUTTONHOLE AND BUTTON SEWING OJALES Y COSTURA DE BOTONES NOTA: No baje la palanca del prensatelas mientras est é presionando la zona del prensatelas marcada como a en la figura C, ya que coser í a un ojal de tama ñ o incorrecto. 1 Permita este espacio.
53 BUTTONHOLE AND BUTTON SEWING OJALES Y COSTURA DE BOTONES 6. Hold the upper thread and press the “ START/ STOP ” Button. 7. After stitches 1 , 2 , 3 and 4 are automatically sewn, stop the sewing machine.
54 BUTTONHOLE AND BUTTON SEWING OJALES Y COSTURA DE BOTONES Para completar las puntadas y cortar el ojal 1. Para asegurar las puntadas, gire el tejido a 90 grados en el sentido contrario al de las manecillas de un reloj y cosa unas Puntadas Rectas hasta el final de la l í nea del remate de la parte delantera.
55 BUTTONHOLE AND BUTTON SEWING OJALES Y COSTURA DE BOTONES 1 Right row 2 STITCH LENGTH 3 Shorter 4 Longer 5 Adjusted stitch 1 Lado derecho 2 Largo de puntada 3 M á s corto 4 M á s largo 5 En caso que 3. After obtaining a satisfactory feeding on the right side, stitch the left side of the buttonhole and observe the feeding.
56 BUTTONHOLE AND BUTTON SEWING OJALES Y COSTURA DE BOTONES When the buttonhole is not sewn correctly: There are two different procedures for correct- ing buttonhole sewing, depending on which part of the buttonhole is not sewn correctly. Correction Procedure 1 (See fig.
57 BUTTONHOLE AND BUTTON SEWING OJALES Y COSTURA DE BOTONES Button Sewing Pattern Stitch Length Stitch Width Foot F Less than 5 1. Measure the distance between the holes and set the appropriate stitch width using the Stitch Width Dial. For example, if the distance between the holes is 1.
USING ATTACHMENTS AND APPLICATIONS USO DE ACCESORIOS Y APLICACIONES 58 Zipper Inser tion Pattern Stitch Length Stitch Width Foot 2-3 0 Zipper Foot The zipper foot is used to sew various types of zippers and can easily be positioned to the right or left side of the needle.
59 USING ATTACHMENTS AND APPLICATIONS USO DE ACCESORIOS Y APLICACIONES Fruncido Modelo de puntada Largo de puntada 2 1. Coloque el selector de puntadas en la puntada recta. 2. Suelte la tensión del hilo superior para que el hilo inferior se encuentre tirante en el revés del tejido.
USING ATTACHMENTS AND APPLICATIONS USO DE ACCESORIOS Y APLICACIONES 60 6. Repita esta operación hasta que el zurcido se haya completado, creando unas cuantas líneas de puntadas paralelas. 6. Repeat this motion until the portion to be darned is filled with parallel lines of stitching.
61 USING ATTACHMENTS AND APPLICATIONS USO DE ACCESORIOS Y APLICACIONES Monogramming and Embr oidering Pattern Stitch Length Stitch Width Foot Any Any None PREPARING FOR MONOGRAMMING AND EM- BROIDERING 1. Lower the feed dogs by setting the Drop Feed Lever to the Down Position as shown on page 17.
USING ATTACHMENTS AND APPLICATIONS USO DE ACCESORIOS Y APLICACIONES 62 MONOGRAMMING 1. Sew, moving the hoop slowly along the lettering at a constant speed. 2. Secure with a few straight stitches at the end of the last letter. Monogramas 1. Cosa moviendo el bastidor lentamente por las letras, a una velocidad constante.
63 USING ATTACHMENTS AND APPLICATIONS USO DE ACCESORIOS Y APLICACIONES Using the W alking Foot Pattern Stitch Length Stitch Width (Straight Stitch) 1-4 0 (Zigzag Stitch) 0-5 This foot is very useful for sewing materials such as vinyl cloth, synthetic leather, thin leather, etc.
64 USING ATTACHMENTS AND APPLICATIONS USO DE ACCESORIOS Y APLICACIONES C B NOTE: Please sew in slow to medium speed. Nota: Cosa a una velocidad entre baja y media.
65 USING ATTACHMENTS AND APPLICATIONS USO DE ACCESORIOS Y APLICACIONES OPTIONAL A CCESSORIES Using the Spring-action Quilting Foot Pattern Stitch Length Stitch Width Feed Dog Any 0 (center) Down position The Spring -action Quilting Foot is useful for darning and freemotion machine quilting.
66 USING ATTACHMENTS AND APPLICATIONS USO DE ACCESORIOS Y APLICACIONES * Before starting to sew, draw the quilting design on the fabric. 7. Use both hands to keep the fabric firmly stretched and move the fabric to sew over the drawn design. (See fig. C) A Quilting design (Line) 8.
67 USING ATTACHMENTS AND APPLICATIONS USO DE ACCESORIOS Y APLICACIONES OPTIONAL A CCESSORIES Using the 1/4" Seam Guide Foot Pattern Stitch Length Stitch Width (Straight Stitch) 2-2.5 0 (center) The 1/4" Seam Guide Foot is used to sew fixed seam allowance 6.
68 MAINTENANCE MANTENIMIENTO Changing the Bulb 1. Remove the power supply plug from the outlet. 2. Loosen the screw on the reverse side of sewing head as shown in fig. A . 3. Remove the face plate from the machine as illustrated in fig. A . Cambio de la bombilla 1.
69 MAINTENANCE MANTENIMIENTO (Model PS-2200, STAR110) 4. Replace the sewing light bulb. (See fig. B ) 1 Bulb 2 Loosen 3 Tighten 5. Reattach the face plate and fasten the screw as shown in fig. C . BC (Modelo PS-2200, STAR110E) 4. Cambie la bombilla tal como se muestra en la fig.
70 MAINTENANCE MANTENIMIENTO Limpieza 1. Retire la clavija de la toma de corriente. 2. Levante la aguja y el prensatelas. 3. Suelte el tornillo del prensatelas y el tornillo de ajuste de la aguja para sacar el soporte del prensatelas y la aguja. Véase fig.
71 MAINTENANCE MANTENIMIENTO 6. Remove the shuttle hook. (See fig. C ) 7. Clean out lint and dust. * Use soft fabric to clean the shuttle hook. DO NOT oil the shuttle hook or shuttle race. (See fig. D ) 4 Shuttle hook 5 Shuttle race * DO NOT OIL. 6. Retire el garfio de la lanzadera.
72 MAINTENANCE MANTENIMIENTO A utomatic Thread Cutting (Model PS-2500, STAR140E) NOTE: Do not operate the Thread Cutter Lever while sewing or when there is no fabric in the sewing machine.
73 MAINTENANCE MANTENIMIENTO (Model PS-2500, STAR140E) Correcting a Pr oblem with the A utomatic Thread Cutter CAUTION: Be sure to unplug the power supply cord in order to reduce the risk of injuries or electric shock. 1. Turn off the main power supply.
74 MAINTENANCE MANTENIMIENTO 5. Turn off the main power supply. 6. Raise the Presser Foot Lever and remove the fabric as explained in step 2 above. If the fabric cannot be removed, cut the thread on the back of the fabric with scissors and remove the fabric.
75 MAINTENANCE MANTENIMIENTO P erformance Chec klist Whenever sewing difficulties are encountered, re- view the section in this instruction manual that details the operation you are performing to make sure you are correctly using the machine. If the problem continues, the following check list may help you to improve the operation.
76 MAINTENANCE MANTENIMIENTO Upper thread is not correctly installed. Upper thread tension is too tight. Upper thread is tangled. Spool of thread is not correctly installed. Needle is bent or not sharp. The combination of needle size/ thread size/fabric is incorrect.
77 MAINTENANCE MANTENIMIENTO El hilo superior no está bien enhe- brado El hilo inferior está enredado Se está usando una aguja inferior Hay polvo en el fondo de la placa de agujas El hilo no está .
78 MAINTENANCE MANTENIMIENTO ▼ Stitch Length Dial is set at no feeding. ("0") Needle is not correctly inserted. ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ .
79 MAINTENANCE MANTENIMIENTO ▼ No ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ Página 35 Página 9 Página 26 No Página 14 No Página 9 No No Página 7 P.
80 MAINTENANCE MANTENIMIENTO ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ Page 21 Page 21 Page 24 No Page 20 No Page 21 No No No No Page 73 No The threads are tangled. ▼ Page 73 The threads are tangled. ▼ ▼ ▼ ▼ ▼ No Page 21 Page 26 No No Nylon or another specialty thread is being used.
81 MAINTENANCE MANTENIMIENTO ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ Page 21 Page 21 Page 24 No Page 20 No Page 21 No No No No Page 73 No Los hilos están enredados. ▼ Page 73 Los hilos están enredados. ▼ ▼ ▼ ▼ ▼ No Page 21 Page 26 No No Se está utilizando nylon u otro hilo especial.
82 MAINTENANCE MANTENIMIENTO Embalaje de la máquina Guarde la caja de cartón y el embalaje por si acaso necesita transportar la máquina en el futuro. Un embalaje inadecuado o con materiales inapropiados puede causarle daños a la máquina durante el transporte.
83 INDEX ÍNDICE Página A Accesorios .......................................................... 3 Aguja Cambio ...................................................... 6 Verificación ................................................ 6 Ajuste fino de los ojales .
84 INDEX ÍNDICE Página L Limpieza ............................................................ 57 Limpieza de la pista de la lanzadera ................. 57 Listado de posibles incidencias ........................ 58 M Modalidad brazo libre .........
Página L Limpieza ............................................................ 57 Limpieza de la pista de la lanzadera ................. 57 Listado de posibles incidencias ........................ 58 M Modalidad brazo libre ..........................
ENGLISH SPANISH 194377-011 Printed in Taiwan.
An important point after buying a device Brother STAR 120E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brother STAR 120E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brother STAR 120E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brother STAR 120E you will learn all the available features of the product, as well as information on its operation. The information that you get Brother STAR 120E will certainly help you make a decision on the purchase.
If you already are a holder of Brother STAR 120E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brother STAR 120E.
However, one of the most important roles played by the user manual is to help in solving problems with Brother STAR 120E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brother STAR 120E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
