Instruction/ maintenance manual of the product S-7200B Brother
Go to page of 28
S-7200B SINGLE NEEDLE DIRECT DRIVE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. This basic operation manual describes basic operations including sewing machine operations.
S-7200B Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions and the explanations given in the instruction manual.
S-7200B i SAFETY INSTRUCTIONS [1] Safety indications and their meanings This instruction manual and the indications and symbols that are used on the ma chine itself are provided in order to ensure safe operation of this machine and to prevent accidents and injury to yourself or other people.
S-7200B ii [2] Notes on safety DANGER Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the face plate of the control box. Touching areas where high voltages are present can result in severe injury.
S-7200B iii CAUTION Sewing This sewing machine should only be used by operators who have receiv ed the necessary training in safe use beforehand. The sewing machine should not be used for any applications other than sewing. Be sure to wear protective goggles when using the machine.
S-7200B iv [3] Warning labels The following warning labels appear on the sewing machine. Please follow the instructions on the labels at all times when using the machine. If the la bels have been removed or are difficult to read, please contact your nearest Brother dealer.
S-7200B CONTENTS 1. CONVENIENT FUNCTION FOR SMOOTH SEWING ............................... 1 2. NAMES OF MAJOR PARTS ................ 2 3. INSTALLATION .................................... 3 3-1. Table proce ssing diagram ..............................
S-7200B 1. CONVENIENT FUNCTION FOR SMOOTH SEWING 1 1. CONVENIENT FUNCTION FOR SMOOTH SEWING Lower thread counter Notification given when greasing is required INSTRUCTION MANUAL CD 5-7.
S-7200B 2. NAMES OF MAJOR PARTS 2 2. NAMES OF MAJOR P ARTS (1) Bobbin winder (2) Thread wiper (-4[][] specifications) (3) Lifting lever (4) Quick reverse (Actuator) (5) Presser foot (6) Control box (7.
S-7200B 3. INSTALLATION 3 3. INST ALLA TION CAUTION Machine installation should only be carried out by a qualified technician. Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine weighs more than 44 kg.
S-7200B 3. INSTALLATION 4 3-1. Table processing diagram The top of the table should be 40 mm in thickness and should be strong enough to hold the weight and with-stand the vibration of the sewing machine. Drill holes as indicated in the illustration below.
S-7200B 3. INSTALLATION 5 3 . Power switch (1) Power switch (2) Screws [2 pcs] 4 . Oil pan (1) Head cushions (left) [2 pcs] (2) Head cushions (right) [2 pcs] (3) Oil pan 5 .
S-7200B 3. INSTALLATION 6 7 . Machine head (1) Hinges [2 pcs] (2) Machine head (3) Head rest NOTE: Tap the head rest (3) securely into the table hole. If the head rest (3) is not pushed in as far as it will go, the machine head will not be sufficiently stable when it is tilted back.
S-7200B 3. INSTALLATION 7 1 1 . Knee lifter plate (1) Knee lifter plate (2) Bolt * Loosen the bolt (3) and move the knee lifter plate (1) to a position where it is easy to use. <Knee lifter adjustment> 1. Turn the machine pulley so that the feed dog is below the top of the needle plate.
S-7200B 3. INSTALLATION 8 3-3. Lubrication (-[]0[],[]3[] specifications) * If the sewing machine is -[]5 [] specifications, it is a complete dry type machine, and so no lubrication is necessary.
S-7200B 3. INSTALLATION 9 3-4. Connecting the cords DANGER Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the face plate of the control box. Touching areas where hi gh voltages are present can result in severe injury.
S-7200B 3. INSTALLATION 10 (1) 7-pin head detector unit connector (2) 10-pin operating panel connector (Models with operation panel) (3) 14-pin encoder connector (4) 14-pin machine connector Refer to the following page for the 4-pin motor connector. 2.
S-7200B 3. INSTALLATION 11 3 . Other cords (1) 6-pin power supply connector (2) 4-pin motor connector (3) Wire clip (4) Power cord <For single-phase specifications> Insert the power cord plug (5) into a wall outlet. <For three-phase specifications> 1.
S-7200B 3. INSTALLATION 12 3-5. Test operation (Operating the treadle) CAUTION Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine. 1. Turning on the power <Models with operation panel> Press the ON power switch (1).
S-7200B 4. PREPARATION BEFORE SEWING 13 4. PREP ARA TION BEFORE SEWING 4-1. Installing the needle CAUTION Turn off the power switch before installing the needle. The machine may operate if the treadle is depressed by mistake, which could result in injury.
S-7200B 4. PREPARATION BEFORE SEWING 14 2126M 4-3. Winding the lower thread CAUTION Do not touch any of the movi ng parts or press any objects against the machine while winding the lower thread, as this may result in personal injury or damage to the machine.
S-7200B 4. PREPARATION BEFORE SEWING 15 4-5. Threading the upper thread CAUTION Turn off the power switch before threading the upper thread. The machine may operate if the treadle is depressed by mistake, which could result in injury. Turn the machine pulley and raise the thread take-up (1) before threading the upper thread.
S-7200B 5. USING THE OPERATION PANEL (BASIC OPERATIONS) 16 5. USING THE OPERA TION P ANEL (BASIC OPERA TIONS) 5-1. Names and functions • The operation panel keys cannot be operated while sewing is in progress. Select the keys and set the number of stitches before starting sewing.
S-7200B 5. USING THE OPERATION PANEL (BASIC OPERATIONS) 17 (6) Fixed stitch key When this key is pressed so t hat the indicator illuminates, t he number of stitches (1-1999) in the E stitch number display is sewn, and then the sewing machine stops automatically.
S-7200B 5. USING THE OPERATION PANEL (BASIC OPERATIONS) 18 5-2. Sewing start and end backtack stitches 1 Setting start backtack stitches 2 Setting end backtack stitches 3 Start backtacking is carried out. After it has finished, normal sewing continues for as long as the treadle remains depressed.
S-7200B 6. SEWING 19 6. SEWING CAUTION Attach all safety devices before usi ng the sewing machine. If the machine is used without these devices attached, injury may result. Turn off the power switch at the following times. The machine may operate if the treadle is depressed by mistake, which could result in injury.
S-7200B MEMO 20.
For cleaning, standard adjustments and more details, please refer to the instruction manual contained in the Document CD. Contents of the Document CD The following documents are contained in PDF format.
An important point after buying a device Brother S-7200B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brother S-7200B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brother S-7200B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brother S-7200B you will learn all the available features of the product, as well as information on its operation. The information that you get Brother S-7200B will certainly help you make a decision on the purchase.
If you already are a holder of Brother S-7200B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brother S-7200B.
However, one of the most important roles played by the user manual is to help in solving problems with Brother S-7200B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brother S-7200B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
