Instruction/ maintenance manual of the product NX 200 Brother
Go to page of 111
.
Cover A GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Enclosed Accessories After open ing the b ox, check that the follo wing acce ssor ies are encl osed. If an y item is m issing or damaged, contact your retaile r. Access ories The f ollowing item s should al so be encl osed in the bo x.
Cover B GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Names of Machine Parts and Their Fun ctions The nam es of the various part s of the s ewing ma chine and their fun ctions are de scribed belo w. Before us ing the sewing mac hine, care fully read the se descript ions to learn th e names of th e machine parts.
————— ———————— ——————————— ——————————— ————— Names of Ma chine Parts and Their Functions Cover C GETTING READ Y CONTENTS.
Cover D GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Operation buttons The ope ration butt ons help you to eas ily perform v arious bas ic sewi ng mach ine operatio ns. 1 Start/stop button Press the start/stop button to start or stop sewing.
Cover E GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Operation panel The ope ration pan el, located on the front a t the right of the sewin g machine, co nsists of various bu ttons and sliders for spe cifying how the sti tch will be sewn .
1 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Optional Accessories The follo wing are av ailable as o ptional accessori es. 1. Side cutter Part code: SA177, XC3879-002 2. Quil ting g uide Part code: SA132, XC2215-002 3. Wide table Part code: SA537, XC4541-051 4.
2 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Introduction Thank y ou for purcha sing this sewing machin e. Before using this sewing mach ine, caref ully read the “Im portant Safet y Instruction s” (page 6), and then st udy this manual for the correc t operatio n of the vari ous functions.
3 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Contents Enclosed Accessorie s ................ ............. .................... ................... ............. ............... Co ver A Acces sories .. ...... ...... ..
———————— ———————— ———————— ——————————— ———————— ———————— ——————————— — 4 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Adjusting the Stitch W idth and Le ngth .
5 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX APPENDIX ..... .............. .............. ................... .............. .............. .................. ..... 91 Stitch Se ttings .. ................... ...........
6 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Important Safety Instructions When us ing this mac hine, basic safety precau tions shou ld always be taken, includi ng the foll owing: Read all ins tructions befor e using. DANGER - To reduce t he risk of e lectric sh ock: 1.
7 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY If this ma chine is fitte d with a thre e-pin non- rewireable BS plu g then pl ease read the following.
8 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX CONGRATULATIONS ON C HOOSING OUR MA CHINE Your machi ne is one of the most a dvanced com puterized househol d sewing m achines. To fully enjoy all t he features, we suggest that you stud y the manua l before u sing the ma chine.
1 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX GETTING READY The variou s preparat ions requir ed before starting to sew are desc ribed in thi s chapte r. Turning the Machine On /Off ....... .................... .........
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 10 GETTING.
Turning the Machine On /Off 11 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Turning on the machine 1 Make sure that the sewing machine is tu rned off (th e main po wer swi tch is set t o “O”) , and then plug the power supply cord into the power supply jack on the right side of the machi ne.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 12 GETTING.
Winding/ Installing the Bobbin 13 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 1 Turn on the sewing ma chine. 2 Lift o pen the u pper co ver. 3 Place th e bobbin on t he bobbin winder s haft so that the spring on the shaft fits in to the notch in t he bobbin .
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 14 GETTING.
Winding/ Installing the Bobbin 15 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX c Slide the sewing speed controller to the right (so that the speed will be fast). 1 Sewing spe ed controll er d Press (start/stop b utton) once.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 16 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Installing the bobbin Install the bobbin woun d with threa d.
Winding/ Installing the Bobbin 17 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 7 Reatt ach the bo bbin co ver. Insert the tab in the low er-left corne r of the bobbin c over, and the n lightly pre ss down on the ri ght sid e.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 18 GETTING.
Uppe r Thread ing 19 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX • If the presser foot is no t raised, the sewing machi ne cann ot be t hread ed corr ectly . 3 Press (needle positio n button ) once or twice to raise the needle.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 20 GETTING.
Uppe r Thread ing 21 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Threading the needle The nee dle threade r can be used with needl e size 75/11 thro ugh 100/16. F or more deta ils on the needle, refer to “ Needle type s and their uses” (page 2 6).
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 22 GETTING.
Uppe r Thread ing 23 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 4 Insert the extra spool pi n onto the bobbin winder shaf t. Insert the extra spoo l pin so that it i s perpend icular to the bobbin wi nder shaft. 1 Bobbin winder shaft 5 Swing d own the spoo l pin so that it is horizo ntal.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 24 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX a Select a stit ch.
Uppe r Thread ing 25 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Pulling up the bobbin thread When making gathers or before free-motion qui lting, first pull up the bobbi n thread as described be low. 1 Insert the bobbi n into the shuttle .
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 26 GETTING.
Replacing the Needle 27 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Memo ● The sma ller the threa d number, th e thicker the thre ad, and the larger the n eedle numbe r, the thicke r the needle. ● Use the ball point ne edle when sew ing on stretch f abrics or fabrics where sk ipped stit ches easi ly occur .
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 28 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Replacing t he needle Repl ace the needl e as desc ribed below.
Replac ing the Press er Foot 29 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Replacing the Presser Foot The presse r foot presses down o n the fab ric. Presser foot precautions Be sure to observe the f ollowing preca utions concer ning the presse r feet.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 30 GETTING.
Replac ing the Press er Foot 31 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Removing the presser foot holder Remove the presser foot holder when clea ning the sewing mac hine or whe n installing a p resser foot tha t does not u se the presse r foot holder, su ch as the quilting f oot.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 32 GETTING.
Sewing Cylindri cal or Large Pieces 33 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Sewing Cylindrical or Large Pi eces When sewing cylindrical or large piec es of fabri c, remove the flat bed atta chment.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 34 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 4 Turn the sc rew at the bottom of the legs to adjust t heir heigh t.
2 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX SEWING BASICS The n ecessary pr eparat ions for se wing are de scribed i n this ch apter. Sewing .... ................... ................... ............. ..................
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 36 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Sewing Basic se wing opera tions are d escribed belo w.
Sewing 37 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX General sewing procedure Follow t he basi c procedure s below to sew. 1 Turn on the machi ne. Turn o n the se wing ma chine . For det ails on turni ng on the ma chine, refer to “Turning on the machin e” (pag e 11).
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 38 GETTI.
Sewing 39 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Starting to sew Once yo u are ready to start sew ing, you can start the sewin g machin e. The se wing sp eed can b e adjust ed using eith er the opera tion buttons or the foot controller.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 40 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 3 Turn on the sewing ma chine.
Sewing 41 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Securing the stitching When sewing w ith the straight stitc h, for example, at the end of an openin g or where se ams do not overlap , use reverse stit ching or reinf orcement stitching t o secure the end of the th read.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 42 GETTI.
Sewing 43 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Cutting the threa d When you have finished se wing, cut th e threads. 1 When y ou wish to finish th e stitch ing and th e sewing machine is stopped, press (needle pos ition button) o nce to raise th e needle.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 44 GETTI.
Adjusting the Thread Tension / Adju sting the Stitch Width a nd Length 45 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Adjusting th e Sti tch Width and Length The zig zag width (pa ttern width) a nd stitch leng th of utility stit ches can be adjusted.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 46 GETTI.
Useful Fun ctions 47 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Useful Functions Function s useful in impro ving sewing efficiency are described b elow.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 48 GETTI.
Usef ul Sewi ng Tip s 49 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Useful Sewi ng Tips Various ways t o achieve better results for your se wing projec ts are descr ibed belo w. Refer to th ese tips when sewi ng your proje ct.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 50 GETTI.
Usef ul Sewi ng Tip s 51 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Sewing thin fabrics When sewing t hin fabrics, the stitching ma y become misaligne d or the fabri c may not f eed correctly. If this oc curs, place th in paper or sta bilizer materia l under the fabric and sew it together w ith the fabri c.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 52 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX F0_brotherE.
3 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX UTILITY ST ITCHES The variou s stitches a nd their a pplication s are describ ed in this chapter. Selecting St itching ..... ............. ................... ...............
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 54 GETTI.
Selectin g Stitching 55 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 2 To adjust th e stitch wi dth, slide the stitc h width ad justment slider up or down. Press the stitch width adj ustment button, a nd then slide the stitch wi dth adjustmen t slider to adjust the stitch width.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 56 GETTI.
Overcastin g Stitches 57 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Sewing overcasting stitches using zigzag foot “J” Three stitc hes can be used to sew overc asting stitche s with zigzag f oot “J”. 1 Attac h zigza g foot “J” .
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 58 GETTI.
Overcastin g Stitches 59 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 6 Raise t he presse r foot le ver to che ck that t he side cutter is securely attached. 7 Pass the upper thread unde r the side cutter, and then pull it out t oward the rea r of the sewing mach ine.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 60 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Basic Stitching Straight stitches are use d for sewing p lain seams.
Blind He m Stitching 61 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Blind Hem Stitchi ng Secure the bottoms of skirts and pa nts with a bli nd hem. T wo stitches ar e available fo r blind hem stit ching. Sew a blind hem ac cording to t he follow ing procedure .
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 62 GETTI.
Buttonhole S titching 63 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Buttonhol e Stitching Button holes can be sew n and button s can be sew n on. Five stit ches are av ailable for sew ing one-step buttonhol es. Stitch Name Pattern Application Stitch Wi dth [mm (inch.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 64 GETTI.
Buttonhole S titching 65 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX ■ If the button does not fit in the button gu ide plate Add togeth er the diam eter and thic kness of the button , and then se t the button g uide plate to t he calcu lated le ngth.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 66 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 9 Raise the buttonhole le ver to its origi nal position .
Buttonhole S titching 67 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX ■ Sewin g buttonholes on stretch fabrics When sewing buttonhole s on str etch fabrics , use a gimp t hread.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 68 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 4 Place the butto n into button-sewing f oot “M”.
Buttonhole S titching 69 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX ■ Attach ing a shan k to a but ton To sew the b utto n with a sha nk, a ttach t he bu tton with spa ce between it and the fa bric, and then wind the thread by hand.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 70 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Zipp er Inserti on A zippe r can b e sewn in place.
Zipper Inse rtion 71 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 6 Select stitch . • For d etails, refer to “ Selectin g stitching” (page 5 4). 7 Topstitc h around the z ipper. 1 Stitching 2 Right side of fabric 3 Basting stitching 4 End of zipper opening 8 Remove the basting stitchin g.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 72 GETTI.
Zipper Inse rtion 73 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 0 Clos e the zippe r, turn ov er the fab ric, an d then baste th e other sid e of the z ipper to the fabric. 1 Basting stitching a Attach the presser foot hold er to the other pin of zi pper foot “I ”.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 74 GETTI.
Sewing S tretch Fabric s and Elas tic Tape 75 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 3 Select stitch . • For d etails, refer to “ Selectin g stitching” (page 5 4). 4 Sew the elastic ta pe to the fabric while stretching the tape so that it is the same le ngth as the fabr ic.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 76 GETTI.
Appliqué , Patchwor k and Quilt S titching 77 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Appliqué stitching 1 Cut out the appliqué , leaving a seam allowan ce of betw een 3 an d 5 mm (1/ 8 and 3/ 16 i nch).
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 78 GETTI.
Appliqué , Patchwor k and Quilt S titching 79 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Memo ● To ch ange the width of the seam allow ance (the ne edle position), a djust the stitch widt h. Quilting Sandw iching battin g between the top and bottom layers of fabric is called “quilting”.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 80 GETTI.
Appliqué , Patchwor k and Quilt S titching 81 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 4 Slide t he drop feed lev er, locat ed at the re ar of the mac hine on the base, to (to the right as se en fr om the fro nt of the ma chine ).
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 82 GETTI.
Reinforceme nt Stitching 83 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 2 Attach butt onhole fo ot “A”. • For d etails, refer to “R eplacing th e presser foot” (page 29). 3 Select stitch . • For d etails, refer to “ Selectin g stitching” (page 5 4).
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 84 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Eyelet Stitching Eyelets, such as those on belts, can be se wn.
Decorativ e Stitching 85 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Decorative Stitching Various dec orative stitc hes can be sewn w ith this sewing machine. Stitch Name Pattern Applic ation Stitch Width [mm (inch.)] Stitch Length [mm (inc h.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 86 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Fagoting Stitching across an open sea m is called “fa goting”.
Decorativ e Stitching 87 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Scal lop stit ching The wa ve-shaped repeating pattern tha t looks lik e shells is called “scalloping ”. It is used on the collars of blou ses and t o decor ate the ed ges of handke rchiefs.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 88 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 5 Select stitch or .
Decorativ e Stitching 89 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Heirloom stitching When sewin g with the wing need le, the need le holes are enla rged, creat ing a lac e-like dec orative stitch . This is used to decorate he ms and table cloths on thin or mediu mweight fabrics in addition to pla in weave fabrics.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 90 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 3 Select stitch .
4 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX APPENDIX The variou s mainte nance and troubles hooting pr ocedures a re des cribed in t his chapt er. Stitch Setting s .................. .................... ............. .
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 92 GETTIN.
Stitch Se ttings 93 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Joining s titch J Patchwor k stitching and decorat ive stitching 4.
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 94 GETTIN.
Stitch Se ttings 95 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Decorative stitches N For dec oration, etc. 7.0 (1/4) 0.0–7. 0 (0–1/4) 2.5 (3/32) 0.2 –4.0 (1/64–3/1 6) No Reinforce- ment No No N For dec oration, etc.
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 96 GETTIN.
Maintenanc e 97 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 3 Turn the b alance wh eel toward y ou until the tip of the shuttle hook alig ns with the edge of the race sh elf. 1 Shuttle r ace 2 Shuttle 3 Edge of t he shutt le race 4 Tip of the shuttle hook • Be sure to turn the bala nce wheel tow ard you.
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 98 GETTIN.
Trouble shooting 99 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX The upp er thread b reaks. The up per thread w as not threaded correct ly (for example, the spool is not inst alled correctl y, the spool cap is to o big for t he sp ool being used , or the thread has co me out of the nee- dle ba r thread ho ok).
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 100 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX The fab ric is wrinkl ed.
Troublesho oting 101 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Error message s If the s tart/stop but ton is pres sed before the sewing ma chin e is correctl y set up or if a n operation is perf ormed incorre ctly, an error mess age appe ars in th e stitch indicato r.
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 102 GETTI.
Index 103 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Index Numeri cs 3-po int zigza g stitc h ........ ...... ...... ......... ...... ...... ......... .... 57 A acce ssorie s ..... ........ ....... ...... ........ .....
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 104 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX P patc hwork sti tching .
English 882-S60 XC4665-051 1 Printed in T aiwan.
An important point after buying a device Brother NX 200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brother NX 200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brother NX 200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brother NX 200 you will learn all the available features of the product, as well as information on its operation. The information that you get Brother NX 200 will certainly help you make a decision on the purchase.
If you already are a holder of Brother NX 200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brother NX 200.
However, one of the most important roles played by the user manual is to help in solving problems with Brother NX 200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brother NX 200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
