Instruction/ maintenance manual of the product CS 8060 Brother
Go to page of 116
.
GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Cover A Enclosed Accessories After open ing the b ox, check that the follo wing acce ssor ies are encl osed. If an y item is m issing or damaged, contact your retaile r. Access ories 1.
GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Cover B Names of Machine Parts and Their Fun ctions The nam es of the various part s of the s ewing ma chine and their fun ctions are de scribed belo w. Before us ing the sewing mac hine, care fully read the se descript ions to learn th e names of th e machine parts.
————— ———————— ——————————— ——————————— ————— Names of Ma chine Parts and Their Functions Cover C GETTING READ Y CONTENTS.
Cover D GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Operation buttons The ope ration butt ons help you to eas ily perform v arious bas ic sewi ng mach ine operatio ns. 1 Thread cassette indi cator The indicator light s up or goes off depending on the condition of t he sewing machi ne.
Cover E GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Operation panel The ope ration panel, located on the front of the sewing mach ine, consists of v ari ous buttons a nd sliders for specifyin g how the stitch will be sewn.
1 ————— ————————————————————————————————————— —————————————————— Enclosed Ac ces.
2 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Introduction Thank y ou for purcha sing this sewing machin e. Before using this sewing machine , carefully rea d the “Imp orta nt Safety Instructio ns” (page 6), an d then study this manual for the correc t operatio n of the vari ous functions.
3 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Contents Enclosed Accessorie s ................ ............. .................... ................... ............. ............... Co ver A Acces sories .. ...... ...... ..
———————— ———————— ———————— ——————————— ———————— ———————— ——————————— — 4 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX SEWING BASICS .
5 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX APPENDIX ..... .............. .............. ................... .............. .............. .................. ..... 95 Stitch Se ttings .. ................... ...........
6 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Important Safety Instructions When us ing this mac hine, basic safety precau tions shou ld always be taken, includi ng the foll owing: Read all ins tructions befor e using. DANGER - To reduce t he risk of e lectric sh ock: 1.
7 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY If this ma chine is fitte d with a thre e-pin non- rewireable BS plu g then pl ease read the following.
8 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX CONGRATULATIONS ON C HOOSING OUR MA CHINE Your machi ne is one of the most a dvanced com puterized househol d sewing m achines. To fully enjoy all t he features, we suggest that you stud y the manua l before u sing the ma chine.
1 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX GETTING READY The variou s preparat ions requir ed before starting to sew are desc ribed in thi s chapte r. Turning the Machine On /Off ................... ............. ....
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 10 GETTING.
Turning the Machine On /Off 11 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Turning on the machine 1 Make sure that the sewing machine is tu rned off (th e main po wer swi tch is set t o “O”) , and then plug the power supply cord into the power supply jack on the right side of the machi ne.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 12 GETTING.
Winding/ Installing the Bobbin 13 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 5 Slide the bobbi n winder s haft to the ri ght. 6 Place th e spool of thread for th e bobbin onto the bobbi n thread spo ol pin. 7 Slid e the sp ool ca p onto the bo bbin th read spool p in.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 14 GETTING.
Winding/ Installing the Bobbin 15 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX a Slide the sewing speed controller to the right (so that the speed will be fast). 1 Sewing spe ed controll er b Press (start/stop b utton) once.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 16 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Installing the bobbin Install the bobbin woun d with threa d.
Winding/ Installing the Bobbin 17 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 7 Reatt ach the bo bbin co ver. Insert the tab in the low er-left corne r of the bobbin c over, and the n lightly pre ss down on the ri ght sid e.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 18 GETTING.
Uppe r Thread ing 19 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Loading the spool into the thread cas sette Load th e spool of threa d into the e nclosed threa d cassett e to pre pare t he upper thread . Memo ● The order for thre ading the thread ca ssette is indicated on the threa d cassette.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 20 GETTING.
Uppe r Thread ing 21 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 8 While holding the e nd of the th read with your right hand an d the thread cassette with y our left hand, cl ose th e cover. 9 Pass the thread through the slit in the to p of the thread cassette.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 22 GETTING.
Uppe r Thread ing 23 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX • If the needle is not raised to the cor rect position, the needle cannot be threaded with the nee dle threader . Be sure to ch eck that the threa d cassette indic ator is lit up in gree n before in serting the threa d cassette.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 24 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 5 Close t he thread ca ssette co mpartmen t cover.
Uppe r Thread ing 25 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 4 Thread the thread cassette with the thread from th e spool on the extra sp ool pin. • For m ore details, refe r to “Loading th e spool into the thread cassett e” (p age 19).
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 26 GETTING.
Uppe r Thread ing 27 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 5 Insert the thread c assette (with the extra spool pin attached) in to the thread cassette comp artmen t. • For more details, refer to ste p 5 in “Using the ext ra spool pin” (page 2 4).
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 28 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX a Star t sewi ng.
Uppe r Thread ing 29 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Pulling up the bobbin thread When making gathers or before free-motion qui lting, first pull up the bobbi n thread as described be low. 1 Insert the bobbi n into the shuttle .
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 30 GETTING.
Replacing the Needle 31 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Memo ● The sma ller the threa d number, th e thicker the thre ad, and the larger the n eedle numbe r, the thicke r the needle. ● Use the ball point ne edle when sew ing on stretch f abrics or fabrics where sk ipped stit ches easi ly occur .
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 32 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Replacing t he needle Repl ace the needl e as desc ribed below.
Replacing the Needle 33 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 6 While hol ding the needle w ith your left hand, use th e screwdrive r to tight en the ne edle clam p screw.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 34 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 4 Lowe r the ne edle-c hang ing too l.
Replac ing the Press er Foot 35 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Replacing the Presser Foot The presse r foot presses down o n the fab ric. Presser foot precautions Be sure to observe the f ollowing preca utions concer ning the presse r feet.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 36 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 4 Press the blac k butto n at the b ack of t he presser foot holder .
Replac ing the Press er Foot 37 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Removing the presser foot holder Remove the presser foot holder when clea ning the sewing mac hine or whe n installing a p resser foot tha t does not u se the presse r foot holder, su ch as the quilting f oot.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 38 GETTING.
Replac ing the Press er Foot 39 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 3 Raise t he presse r foot leve r. 1 Presser foot lever X The pre sser foot is rai sed. 4 With a screwdriver, loose n the presser foot holder scre w, and then remove the w alking foot.
GETTING READY —————— ——————————— ———————— ———————— ——————————— ————————— —— — 40 GETTING.
2 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX SEWING BASICS The n ecessary pr eparat ions for se wing are de scribed i n this ch apter. Sewing ... ................... ................... .................... ............
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 42 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Sewing Basic se wing opera tions are d escribed belo w.
Sewing 43 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX General sewing procedure Follow t he basi c procedure s below to sew. 1 Turn on the machi ne. Turn o n the se wing ma chine . For det ails on turni ng on the ma chine, refer to “Turning on the machin e” (pag e 11).
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 44 GETTI.
Sewing 45 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Starting to sew Once yo u are ready to start sew ing, you can start the sewin g machin e. The se wing sp eed can b e adjust ed using eith er the opera tion buttons or the foot controller.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 46 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 3 Turn on the sewing ma chine.
Sewing 47 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Securing the stitching When sewing w ith the straight stitc h, for example, at the end of an openin g or where se ams do not overlap , use reverse stit ching or reinf orcement stitching t o secure the end of the th read.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 48 GETTI.
Sewing 49 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Cutting the threa d When you have finished se wing, cut th e threads. 1 When y ou wish to finish th e stitch ing and th e sewing machine is stopped, press (needle pos ition button) o nce to raise th e needle.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 50 GETTI.
51 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Adjusting th e Sti tch Width and Length The zig zag width (pa ttern width) a nd stitch leng th of utility stit ches can be adjusted. Norma lly, when a stitc h is selected , the appropri ate width a nd length are automaticall y selected.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 52 GETTI.
Usef ul Sewi ng Tip s 53 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Useful Sewi ng Tips Various ways t o achieve better results for your se wing projec ts are descr ibed belo w. Refer to th ese tips when sewi ng your proje ct.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 54 GETTI.
Usef ul Sewi ng Tip s 55 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Sewing thin fabrics When sewing t hin fabrics, the stitching ma y become misaligne d or the fabri c may not f eed correctly. If this oc curs, place th in paper or sta bilizer materia l under the fabric and sew it together w ith the fabri c.
SEWI NG BASI CS ————————— ———————— ———————— ——————————— ———————— ————————— —— — 56 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX S2_brotherE.
3 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX UTILITY ST ITCHES The variou s stitches a nd their a pplication s are describ ed in this chapter. Selecting St itching ................. ................... ............. ...
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 58 GETTI.
Selectin g Stitching 59 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 2 To adjust th e stitch wi dth, slide the stitc h width ad justment slider to the left or righ t. Press the stitch width adj ustment button, a nd then slide the stitch wi dth adjustmen t slider to adjust the stitch width.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 60 GETTI.
Overcastin g Stitches 61 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Sewing overcasting stitches using zigzag foot “J” Three stitc hes can be used to sew overc asting stitche s with zigzag f oot “J”. 1 Attac h zigza g foot “J” .
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 62 GETTI.
Overcastin g Stitches 63 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 4 Raise t he presse r foot le ver to che ck that t he side cutter is securely attached. 5 Pass the upper thread unde r the side cutter, and then pull it out t oward the rea r of the sewing mach ine.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 64 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Basic Stitching Straight stitches are use d for sewing p lain seams.
Blind He m Stitching 65 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Blind Hem Stitchi ng Secure the bottoms of skirts and pa nts with a bli nd hem. T wo stitches ar e available fo r blind hem stit ching. Sew a blind hem ac cording to t he follow ing procedure .
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 66 GETTI.
Buttonhole S titching 67 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Buttonhol e Stitching Button holes can be sew n and button s can be sew n on. Five stit ches are av ailable for sew ing one-step buttonhol es. Stitch Name Pattern Applic ation Stitch Wid th [mm (inch.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 68 GETTI.
Buttonhole S titching 69 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX ■ If the button does not fit in the button gu ide plate Add togeth er the diam eter and thic kness of the button , and then se t the button g uide plate to t he calcu lated le ngth.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 70 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 8 Raise the presser foot lev er, remove the fabric, and cut the thread.
Buttonhole S titching 71 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX ■ Sewin g buttonholes on stretch fabrics When sewing buttonhole s on str etch fabrics , use a gimp t hread.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 72 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 4 Place the butto n into button-sewing f oot “M”.
Zipper Inse rtion 73 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Zipp er Inserti on A zippe r can b e sewn in place. Ther e are many method s for in sertin g zipper s. The pr ocedure s for i nserting a cente red zipp er and a side zip per are d escribed b elow.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 74 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 6 Select stitch .
Zipper Inse rtion 75 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 4 Press the seam allowance so that the rig ht side (the side that will not be stitched) ha s an extra 3 mm (1/8 inch).
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 76 GETTI.
Sewing S tretch Fabric s and Elas tic Tape 77 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Sewing Stretch Fabrics and Elastic Tape Stretch fabrics ca n be sewn and e lastic tap e can be attac hed. Observe the correspond ing precaut ions when pe rforming each o f the followin g stitching op erations.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 78 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 3 Select stitch .
Appliqué , Patchwor k and Quilt S titching 79 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Appliqué, Patchwork and Quil t Stitching The sti tches that can be u sed for sew ing appli qués, patchw ork and quilt s are des cribed below .
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 80 GETTI.
Appliqué , Patchwor k and Quilt S titching 81 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Patchwork (cra zy quilt) stitching 1 Fold the edg e of th e top p iece of fabr ic and place it over th e lower p iece. 2 Sew the two piece s of fabric tog ether so the pattern s pans over both pieces.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 82 GETTI.
Appliqué , Patchwor k and Quilt S titching 83 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX ■ Using th e optional quilting guid e Use the quilting guid e to sew paralle l stitches that are equal ly spa ced. 1 Insert the stem o f the quilter in to the hole a t the re ar of the wa lking fo ot or pr esser foo t holder .
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 84 GETTI.
Reinforceme nt Stitching 85 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Reinforcement Stitching Reinforce points that w ill be subject to st rain, such as sle eve holes, insea ms and pocket corn ers. Triple stretch stitching Use triple stre tch stitching t o reinforce sle eve holes and inseam s.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 86 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 2 Attach butt onhole fo ot “A”.
Eyelet Stitc hing 87 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Eyelet Stitching Eyelets, such as those on belts, can be se wn. Three siz es of eyelets are possible: 7 mm, 6 mm and 5 mm (1/4, 15/64 an d 3/16 inc h). 1 Attach mo nogramming foot “N”.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 88 GETTI.
Decorativ e Stitching 89 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Fagoting Stitching across an open sea m is called “fa goting”. It is used on bl ouses and child ren's clothi ng. This stitch is more deco rative whe n thicker thre ad is used.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 90 GETTI.
Decorativ e Stitching 91 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 5 Select stitch or . • For d etails, refer to “ Selectin g stitching” (page 5 8). 6 Stitch between t he stra ight stitc hes. 7 Pull out the threads for the straight stitches.
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 92 GETTI.
Decorativ e Stitching 93 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 2 Attach mo nogramming foot “N”. • For d etails, refer to “R eplacing th e presser foot” (page 35). 3 Select stitch . • For d etails, refer to “ Selectin g stitching” (page 5 8).
UTILIT Y ST ITCHES ———————— ———————— ———————— ——————————— ———————— ————————— —— — 94 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX S2_brotherE.
4 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX APPENDIX The variou s mainte nance and troubles hooting pr ocedures a re des cribed in t his chapt er. Stitch Setting s ................. .................... ............. .
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 96 GETTIN.
Stitch Se ttings 97 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Joining s titch J Patchwor k stitching and decorat ive stitching 4.
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 98 GETTIN.
Stitch Se ttings 99 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Decorative stitches N For decoration , etc. 7.0 (1/4) 0.0–7. 0 (0–1/4) 2.5 (3/32) 0.2 –4.0 (1/64–3/1 6) No Reinforce- ment No No N For decoration , etc.
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 100 GETTI.
Maintena nce 101 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX 3 Turn the b alance wh eel toward y ou until the tip of the shuttle hook alig ns with the edge of the race sh elf. 1 Shuttle r ace 2 Shuttle 3 Edge of t he shutt le race 4 Tip of the shuttle hook • Be sure to turn the bala nce wheel tow ard you.
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 102 GETTI.
Troublesho oting 103 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX The upp er thread b reaks. The up per thread w as not threaded correct ly (for example, the spool is not inst alled correctl y, the spool cap is to o big for t he sp ool being used , or the thread has co me out of the nee- dle ba r thread ho ok).
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 104 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX The fab ric is wrinkl ed.
Troublesho oting 105 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX The fab ric does not feed . The fe ed dogs are lo wered. Slide t he drop fe ed lever to the left. page 83 The stitc h is too fine. Len gthen the stit ch lengt h.
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 106 GETTI.
Changing the needle stop positi on 107 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Changing the needle sto p position Normall y, the sewing m achine is set to leave the needle in the fabric when sewin g is stopped . Instead, t he machine c an be set to l eave the n eedle raised wh en sewing is stopped.
APPENDIX ———————— ———————— ————————— —————————— ————————— ———————— ————— — 108 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX Index Symbol s + key .
Index 109 GETTING READ Y CONTENTS SEWING BASICS UT IL IT Y ST I TCHES APPENDIX INDEX P patchwork stitchi ng ..... ...... ........ ....... ...... ........ ....... ........ 81 piecing ....... ...... ......... ...... ...... ......... ...... ...... ......
ENGLISH 885-S06 XC5247-021 Printed in China.
An important point after buying a device Brother CS 8060 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brother CS 8060 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brother CS 8060 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brother CS 8060 you will learn all the available features of the product, as well as information on its operation. The information that you get Brother CS 8060 will certainly help you make a decision on the purchase.
If you already are a holder of Brother CS 8060, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brother CS 8060.
However, one of the most important roles played by the user manual is to help in solving problems with Brother CS 8060. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brother CS 8060 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
