Instruction/ maintenance manual of the product BE-1206-PC Brother
Go to page of 14
Machine Refere nce Title: Procedures for sewing a DST file using PC Date: February 4, 2009 Models: BE-0901-PC, BE-1201-PC, BE-1204-PC, BE-1206-PC BES-960, BES-962, BES-1240, BES-1260, BES-1262 Prep aration 1. Turn on the computer and start the Brother Embroidery Software, ECSC.
2. It may ask you if you want to save the design previously loaded. (This will save the design in an ECS format) Save – Save d esign without b eing able to change the file n ame. Save as – S ave design with b eing able to ch ange the file n ame. No – Will not s ave the design Left click on your selection.
Loading a DST f ile 1. Left click on the Explorer icon. 1. Left click on the drive or folder containing the DST file you want to read in. In this example the 3½ Floppy (A) is being used.
2. On the right hand side of the window, double left click on the design that you want to load. 3. A “Create Icon” window will be displayed. Left click on OK if this is the design.
4. 4. 4. 4. A window appears asking “How many times is feed required to be A window appears ask ing “How many times is feed required to be A window appears ask ing “How many times is feed requir.
Loading embroi dery hoop to use (Note: If using som e aftermarket hoo ps, such as a Fas tFrame, this ste p is optional.) 1. 1. 1. 1. L eft click on Left click on Left click on Left click on “Settings”. “Settings”. “Settings”. “Settings”.
3. There are two folders containing hoop outlines, Hoop and Hoop2. Please use the correct folder for your model. See below: (Note: These tw o folders are listed under C:Program FilesBES-960.) • HOOP - BE-0901- PC, BE-1201- PC, BES-960, BES-9 62, BES-1240, BES-1260, BES-1262 • HOOP2 - BE-120 4-PC, BE-1206-PC 4.
5. 5. 5. 5. T ry to use the smallest size hoop po ssible for good embroidery. Try to use the smallest size ho op possible for good embroidery. Try to use the smallest size ho op possible for good embroidery. Try to use the smallest size ho op possible for good embroidery.
Setting color se quence 1. Left click on the “Needle Bar Change” icon. 2. The “Needle Bar Change” window appears. Needle Bar Chang e icon.
3. The bottom colors, of the Needle Bar Change window, (1-12) represent the 12 needles on the machine. 4. In this example the design has 8 color changes. The top colors (1-8) represent the color changes in the design. 5. To select the 1 st color of the design to sew needle 12, you click and drag the color chang e bubbl e over needl e 12.
6. Now just drag each color change bu bble over the needl e on the machine that you want that color to be. 7. As you move each bubble over a needle you will notice that your design changes color to reflect the changes you have made . 8. You can click on the “Needle Bar Change” icon to make this window disappear.
Setting sew ing speed 1. All DST files loaded in to the software will default to the fastest “Speed Range”. Left click on the “Down” button to adjust if needed.
Sending design to the machine 1. Left click on the “Start” icon to send the design to machine. You are now finished on the computer. Send icon.
Operations on t he machine pan el 1. The “Ready” light should be on if the design was sent to the machine. 2. If “HOOP” is displayed on the machine panel, press . (Note: This will move the pantograph to match the pos ition of the des ign in the hoop fro m the computer.
An important point after buying a device Brother BE-1206-PC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brother BE-1206-PC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brother BE-1206-PC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brother BE-1206-PC you will learn all the available features of the product, as well as information on its operation. The information that you get Brother BE-1206-PC will certainly help you make a decision on the purchase.
If you already are a holder of Brother BE-1206-PC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brother BE-1206-PC.
However, one of the most important roles played by the user manual is to help in solving problems with Brother BE-1206-PC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brother BE-1206-PC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
