Instruction/ maintenance manual of the product BAS-311F-0 Brother
Go to page of 81
B AS-311F-0, 311F-L B AS-326F-0 Please read this ma nual be fore using the machine. Please kee p this manual w ithin easy reach for quick reference. PROGRAMMABLE ELECTRONIC P A TTERN SEWER INSTRUCTION.
BAS-31 1F-0, 31 1F-L, 326F-0 i Thank you very m uch for buying a BROT HER sewing m achine. Bef ore using your ne w m achine, pleas e read the safet y instruc tions belo w and the ex planat ions given in the ins tructio n m anual.
BAS-31 1F-0, 31 1F-L, 326F-0 ii 2 Notes on safety D ANGER Wait at least 5 m inutes after tur nin g off the p ower s witch an d d isc onnec tin g the p ower c ord f rom the wall ou tlet before o p enin g the face p late of the contro l box. T ouchin g areas where hi g h volta g es are p resent ca n result in seve re inju ry .
BAS-31 1F-0, 31 1F-L, 326F-0 iii CA UTION Sewing This sewing machine s hould onl y be used b y operators who have rec eived the neces sar y training i n safe us e beforehand. The s ewin g mac hine should not be used for an y applicatio ns other th an sewing.
BAS-31 1F-0, 31 1F-L, 326F-0 iv 3 W ar ning l abels The f ollowing warnin g labels appear on th e sewin g mac hine. Please f ollow t he i nst ruc tions on the labe ls at a ll t im es when us ing t he m ac hine. If the lab els h av e bee n r em oved or are diff icult to read, pleas e contact your near est Brot her dealer .
BAS-31 1F-0, 31 1F-L, 326F-0 CONTEN TS 1. NA ME OF MAJOR P ART S .......................................................................................................... 1 2. SPECIFICA TIONS ..........................................................
BAS-31 1F-0, 31 1F-L, 326F-0 6-8. Using the bobbin thread counter ............................................................................................................................... .. 34 6-9. Using production counter .....................
1. NAME OF MAJOR P ARTS BAS-31 1F-0, 31 1F-L, 326F-0 1 1. NAME OF MAJOR P ARTS (1) Powe r switch (2) Contr ol box (3) Oper ation panel (4) Pres ser lifter pedal (5) S tarting pedal (6) Motor c over (7.
2. SPECIFICA TIONS BAS-31 1F-0, 31 1F-L, 326F-0 2 2. SPECIFICA TIONS S titch for mation Single needle loc k stitch Sewing m achine Lock stitch, pattern tacking s ewing m achine (w ith large shutt le h.
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 3 3. INST ALLA TION CA UTION Machine installat ion should on ly be carried out b y a qualif ied technic ian. Contact your Broth er dealer or a qualif ied electrician for an y electrical work that m ay need t o be done.
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 4 3-1. T able pr ocessing dia g r am * If using a c omm ercially-a vailable table, proces s it as s hown in the illus tration be low . Note The thic kness of the table should b e at leas t 40 m m, and it s hould be strong enough t o bear the weight and vibrat ion of the sewing m ac hine.
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 5 3-3. Installing the contr ol bo x 1. Remove the s crews (1), and then ope n the co vers (panel mounting as sem bly (2) and m ain P .C. b oard m ounting plate (3)). Caution: W hen openin g the cover , hold it sec urel y so that it does not fall down.
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 6 3-4. Installing the r ubber cushions Install the rubb er cushions (1) with the nai ls (2). * Install so that the he ad of the n ail does not protrude from the rubber sur face. 3-5. Installing the oil pan 1.
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 7 3-6. Installing the cushions Place the t wo cus hions (1) int o the ho les in the work table, and secure them in pl ace with the nails (2) . * Install so that the he ad of the n ail does not protrude from the rubber sur face.
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 8 3-8. Installing the machine head 1. Insert the head h inges (1) into the m achine head so tha t they are paral lel, and then secur e them with the tw o set screws (2 ). 2. Place the m ac hine head gentl y on top of the r ubber c ushions (3) and cushions (4).
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 9 3-9. Tilting the sewing machine head BAS-31 1F-L, 326F -0 : Rem ove th e X feed bas e cov er (1) and th e f eed base co ver support (3) (be low) f rom the m achine head befor e tapping the head r est (5) ( next page) into the work table.
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 10 3. Move the press er arm as sembly (4) as far as it will go in the direct ion of the arro w in the illustration (to th e left when looking f rom the f ront of the sewing m achine). 4. T ap the head rest (5) in to the table h ole.
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 11 3-10. Connecting the gr ound wire CA UTION Be sure to connec t the ground. If the ground conn ection is not secur e, you run the r isk of receiving a ser ious electric s hock . Connection m ethod for 3-phase po wer suppl y 3-11.
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 12 6. Gentl y tilt back the mac hine head. Refer to “ 3-9. T ilting the se wing m achine head” . Note Be sure to have t wo or m ore people th ere when ti lting bac k the m achine head and retur ning it to its ori ginal position.
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 13 13. Securel y connect conn ectors P1 to P7, P14, P18, P23 and P26 as ind icated in table belo w . Note Check that the connector is facing t he corr ect way , and then insert it f irm ly until it lock s into plac e.
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 14 3-12. Installing the belt co v er 1. Loosen th e two sc rews (2) of the upper co ver (1) . 2. Insert the belt c over (3) in the direc tion of the ar row , and then secure it with the two s crews (2) and the t wo screws (4 ).
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 15 3-15. Installing the eye guard CA UTION Attach all saf ety dev ices bef ore using t he sewing m achine. If the m achine is used without th ese devic es attached, inj ury m ay result. Install the e ye guar d ass y (1) to the f ace pl ate with th e t wo screws (2 ).
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 16 3-16. Installing the prog r am mer (option) 1. Install the program m er support ( 2) to the work table with the two sc rews (1). 2. Insert the progr amm er connec tor (4) s ecurely into the left side of the operati on panel (3).
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 17 3-18. Installing the f eed base co v er suppor ts (B AS-311F-L, 326F-0) Loosen the f our sc rews (1) on the si de of the bed by about 2-3 turns, and .
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 18 3-20. Connecting the tubes (pneuma tic type only) Connect eac h air tube to the position with the c orrespond ing num ber .
3. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 19 3-20-1. Inst alling t he air unit Make s ure that the air un it does not t ouch the control box or the wor k table leg. <W he n inst alling t o the un der si de of the wor k ta bl e> 1. Remove the t wo scre ws (1) and th e valve sett ing plate ( 2).
4. L UBRICA TION BAS-31 1F-0, 31 1F-L, 326F-0 20 4. L UBRICA TION CA UTION Turn of f the po wer switch befor e starting lu bricatin g, other wise the m achine m ay operate if the foot s witch is depressed b y m istake, which cou ld result in injur y .
4. L UBRICA T ION/ 5. CORRECT OPERA TION BAS-31 1F-0, 31 1F-L, 326F-0 21 5. CORRECT OPERA TION 5-1. Selecting the needle and thread Needle Thread Main applicat ion DP X 5 # 9 #100 - #60 Knitted wear D.
5. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 22 5-3. T hr eading the upper thr ead CA UTION If the power switc h needs to be left on when car rying out threadi ng, be extremel y c afeful to obser ve all safet y precautions. The m achine ma y operate if the foot s witch is depr essed by m istak e, which could r esult i n injur y .
5. CORRECT OPERA TION BAS-31 1F-0, 31 1F-L, 326F-0 23 5-4. W inding the lo wer thread CA UTION Do not touch or p lace anything aga inst an y of the movin g parts while winding t he lower threa d, other wise personal injur y or dam age to the mac hine m ay result.
5. INST A LLA TION BAS-31 1F-0, 31 1F-L, 326F-0 24 5-5. R eplacing the bobbin case and thr eading the thr ead CA UTION If the power switc h n eeds to b e l eft on when carr ying out rep lac in g the bob bin, be ex trem el y caref ul to o bs erve all safet y precauti ons.
5. CORRECT OPERA TION BAS-31 1F-0, 31 1F-L, 326F-0 25 5-6-2. Lo wer thread tension 5-6-3. Upper thread tension Set the lo wer threa d tensi on to as weak a tens ion as possible and s o that th e bo bbin case dr ops by its o wn weight when the end of the thread is held.
6. USING TH E OPER A T IO N P ANEL BAS-31 1F-0, 31 1F-L, 326F-0 26 (5) 6. USING THE OP ERA TION P ANEL 6-1. Explanation of panel (1) POW ER indicator ....................... W h en the power is turned o n, th e in dicator lights to sho w that the po wer is on.
6. USING TH E OPER A T IO N P ANEL BAS-31 1F-0, 31 1F-L, 326F-0 27 (10) Bobbin T hread COUNT ER ........... Illum inates when bobbi n thread counter m ode has been s elected us ing the m enu indi cator switch (6). (1 1) SPLIT NO. indicator ...........
6. USING TH E OPER A T IO N P ANEL BAS-31 1F-0, 31 1F-L, 326F-0 28 6-2. Using the floppy disk <Comp atible types of floppy disk> Data type No. of stitches programm ed Data resolution Disk Format Wr i te enabled 300E type (300F type) 20,000 stitc hes per pattern 100 pattern Up to a maxi-m um of 360,000 sti tches 0.
6. USING TH E OPER A T IO N P ANEL BAS-31 1F-0, 31 1F-L, 326F-0 29 Setting th e flo ppy disk 1. Turn on the po wer s witch (1). The POW ER indic ator (2) will illum inate and the m ac hine m odel num ber will appear o n the displa y scr een.
6. USING TH E OPER A T IO N P ANEL BAS-31 1F-0, 31 1F-L, 326F-0 30 6-3. Using the prog r am R/W (R ead/Write) s witc h Programm ed stitc h patterns stored on flopp y disk c an be read into m emory , and ne wly programm ed patterns can be written to dis k f or perm anent storage and later recal l.
6. USING TH E OPER A T IO N P ANEL BAS-31 1F-0, 31 1F-L, 326F-0 31 6-4. Using the TEST s witch (Chec king the sewing pa tter n) Use the T EST switch to begin s ewing a gain fr om any desired point wh en the threa d break s or the bobb in thread runs out.
6. USING TH E OPER A T IO N P ANEL BAS-31 1F-0, 31 1F-L, 326F-0 32 6-5. Using the emer gency stop s witch Press the em er gency stop switc h to im m ediately stop the se wing m achine dur ing actual s ewing or when in the t est mode. C leari ng the er ror 1.
6. USING THE OPER A T ION P A NEL BAS-31 1F-0, 31 1F-L, 326F-0 33 6-6. A d justing the sewing SPE E D cont r o l The s ewing speed ca n be change d in steps of 100 rpm to the appropri ate speeds f or each s titch length s etting. 1. Press the ME NU switch (6) until t he SPEED indic ator (9) illum inates.
6. USING TH E OPER A T IO N P ANEL BAS-31 1F-0, 31 1F-L, 326F-0 34 6-8. Using the bobbin thread counter Set the bo bbin threa d counter to dis pla y the num ber of pieces of the selec ted pattern whic h can be se wn with the am ount of thread on th e bobbin to avoid run ning out of bobb in thread i n the middl e of a patern.
6. USING TH E OPER A T IO N P ANEL BAS-31 1F-0, 31 1F-L, 326F-0 35 6-9. Using production counter Both PRO. NO . and B.T . COUNT ER displa ys are available f or the five-dig it PRODUCT ION counter . 1. While pr essing t he TEST switch (15), press the B.
6. USING TH E OPER A T IO N P ANEL BAS-31 1F-0, 31 1F-L, 326F-0 36 6-10. Using single split mode By using si ngle split m ode, it is poss ible to c hange up t o 100 patterns imm ediately . 1. Mov e DIP swi tch B No. 1 to the ON pos ition. This will acti vate sing le split m ode.
6. USING TH E OPER A T IO N P ANEL BAS-31 1F-0, 31 1F-L, 326F-0 37 6-11. Shifting a st itch pa tter n Program s which ha ve already been pr ogramm ed can be m oved up, do wn and to th e left and right. (However , such patterns will be reset if the power suppl y is turned off or the program number is changed.
7. SEWING BAS-31 1F-0, 31 1F-L, 326F-0 38 7. SEWING CA UTION Turn of f the power s witch at the f ollo wing tim es, other wise the m achine m a y operate if the foot s witch is depressed b y m istake, which cou ld result in injur y .
7. SEWING BAS-31 1F-0, 31 1F-L, 326F-0 39 5. S tep on th e presser lifter switch (6) to raise th e presser foot. 6. Insert the work piece under the work clam p, and pres s the presser lifter switch (6) to lo wer the clam p. This is convenie nt when s ewing while s itting.
8. CLEANING AND INSPECTION BAS-31 1F-0, 31 1F-L, 326F-0 40 8. CLEA NING AND IN SPEC TION CA UTION Turn o ff the po wer switc h before car rying out cleaning , other wise the m ac hine ma y operate if the f oot switch is pressed b y mistake, whic h could r esult in i njur y .
8. CLEANING AND INSPECTION BAS-31 1F-0, 31 1F-L, 326F-0 41 8-4. Cleaning the control bo x air inlet por t Use vacuum cleaner to clean the f ilter in the air inlet port (2) of the control box ( 1) at least o nce a m onth. * If the m achine is us ed while th e air inl et port is block ed, the inside of the contr ol box wil l overheat.
9. ST AND ARD ADJUSTMENTS BAS-31 1F-0, 31 1F-L, 326F-0 42 (1) (2) (3) A a (1) (2) B b 9. ST AND ARD ADJUSTMENTS CA UTION Maintena nce and inspection of the s ewing machine shoul d only be c arried out by a qua lified technicia n.
9. ST AND ARD ADJUSTMENTS BAS-31 1F-0, 31 1F-L, 326F-0 43 (2) (3) Needle center l ine 0.01 - 0.08 mm (1) (2) (1) Tip 9-3. Adjust ing the needle c learance Turn the machine pulle y to align t he tip of the rotar y hook with t he needl e center line.
9. ST AND ARD ADJUSTMENTS BAS-31 1F-0, 31 1F-L, 326F-0 44 (1) (5) (7) (3) (4) (3) (2) Mark (1) B A (2) (3) 9-6. Adjusting the mo vable knife 1. Remove the top c over ( 1) while m ak ing this adjustm ent.
9. ST AND ARD ADJUSTMENTS BAS-31 1F-0, 31 1F-L, 326F-0 45 (2) (5) (4) (7) (3) (1) (6) (9) (10) 0.5 mm (8) (9) Movable knife waster A BC D Movable k nif e Fix kni fe Cutti ng edge Fig. 1 Cutti ng edge Cutti ng edge Cutti ng edge <Replacing t he mo vabl e an d fixed knives> 1.
9. ST AND ARD ADJUSTMENTS BAS-31 1F-0, 31 1F-L, 326F-0 46 (1) (2) Pin (5) (4) (7) (6) (5) (8) (3) (4) (3) (1) (2) 4. Fit the thread c utter connectin g rod (6) on connecti ng lever pin (7) , and install needle plate (5) .
9. ST AND ARD ADJUSTMENTS BAS-31 1F-0, 31 1F-L, 326F-0 47 (3) (9) (8) (6) (7) 0.5 - 1 mm 3 - 5 mm (4) (2) (5) (10) (14) (13) (1 1) (12) 9-8. Changing the pr esser foot lift <Standar d press er foot lift is 3 mm (max. 8 mm). > Adjust ing pr ess er foot li ft to 3 - 5mm 1.
9. ST AND ARD ADJUSTMENTS BAS-31 1F-0, 31 1F-L, 326F-0 48 (4) (3) (1) 15mm - 16 mm 35 mm 35 mm 25 mm 25 mm (3) (4) (6) (5) (1) (2) (6) (2) (5) approx. 2 m m 15 mm approx. 1 12 m m (2) 9-9. Adjusting the wiper <F or ver tic al wiper (stan dar d)> 1.
9. ST AND ARD ADJUSTMENTS BAS-31 1F-0, 31 1F-L, 326F-0 49 (3) (2) (1) 20 mm (1) (3) (2) (3) (2) (4) scale 20 mm (4) 9-10. Adjusting the two-step wor k c lamp lift amount The m ax im um work clam p lift am ount is 25 1 mm (f or solenoid t ype) or 30 1 mm (f or pneum atic t ype) from the top of the need le plate.
9. ST AND ARD ADJUSTMENTS BAS-31 1F-0, 31 1F-L, 326F-0 50 (1) (2) (4) (3) (2) (4) (3) (5) Scale 20 mm (5) (2) (4) (1) (3) 9-10-3. BAS-326F- 0 1. Turn on the air , and then press the pr esser lifter switch (1) to raise the pres ser f oot (2) . 2. Loosen the bo lts (5) of presser lifter lever UR (3) and press er lifter lever UL (4).
9. ST AND ARD ADJUSTMENTS BAS-31 1F-0, 31 1F-L, 326F-0 51 (6) (2) (4) (7) (5) (1) (3) 9-11. Adjusting the needle up stop po sition The needle up stop pos ition is adj usted so th at the in dex mark ( 2) on the machine pu lley (1) is inside the mark (4) on the belt cover (3) .
9. ST AND ARD ADJUSTMENTS BAS-31 1F-0, 31 1F-L, 326F-0 52 (3) (5) (6) (2) (7) (1) (4) 9-12. Chec king the input s ensor and DIP s witc h input 1. W hen the SPLIT NO.
9. ST AND ARD ADJUSTMENTS BAS-31 1F-0, 31 1F-L, 326F-0 53 (1) (2) (3) (4) (1) 9-13. Chec king the input v olta ge 1. T urn on the power s witch. 2. Press the m enu s witch (1) unti l the X -SCALE i ndicator (2) illum inates . 3. While pr essing t he TEST switch (3), pr ess the R/W s witch (4) 4.
10. DIP SWITCH BAS-31 1F-0, 31 1F-L, 326F-0 54 10. DIP SWIT CH Note All DIP switches ar e set to O FF at the tim e of shipment. W hen changing DIP switch, th e power m us t be off.
10.DIP SWITCH BAS-31 1F-0, 31 1F-L, 326F-0 55 DIP sw itch A S W No. W hen ON A -5 After sewing is com pleted, work clam p does not autom aticall y rise (onl y in split m ode) A -6 Clamping for ce outp.
10. DIP SWITCH BAS-31 1F-0, 31 1F-L, 326F-0 56 10-2. DIP s witc hes inside the contr ol bo x D ANGER Wait at least 5 m inutes after tur ning off the po wer s witch an d d isc onnec tin g the po wer c or d f rom the wall ou tlet before open ing the face plat e of the contro l box.
10.DIP SWITCH BAS-31 1F-0, 31 1F-L, 326F-0 57 DIP sw itch D S W No. W hen ON D -1 The first two stitch es at the se wing start will be s ewn at lo w speed (ap prox. 260 rpm ) D -2 The last two stitc hes at the s ewing end will be s ewn at lo w speed (appr ox.
11. CHANGING SPECIA L FUNCTION AND US ING THE MEMOR Y SW IT CHES BAS-31 1F-0, 31 1F-L, 326F-0 58 1286S 11. CHANGING SPECI AL FUNC TIONS AN D USING THE MEMOR Y SWIT CHES The f unctions of the switches on the operat ion panel c an be chang ed to carr y out speci al functio ns.
11. CHANGING SPECIA L FUNCTION AND US ING THE MEMOR Y SW IT CHES BAS-31 1F-0, 31 1F-L, 326F-0 59 Memor y switches (00 - 0F) Switch No. W hen ON me mo- 00 W hen moving to the h ome position, t he feed p late m oves in the order X Y and the start pos ition moves in the order Y X .
11. CHANGING SPECIA L FUNCTION AND US ING THE MEMOR Y SW IT CHES BAS-31 1F-0, 31 1F-L, 326F-0 60 Memor y switches (10 - 1F) Switch No. W hen ON mem o-10 Millin g device c an be used (av ailable as an option) memo- 1 1 Bobb in thread c ounter an d product ion counter ar e adjus ted when thre ad is trim m ed.
11. CHANGING SPECIA L FUNCTION AND US ING THE MEMOR Y SW IT CHES BAS-31 1F-0, 31 1F-L, 326F-0 61 Memor y switches (20 - 2F) Switch No. W hen ON me mo- 20 During feed test operat ion, jum p feeding 100 stitches at a time is poss ible using the ST EP BACK swi tch.
11. CHANGING SPECIA L FUNCTION AND US ING THE MEMOR Y SW IT CHES BAS-31 1F-0, 31 1F-L, 326F-0 62 Memor y switches (30 - 3F) T ur n the dial while pr essing the STEP BACK switch to change the values.
12. ERR OR CODES BAS-31 1F-0, 31 1F-L, 326F-0 63 12. ERR OR COD ES D ANGER Wait at least 5 m inutes after tur ning off the po wer s witch an d d isc onnec tin g the po wer c or d f r om the wall ou tlet before opening t he face plate of the control box.
12. ERR OR CODES BAS-31 1F-0, 31 1F-L, 326F-0 64 Code Cause Rem edy E.40 Flopp y disk is not inser ted or operatio n panel cab le is not secur ely connecte d. Insert a f loppy disk . If flopp y disk is already inserted, turn off the po wer and check the connectio ns of c ords inside the o peration panel.
12. ERR OR CODES BAS-31 1F-0, 31 1F-L, 326F-0 65 Code Cause Rem edy E.A0 S tart switch was press ed when there was no sewing ava ilable data. Read sewing d ata again. E.A1 Can not detect hom e position. X-Y feed or connection of hom e position s ensor is i ncorrec t.
13. GAUGE P ARTS LIST ACCORDING TO SUBCLASSES BAS-31 1F-0, 31 1F-L, 326F-0 66 13. GA UGE P A RTS LIST A CCORDING T O SUBCLASSES The f ollowing parts are ava ilable f or adding f urther f lexibility t o the range of appl ications .
13. GAUGE P ARTS LIST ACCORDING TO SUBCLASSES BAS-31 1F-0, 31 1F-L, 326F-0 67 BAS-326F- 0 Subclass 1A 2A 4A Part nam e/ S pecif icatio n Heavy m aterials Medium mater ials H eavy m aterials Needle hole p late ( φ 2.6) S10212-101 E ( φ 2.2) S10213-001 F ( φ 2.
14. TROUB LESH OOTING BAS-31 1F-0, 31 1F-L, 326F-0 68 14. TR OUBLESHO O TING * ......... For Air t ype Problem Cause Check Rem edy Page W ork clamp operation is sluggis h. Sliding par t of the wor k clam p lubrication Press er lifter air tube is bent or dam aged.
14. TROUB LESH OOTING BAS-31 1F-0, 31 1F-L, 326F-0 69 Problem Cause Check Rem edy Page Thr ead is too thic k fo r the needle. T hread and nee dle Upper thread br eaks . Thread tak e-up spring tension and height are incorre ct. T hread tak e-up s pring tension and height Damaged o r burred rotary hook, needle hol e plate or needle.
14. TROUB LESH OOTING BAS-31 1F-0, 31 1F-L, 326F-0 70 Needle bar lift am ount Upper th r ead is not trimmed. The mov a ble k nife does n ot pi c k up the t hread bec au se of skipp ed stitches at the sewing end. Skipped stitches at sewing end Movable k nif e position is incor rect.
14. TROUB LESH OOTING BAS-31 1F-0, 31 1F-L, 326F-0 71 Problem Cause Check Rem edy Page Unstable needle up stop positi on Electric al trouble Refe r to the details fo r [E.
15. OPTIO N BAS-31 1F-0, 31 1F-L, 326F-0 72 15. OPTIONS Programmer Used to create sewing patterns for the BAS- 300F ser ies. It can also be used to dis pla y error m essages .
15. OPTIO N BAS-31 1F-0, 31 1F-L, 326F-0 73 Needle cooler device This is a pneum atic- type needle c ooler which pre vents the thread breaking d ue to hea t.
INSTRUCTION MANUAL 15-1, Naes hiro-c ho, Mizuh o-k u, Nagoya 467- 8561, Ja pan. Phon e: 81-52-82 4-2177 Pringed in Japan BRO THER INDUSTRIES, L TD. 151-B1 1, B 12, B13, B26 S93B1 1-102 2001.
An important point after buying a device Brother BAS-311F-0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brother BAS-311F-0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brother BAS-311F-0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brother BAS-311F-0 you will learn all the available features of the product, as well as information on its operation. The information that you get Brother BAS-311F-0 will certainly help you make a decision on the purchase.
If you already are a holder of Brother BAS-311F-0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brother BAS-311F-0.
However, one of the most important roles played by the user manual is to help in solving problems with Brother BAS-311F-0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brother BAS-311F-0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
