Instruction/ maintenance manual of the product ST3HPMRXA Addonics Technologies
Go to page of 8
T E C H N O L O G I E S T echnical Support If you need any assistance to get your unit functioning properly , please have your product information ready and contact Addonics T echnical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www .
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Removing Cover of Storage T ower III Loosen the 3 screws at the back of the tower using a Philips screwdriver by turning counter-clockwise.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Dip Switch Settings Enable ERR Buzzer Function Auto- Rebuilding to Spare Dr.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Default factory DIP Switch setting: SW1 – RAID Setting DIP Switch BZS – Error buzzer function EZ – Automatic rebuilding to spare drive (one of the drives on the raid is set as a spare).
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Setting or Modifying the RAID Mode Using the JMicron HW RAID Manager Utility Program: 1. For Windows users, install the JMicron HW RAID Manager located on the SA T A Controller CD.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ Setting or Modifying the RAID Mode Using the JMicron HW RAID Manager Utility Program: 1. For Windows users, install the JMicron HW RAID Manager located on the SA T A Controller CD.
www .addonics.com T echnical Support (M-F 8:30am - 6:0 0pm PST) Phone: 408-453-621 2 Email: www .addonics.com/support/query/ f. Press the RAID setting button with a ball point pen. g. While pressing the RAID setting button turn on the system power where the HPM is connected.
www .addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www .addonics.com/sales/query/ CONT ACT US Notes on Spare Drives using the Easy RAID Setting (EZ) When EZ function is ENABLED, the auto-rebuilding to spare drive is automatic. The degraded RAID group will start rebuilding automatically by using the existing spare drive.
An important point after buying a device Addonics Technologies ST3HPMRXA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Addonics Technologies ST3HPMRXA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Addonics Technologies ST3HPMRXA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Addonics Technologies ST3HPMRXA you will learn all the available features of the product, as well as information on its operation. The information that you get Addonics Technologies ST3HPMRXA will certainly help you make a decision on the purchase.
If you already are a holder of Addonics Technologies ST3HPMRXA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Addonics Technologies ST3HPMRXA.
However, one of the most important roles played by the user manual is to help in solving problems with Addonics Technologies ST3HPMRXA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Addonics Technologies ST3HPMRXA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
